Relating bacterial dynamics and functions to gaseous emissions during composting of kitchen and garden wastes

Author(s):  
Zhicheng Xu ◽  
Yu Ma ◽  
Lanxia Zhang ◽  
Yiyu Han ◽  
Jing Yuan ◽  
...  
2021 ◽  
pp. 125028
Author(s):  
Zhicheng Xu ◽  
Wenjia Xu ◽  
Lanxia Zhang ◽  
Yu Ma ◽  
Yanming Li ◽  
...  

Author(s):  
О. Halak ◽  
N. Poltorak ◽  
О. Kravchuk ◽  
V. Synko ◽  
Y. Korol

Contamination of hazardous chemicals is currently considered one of the major environmental problems. The methods of purification of gaseous emissions depending on the physicochemical properties of pollutants, in particular dangerous chemical, their aggregate state, concentration in the gas environment are studied in this article. The effect of aerosol content such as dust and soot is analyzed as well as the efficiency of purification methods at different temperature intervals, methods of purification of multicomponent mixtures. The comparative characteristics of thermochemical, reagent, sorption and catalytic methods are given and the prospects of their application in filtering systems of stationary and mobile objects are evaluated. It has been proved that almost any organic compounds can be oxidized (mineralized) on the TiO2surface. In practice, any photocatalytic air purifier includes a porous TiO2 deposited carrier, which is irradiated with ultraviolet rays and through which air is purged. Photocatalysis is suitable for domestic use as it can occur at room temperature. For example, a thermocatalytic method of destroying harmful substances requires preheating the air to a temperature above 200 ° C. Photocatalysis destroys substances that penetrate even through activated carbon filters. Features of formation of oxide coatings by plasma-electrolytic oxidation of titanium alloys are considered. It is proposed to refine the design of collective defense systems on armored vehicles and stationary facilities with additional installation in the filter-absorber of the grid with the deposited layer of catalytic material, which will neutralize various types of dangerous chemicals due to photocatalytic air purification.


2007 ◽  
Vol 2 (1) ◽  
Author(s):  
A. Ros ◽  
C. Canals-Batlle ◽  
M.A. Lillo-Ródenas ◽  
E. Fuente ◽  
M. A. Montes-Morán ◽  
...  

This paper focuses on the valorisation of solid residues obtained from the thermal treatment of sewage sludge. In particular, sewage sludge samples were collected from two waste water treatment plants (WWTPs) with different sludge line basic operations. After drying, sludges were heated up to 700 °C in appropriate ovens under diluted air (gasification) and inert (pyrolysis) atmospheres. The solids obtained, as well as the dried (raw) sludges, were characterised to determine their textural properties and chemical composition, including the speciation of their inorganic fraction. All the materials under study were employed as adsorbents/catalysts in H2S removal experiments at room temperature. It was found that, depending on the particular sludge characteristics, outstanding results can be achieved both in terms of retention capacities and selectivity. Some of the solids outperform commercially available sorbents specially designed for gaseous emissions control. In these adsorbents/catalysts, H2S is selectively oxidised to elemental sulphur most likely due to the presence of inorganic, catalytically active species. The role of the carbon-enriched part on these solids is also remarked.


2021 ◽  
Vol 193 (4) ◽  
Author(s):  
R. Kelman Wieder ◽  
Melanie A. Vile ◽  
Kimberli D. Scott ◽  
Cara M. Albright ◽  
James C. Quinn ◽  
...  

