Analysis of James Ross Island volcanic complex and sedimentary basin based on high-resolution aeromagnetic data

2013 ◽  
Vol 585 ◽  
pp. 90-101 ◽  
Author(s):  
M.E. Ghidella ◽  
O.M. Zambrano ◽  
F. Ferraccioli ◽  
J.M. Lirio ◽  
A.F. Zakrajsek ◽  
...  
2021 ◽  
Author(s):  
Alessandro Ghirotto ◽  
Andrea Zunino ◽  
Egidio Armadillo ◽  
Laura Crispini ◽  
Fausto Ferraccioli

<p>The Mt. Melbourne Volcanic Complex (MMVC) is located in Northern Victoria Land (Antarctica) along the western flank of the West Antarctic Rift System, at the boundary with the Transantarctic Mountains. It is constituted by two main volcanic areas, i.e. the Mt. Melbourne Edifice (MME) and the Cape Washington Shield (CWS), and some other minor centres.</p><p>To date, the inner structure of this volcanic complex is still poorly known, being the direct geological information on site confined to either glacial erratics or a few rock outcrops not hidden by the ice sheet. Consequently, even the temporal building up and evolution of the MMVC as well as its primary magmatic source are still under investigation (debated).</p><p>Recently, we attempted to define the geological structure of the MMVC by means of digital enhancement and forward modeling performed on a high-resolution aeromagnetic dataset (Ghirotto et al. 2020, EGU). Coupling both information derived from past geological/geophysical studies and unpublished magnetic susceptibility measurements from rock samples collected in the field, we proposed two models to explain the chronological evolution of the MME and CWS. These models involve either i) major magmatic events occurred in periods of both normal and reverse magnetic polarity or ii) only magmatic flows with normal polarity.</p><p>To gain further insights into the geological structure and the geodynamic evolution of the MMVC in relation to the two proposed models, we develop here a Hamiltonian Monte Carlo (HMC) algorithm (Fichtner et al. 2018) based on the probabilistic approach to inverse problems. To date, this methodology has never been applied to aeromagnetic data for geological studies. In detail, the above proposed models provide some soft a priori information from which to start exploring potential solutions. The parameterization of the volcanic area is defined in terms of 2-D polygonal bodies, representing e.g. magmatic lava flows, where the unknown parameters are represented by both the position of the vertices and/or the magnetization (induced and/or remnant), resulting in a non-linear forward model. The HMC algorithm requires the computation of gradients of the posterior probability density (PPD), i.e., derivatives of the objective functional with respect to the position of vertices of the bodies and magnetization, in order to better move the inversion process toward high-probability areas in the model space manifold. We implement such calculations using automatic differentiation, a tool which is very accurate and fast compared to other approaches such as finite difference. The result of the inversion is then a collection of models representing the PPD, from which statistical analysis can provide measures of uncertainty and plausible geological scenarios.</p><p>In this study we present some preliminary results of applying the above-mentioned methodology, which finally could help unravel the framework of the MMVC.</p>


2021 ◽  
Vol 25 (4) ◽  
pp. 585-590
Author(s):  
H. Musa ◽  
N.E. Bassey ◽  
R. Bello

The study of high-resolution aeromagnetic data was carried out over the Gongola basin, upper Benue trough, northeastern Nigeria, for analytic signal depth determination. Total intensity magnetic map obtained from the data using the Oasis Montaj TM programming software was used to get the residual map by polynomial fitting, from where the analytic signal was obtained with the use of anomaly width at half the amplitude (X1/2). This was used to carry out depth estimations over the study area. The results showed that it peaks over the magnetic structure with local maxima over its edges (boundaries or contact), and the amplitude is simply related to magnetization, likewise results also showed that the depth estimates were in the range of 1.2 to 5.9 km and were calculated for contact, dyke/sill and horizontal cylinder respectively. The lowest values are from DD profiles, while the highs are from AA profiles. This work is important in identifying dykes, contacts and intrusives over an area.


