Model test study on horizontal bearing behavior of pile under existing vertical load

2012 ◽

Vol 446-449 ◽

pp. 1804-1807

Author(s):

Fan Li Meng ◽

Guang Yu Sun ◽

Cheng Yuan Lu

Keyword(s):

Bearing Capacity ◽

Model Test ◽

Bending Moment ◽

Horizontal Displacement ◽

Combined Loading ◽

Horizontal Load ◽

Vertical Deformation ◽

Vertical Load ◽

Disk Diameter ◽

Test Study

In order to study how it influence the horizontal bearing capacity of the disk pile when there exists a vertical load, a group of model tests has been designed. Three double-disk piles were used in the test, and the distance of the two disks is 5 times as the disk diameter. First drew a vertical load V=200N/300N/400N on the top of pile1/2/3 respectively, then put on the horizontal load stage by stage. And by the test, we can study the differences of the pile bearing properties such as changes in the pile bending moment, the horizontal and vertical deformation on the top. Experiment showed that when the vertical load is quite small（V=200N、300N）, the existence of vertical load has little to do with horizontal bearing capacity. When a vertical load increases to a certain value（V=400N）, The maximum bending moment and horizontal displacement of the pile under the same horizontal load reduce, which indicates that the disks of the pile play a significant role in bearing combined loading.

Download Full-text

A Model Test Study on the Effect of the Stern Interceptor for the Reduction of the Resistance and Trim Angle for Wave-piercing Hulls

Journal of the Society of Naval Architects of Korea ◽

10.3744/snak.2015.52.6.485 ◽

2015 ◽

Vol 52 (6) ◽

pp. 485-493 ◽

Cited By ~ 1

Author(s):

Dae Hyuk Kim ◽

Inn-Duk Seo ◽

Key-Pyo Rhee ◽

Nakwan Kim ◽

Jin-Hyung Ahn

Keyword(s):

Model Test ◽

Test Study

Download Full-text

Behavior Characteristics of Single Batter Pile under Vertical Load

Applied Sciences ◽

10.3390/app11104432 ◽

2021 ◽

Vol 11 (10) ◽

pp. 4432

Author(s):

Jiseong Kim ◽

Seong-Kyu Yun ◽

Minsu Kang ◽

Gichun Kang

Keyword(s):

Bearing Capacity ◽

Relative Density ◽

Model Test ◽

Ground Surface ◽

Bending Moment ◽

Vertical Position ◽

Vertical Load ◽

Behavior Characteristics

The purpose of this study is to grasp the behavior characteristics of a single batter pile under vertical load by performing a model test. The changes in the resistance of the pile, the bending moment, etc. by the slope of the pile and the relative density of the ground were analyzed. According to the results of the test, when the relative density of the ground was medium and high, the bearing capacity kept increasing when the angle of the pile moved from a vertical position to 20°, and then decreased gradually after 20°. The bending moment of the pile increased as the relative density of the ground and the batter angle of the pile increased. The position of the maximum bending moment came closer to the ground surface as the batter angle of the pile further increased, and it occurred at a point of 5.2~6.7 times the diameter of the pile from the ground surface.

Download Full-text