Investigation of surface and mechanical properties of Anodic Aluminium Oxide (AAO) developed on Al substrate for an electronic package enclosure

2020 ◽  
Vol 401 ◽  
pp. 126273 ◽  
Author(s):  
Muralidharan Sundararajan ◽  
Mutharasu Devarajan ◽  
Mariatti Jaafar
Keyword(s):  
Mechanical Properties ◽  
Aluminium Oxide ◽  
Electronic Package ◽  
Anodic Aluminium Oxide

Mechanical Properties and Residual Stress Measurements in Anodic Aluminium Oxide Structures Using Nanoindentation

2005 ◽  
Vol 31 (3) ◽  
pp. 356-363 ◽  
Author(s):  
S. H. Ko ◽  
D. W. Lee ◽  
S. E. Jee ◽  
H. C. Park ◽  
K. H. Lee ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Residual Stress ◽  
Aluminium Oxide ◽  
Stress Measurements ◽  
Anodic Aluminium Oxide

scholarly journals A Macroporous TiO2 Oxygen Sensor Fabricated Using Anodic Aluminium Oxide as an Etching Mask

Sensors ◽  
2010 ◽  
Vol 10 (1) ◽  
pp. 670-683 ◽  
Author(s):  
Chih-Cheng Lu ◽  
Yong-Sheng Huang ◽  
Jun-Wei Huang ◽  
Chien-Kuo Chang ◽  
Sheng-Po Wu
Keyword(s):  
Oxygen Sensor ◽  
Aluminium Oxide ◽  
Anodic Aluminium Oxide ◽  
Etching Mask

The Effect of Al2O3-SiC and B4 Cadditions on Mechanical Properties of Cusnmatrix Composites for Cutting Tools

2013 ◽  
Vol 685 ◽  
pp. 15-18 ◽  
Author(s):  
Kerim Emre Öksüz ◽  
Hanlar Bağirov ◽  
Hasan Yilmaz ◽  
Buket Silahşor ◽  
Vedat Yildirim
Keyword(s):  
Mechanical Properties ◽  
Boron Carbide ◽  
Cutting Tools ◽  
Aluminium Oxide ◽  
Optical Microscope ◽  
Wear Behaviour ◽  
Reinforcement Particle ◽  
Matrix Composites ◽  
Hardness Values ◽  
Structural Aspects

Keywords: Boron Carbide; Silisium Carbide; Composite; Powder Metallurgy. Abstract : In this study, effect of boron carbide (B4C), aluminium oxide (Al2O3) and silisium carbide (SiC) addition on microstructure and mechanical properties of diamond cutting segments was investigated. The effects of reinforcement particle additions on characteristic of CuSn matrix composites have been investigated. For this purpose, Al2O3, SiC and B4C addition quantity was added as 2 wt.%. Samples of segments were processed by cold pressing at 550 MPa, followed by sintering at 850°C/30min. Micro-structural aspects were observed by optical microscope. Density, hardness and wear tests were also performed. Wear behaviour and hardness values of segments changed depending on aluminium oxide, silisium carbide and boron carbide addition. The alloy CuSn– 2 wt.%. B4C presented the best results, available for use in cutting tools.

Effects of Pretreatment and the First Anodization Time on Morphology of Anodic Aluminium Oxide Templates

2011 ◽  
Vol 181-182 ◽  
pp. 707-711 ◽  
Author(s):  
Yu Cheng Wu ◽  
Jie Wu Cui ◽  
Yan Wang ◽  
Guang Qing Xu ◽  
Xin Yi Zhang
Keyword(s):  
Aluminium Oxide ◽  
Sem Images ◽  
Anodization Time ◽  
Effect Mechanism ◽  
Anodic Aluminium Oxide ◽  
Purity Aluminium ◽  
High Purity Aluminium ◽  
Aluminium Sheets ◽  
Anodization Method ◽  
Scanning Electron

Anodic aluminium oxide(AAO) templates were fabricated by a two-step anodization method utilizing high purity aluminium sheets. On the basis of getting the optimum preparation parameters of AAO templates, effects of the pretreatment and the first anodization time on morphology of AAO templates were studied. Field emission scanning electron microscope(FESEM) was used to investigate surface morphology of AAO templates. The SEM images indicated that both pretreatment and the first anodization time had a significant influence on morphology of AAO templates. Meanwhile,effect mechanism of pretreatment and the first anodization time on AAO templates morphology was elucidated.

scholarly journals On the anodic aluminium oxide refractive index of nanoporous templates

2015 ◽  
Vol 48 (45) ◽  
pp. 455105 ◽  
Author(s):  
A Hierro-Rodriguez ◽  
P Rocha-Rodrigues ◽  
F Valdés-Bango ◽  
J M Alameda ◽  
P A S Jorge ◽  
...  
Keyword(s):  
Refractive Index ◽  
Aluminium Oxide ◽  
Anodic Aluminium Oxide ◽  
Nanoporous Templates
Sign in / Sign up

Export Citation Format

Share Document