In this research we has investigated synthesis and electrical properties of ITO (Indium Tin Oxide) thin layers doping Aluminum (Al) and ZnO with spin-coating technique through sol-gel process and calcined at ±550 ºC for 1 hour. Effect of Al and ZnO doping on the conductivity of ITO with 0%, 1%, 3% and 5% w/v dopant concentration and the number of coating (4 and 5 layers) has reported. ITO-Al has 2 phases, these are rhombohedral and cubic, the crystal size is 67.31 nm. Meanwhile, ITO-ZnO are rhombohedral, cubic (bixbyite) and hexagonal (wurtzite), with crystallite size value was 67.4 nm. The surface morphology data indicated film thickness was 3.4 µm (ITO-Al) and 0.974 nm (ITO-ZnO). The electrical properties shows that the optimum film in 4 layers coating with the addition of 5% doping value was 17 kΩ/cm2 (ITO-Al) and 5-layered by addition of 5% of doping ZnO (80.800 kΩ/cm2). Meanwhile, ITO-Al thin film with 4 layers coating without doping was 9.331 kΩ / cm2, and for ITO-ZnO (5 layers) coating without doping was 11.796 kΩ/cm2. Al and ZnO doping decrease the electrical conductivity of ITO.
Synthesis and Electrical Properties of ZnO-ITO and Al-ITO thin Film by Spin Coating Technique Through Sol Gel Process