Geophysics ◽  
1971 ◽  
Vol 36 (4) ◽  
pp. 695-716 ◽  
Author(s):  
B. K. Bhattacharyya

An automatic method has been developed for compilation of digital aeromagnetic data. This method has been applied to the data obtained during a high‐sensitivity aeromagnetic survey over an area in the Precambrian shield of northeastern Ontario in Canada. With this method, all points of intersection between traverse and base lines are determined automatically and adjusted within the limits of positional error for minimizing differences in magnetic values at the intersections. Then the data are corrected for diurnal variation and leveled to tie the magnetic measurements together. Next, the resulting total field values are contoured with a machine method at a scale of 1:25,000. For such a scale, the minimum contour interval that can be used in the present area is two gammas. However, because of the accuracy of the method of compilation, with a larger scale, it is possible to trace one‐gamma contours. The maps thus compiled have been compared with published aeromagnetic maps of data obtained with conventional flux‐gate and proton‐precession magnetometers. The new maps are vastly superior to the old ones for delineating trends, patterns, and fine features of available detailed geological maps. This superiority is mainly due to the excellent definition of small amplitude anomalies, some of only a few gammas in magnitude, on the high‐resolution magnetic maps.


2020 ◽  
Author(s):  
Anne Obermann ◽  
Pilar Sánchez-Pastor ◽  
Alejandro Duran ◽  
Tobias Diehl ◽  
Vala Hjörleifsdóttir ◽  
...  

<p>For the future development of deep geothermal energy exploitation in Europe, large magnitude induced seismic events are an obstacle. On the other hand, the analysis of induced microseismicity allows to obtain the spatial distribution of fractures within the reservoir, which can help, not only to identify active faults that may trigger large induced seismic events, but also to optimize hydraulic stimulation operations and to locate the regions with higher permeability, enhancing energy production. The project COSEISMIQ (COntrol SEISmicity and Manage Induced) integrates seismic monitoring and imaging techniques, geomechanical models and risk analysis methods with the ultimate goal of implementing innovative tools for the management of the risks posed by induced seismicity and demonstrate their usefulness in a commercial scale application in Iceland.</p><p>Our demonstration site is the Hengill region in Iceland. The Hengill volcanic complex is located in SW Iceland on the plate boundary between the North American and Eurasian plates. In this region, the two largest geothermal power plants of Iceland are currently in operation, the Nesjavellir (120MW electricity) and the Hellisheidi (300MW electricity) power stations. In October 2018, we densified the permanent seismic network run by ISOR and IMO in this area (14 stations) with 23 broadband seismic stations.</p><p>We present the project and show first results from high resolution imaging of the shallow crust with ambient seismic noise, as well as first results from the relocated seismic events. The ambient noise imaging highlights an area of low seismic velocity close to the Þingvallavatn Lake, characteristic for the presence of supercritical fluids. The main geothermal production area is located as well in a low velocity zone that reaches 200 meters depth below Hellisheidi and around 700 meters below Nesjavellir.</p><p> </p>


1995 ◽  
Vol 32 (2) ◽  
pp. 167-176 ◽  
Author(s):  
Pierre Verpaelst ◽  
A. Shirley Péloquin ◽  
Erick Adam ◽  
Arthur E. Barnes ◽  
John N. Ludden ◽  
...  

The Abitibi–Grenville Lithoprobe project completed a regional (line 21) and a high-resolution (line 21-1) seismic survey in the Noranda Central Volcanic Complex of the Blake River Group, Abitibi, Quebec. Line 21 provides a regional framework in which the Archean crust is divided into three layers, two of which are discussed here: the uppermost layer, which corresponds to the Blake River Group, is the least reflective, and lies above 4 s (12 km), and the mid-crustal layer, which is composed of a complex pattern of generally east-northeast-dipping reflectors and lies between 4 and 8 s. Within the regional data, the Mine Series of the Central Volcanic Complex is imaged as a semitransparent series of reflectors overlying a highly reflective east-facing structure interpreted as the subvolcanic Flavrian pluton. The high-resolution data (line 21-1) were collected in the vicinity of the Ansil mine. The seismic images in this region can be controlled by surface geology and extensive drill-hole data, and the project was designed to test the applicability of seismic reflection profiling in providing structural and stratigraphic information for use in mineral exploration: shallow-dipping reflectors correlate well with lithological variations or contacts in the volcanic sequence; strong subhorizontal reflectors correspond to diorite and gabbro dykes and sills; several abrupt lateral changes in the reflectivity coincide with known intrusive contacts such as the Lac Dufault pluton.


Sign in / Sign up

Export Citation Format

Share Document