AbstractIncreasing gaseous emissions of nitrogen (N) and sulfur (S) associated with oil sands development in northern Alberta (Canada) has led to changing regional wet and dry N and S deposition regimes. We assessed the potential for using bog plant/lichen tissue chemistry (N and S concentrations, C:N and C:S ratios, in 10 plant/lichen species) to monitor changing atmospheric N and S deposition through sampling at five bog sites, 3–6 times per growing season from 2009 to 2016. During this 8-year period, oil sands N emissions steadily increased, while S emissions steadily decreased. We examined the following: (1) whether each species showed changes in tissue chemistry with increasing distance from the Syncrude and Suncor upgrader stacks (the two largest point sources of N and S emissions); (2) whether tissue chemistry changed over the 8 year period in ways that were consistent with increasing N and decreasing S emissions from oil sands facilities; and (3) whether tissue chemistry was correlated with growing season wet deposition of NH4+-N, NO3−-N, or SO42−-S. Based on these criteria, the best biomonitors of a changing N deposition regime were Evernia mesomorpha, Sphagnum fuscum, and Vaccinium oxycoccos. The best biomonitors of a changing S deposition regime were Evernia mesomorpha, Cladonia mitis, Sphagnum fuscum, Sphagnum capillifolium, Vaccinium oxycoccos, and Picea mariana. Changing N and S deposition regimes in the oil sands region appear to be influencing N and S cycling in what once were pristine ombrotrophic bogs, to the extent that these bogs may effectively monitor future spatial and temporal patterns of deposition.


Author(s):  
Gabriela Ventura Silva ◽  
Anabela O. Martins ◽  
Susana D. S. Martins

Indoor air pollution has obtained more attention in a moment where “stay at home” is a maximum repeated for the entire world. It is urgent to know the sources of pollutants indoors, to improve the indoor air quality. This study presents some results obtained for twelve incense products, used indoors, at home, and in temples, but also in spa centers or yoga gymnasiums, where the respiratory intensity is high, and the consequences on health could be more severe. The focus of this study was the gaseous emissions of different types of incense, performing a VOC screening and identifying some specific VOCs different from the usual ones, which are known or suspected to cause severe chronic health effects: carcinogenic, mutagenic, and reprotoxic. Thirteen compounds were selected: benzene, toluene, styrene, naphthalene, furfural, furan, isoprene, 2-butenal, phenol, 2-furyl methyl ketone, formaldehyde, acetaldehyde, and acrolein. The study also indicated that incense cone type shows a higher probability of being more pollutant than incense stick type, as from the 12 products tested, four were cone type, and three of them were in the group of the four higher polluters. Benzene and formaldehyde presented worrying levels in the major part of the products, above guideline values established by the WHO. Unfortunately, there are no limit values established for indoor air for all the compounds studied, but this fact should not exempt us from taking action to alert the population to the potential dangers of using those products. From this study, acetaldehyde, acrolein, furfural, and furan emerge as compounds with levels to deserve attention.


Chemosphere ◽  
2021 ◽  
pp. 131129
Author(s):  
Woo Jin Chung ◽  
Soon Woong Chang ◽  
Dhiraj Kumar Chaudhary ◽  
Joung Du Shin ◽  
Hyunook Kim ◽  
...  

2022 ◽  
Vol 169 ◽  
pp. 104164
Author(s):  
Tingting An ◽  
Feng Wang ◽  
Lingling Ren ◽  
Shihan Ma ◽  
Shuangyi Li ◽  
...  

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3420
Author(s):  
Marc Jofre ◽  
Lluís Jofre ◽  
Luis Jofre-Roca

The investigation of the electromagnetic properties of biological particles in microfluidic platforms may enable microwave wireless monitoring and interaction with the functional activity of microorganisms. Of high relevance are the action and membrane potentials as they are some of the most important parameters of living cells. In particular, the complex mechanisms of a cell’s action potential are comparable to the dynamics of bacterial membranes, and consequently focusing on the latter provides a simplified framework for advancing the current techniques and knowledge of general bacterial dynamics. In this work, we provide a theoretical analysis and experimental results on the microwave detection of microorganisms within a microfluidic-based platform for sensing the membrane potential of bacteria. The results further advance the state of microwave bacteria sensing and microfluidic control and their implications for measuring and interacting with cells and their membrane potentials, which is of great importance for developing new biotechnologically engineered systems and solutions.


Sign in / Sign up

Export Citation Format

Share Document