scholarly journals A drift-correlated ground motion intensity measure: Application to steel frame buildings

2020 ◽  
Vol 132 ◽  
pp. 106096
Author(s):  
Luis A. Pinzón ◽  
Yeudy F. Vargas-Alzate ◽  
Luis G. Pujades ◽  
Sergio A. Diaz
2020 ◽  
Vol 36 (2) ◽  
pp. 718-740
Author(s):  
Esra Zengin ◽  
Norman A Abrahamson ◽  
Sashi Kunnath

The debate over the significance of ground-motion duration is long-standing and the literature on the influence of duration on structural response is extensive. Decoupling of the duration from other characteristics of the ground motion is crucial for accurate quantification of its effect on structural responses. This article presents a new methodology that isolates the duration from the amplitude, frequency content, and rate of energy build-up of the ground motion. This is achieved by selecting short- and long-duration record pairs that are equated on the basis of spectral shape and the slope of the Husid plot. The use of the initial rate of Arias Intensity as a control parameter is novel in the literature. The proposed approach enables the examination of the sole effect of the duration on structural responses of 2-story and 9-story steel frame buildings. We find that the maximum interstory-drift ratios are not generally sensitive to the duration differences between short- and long-duration record sets, whereas the cumulative damage parameters (i.e. dissipated hysteretic energy and Modified Park–Ang Damage Index) of the buildings considered in this study are affected by duration. Finally, we extend the study to collapse limit states and find that duration has a small effect on structural collapse capacity, after controlling three key ground-motion parameters.


1979 ◽  
Vol 6 (2) ◽  
pp. 173-185
Author(s):  
J. L. Humar

A study is made of the feasibility and usefulness of a seismic design method for multistorey steel-frame buildings. The method employs a time-series elastic response analysis of the structure for a ground motion compatible with a design response spectrum. The correlation between the elastic and elasto-plastic response is investigated and it is suggested that the design forces in the members of an elasto-plastic structure can be obtained by applying appropriate reduction factors to the forces obtained in an elastic analysis.A design example is presented in which a multistorey steel-frame building with a rather large setback is designed for seismic forces by using the results of an elastic dynamic analysis for a selected ground motion and reducing the forces so obtained by applying one uniform force reduction factor to all girder moments and another, a smaller one, to all column moments and axial loads.


2018 ◽  
Vol 763 ◽  
pp. 116-123 ◽  
Author(s):  
Massimiliano Ferraioli ◽  
Angelo Lavino ◽  
Alberto Mandara ◽  
Marianna Donciglio ◽  
Antonio Formisano

In this paper, a design procedure that combines both progressive collapse design under column removal scenario and capacity design to produce a hierarchy of design strengths is presented. The procedure develops in the context of the European Standards, using the classification of European steel sections and considering the seismic design features. Three-dimensional models of typical multi-storey steel frame buildings are employed in numerical analysis. The design for progressive collapse is carried out with three types of analysis, namely linear static, nonlinear static and nonlinear dynamic. Since the behaviour following sudden column loss is likely to be inelastic and possibly implicate catenary effects, both geometric and material nonlinearities are considered. The influence of the fundamental parameters involved in seismic and robustness design is finally investigated.


Sign in / Sign up

Export Citation Format

Share Document