Fabrication of ZnO and CuCrO2:Mg thin films by pulsed laser deposition with in situ laser annealing and its application to oxide diodes

2008 ◽  
Vol 516 (18) ◽  
pp. 5941-5947 ◽  
Author(s):  
Te-Wei Chiu ◽  
Kazuhiko Tonooka ◽  
Naoto Kikuchi
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Laser Annealing ◽  
Pulsed Laser ◽  
Laser Deposition

Luminescent Characteristics of Pulsed Laser Deposited Epitaxial Eu-Doped Y2O3 Films

1999 ◽  
Vol 574 ◽  
Author(s):  
D. Kumar ◽  
K. G. Cho ◽  
Zhang Chen ◽  
V. Craciun ◽  
P. H. Holloway ◽  
...  
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Epitaxial Growth ◽  
Yttrium Oxide ◽  
Lattice Mismatch ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Deposition Technique ◽  
Deposition Parameters

AbstractThe growth, structural and cathodoluminescent (CL) properties of europium activated yttrium oxide (Eu:Y2O3) thin films are reported. The Eu:Y2O3 films were grown in-situ using a pulsed laser deposition technique. Our results show that Eu:Y2O3 films can grow epitaxially on (100) LaAlO3 substrates under optimized deposition parameters. The epitaxial growth of Eu:Y2O3 films on LaAlO3, which has a lattice mismatch of ∼ 60 %, is explained by matching of the atom positions in the lattices of the film and the substrate after a rotation. CL data from these films are consistent with highly crystalline Eu:Y2O3 films with an intense CL emission at 611 nm.

Pulsed Laser Deposition of High-Quality Manganite Thin Films at Low Background Pressures with in-situ Reflection High Energy Electron Diffraction

2019 ◽  
Vol 3 (9) ◽  
pp. 55-63 ◽  
Author(s):  
Antonello Tebano ◽  
Carmela Aruta ◽  
Pier Gianni Medaglia ◽  
Giuseppe Balestrino ◽  
Norberto G. Boggio ◽  
...  
Keyword(s):  
Thin Films ◽  
Electron Diffraction ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
High Energy ◽  
Laser Deposition ◽  
High Energy Electron ◽  
High Quality ◽  
Low Background

Microwave Phase Shifters: Epitaxial Growth by Pulsed Laser Deposition of Dielectric Ba0.5Sr0.5TiO3 Thin Films on MgO

2005 ◽  
Vol 902 ◽  
Author(s):  
YauYau Tse ◽  
P. S. Suherman ◽  
T. J. Jackson ◽  
I. P. Jones
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Strain Relaxation ◽  
Pulsed Laser ◽  
Phase Shifters ◽  
Laser Deposition ◽  
Ex Situ ◽  
Misfit Dislocations ◽  
Epitaxial Relationship

AbstractBa0.5Sr0.5TiO3 (BSTO) thin films were grown on (001) MgO using pulsed-laser deposition (PLD). The microstructures of in-situ and ex-situ annealed BSTO films were studied by X-ray diffraction and transmission electron microscopy (TEM). The films showed a cube on cube epitaxial relationship with <100> BSTO // <100> MgO. They were essentially single crystals with a columnar structure and possessed smooth surfaces. The interfaces of the BSTO films and substrates were atomically sharp, with misfit dislocations. Better crystallinity and full strain relaxation was obtained in films grown in 10-1 mbar oxygen and annealed ex-situ. A 30% increase in dielectric tuneability was achieved compared with in-situ annealing and deposition at 10-4 mbar. Threading dislocations are the dominant defects in the films grown in 10-1 mbar oxygen and annealed ex-situ, while the films with in-situ annealing show columnar structures with low angle boundaries.

In situ grown epitaxial YBa2Cu3O7−x thin films by pulsed laser deposition under reduced oxygen pressure during cool-down time

2006 ◽  
Vol 252 (13) ◽  
pp. 4573-4577 ◽  
Author(s):  
Maria Branescu ◽  
A. Vailionis ◽  
I. Ward ◽  
J. Huh ◽  
G. Socol
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Oxygen Pressure ◽  
Pulsed Laser ◽  
Laser Deposition

In-situ fabrication of Y-Ba-Cu-oxide thin films by pulsed laser deposition

1991 ◽  
Vol 27 (2) ◽  
pp. 1459-1462 ◽  
Author(s):  
R.M. Bowman ◽  
A.I. Ferguson ◽  
C.M. Pegrum
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Oxide Thin Films ◽  
In Situ Fabrication

Epitaxial growth of CaF2 thin films on (100) GaAs by pulsed-laser deposition and in-situ annealing

1991 ◽  
Vol 12 (5) ◽  
pp. 335-338 ◽  
Author(s):  
S.S. Shushtarian ◽  
S.B. Ogale ◽  
G.N. Chaudhari ◽  
P. Singh ◽  
V.J. Rao
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Epitaxial Growth ◽  
Pulsed Laser ◽  
Laser Deposition

In-Situ Magnetic Field Induced Structure and Properties of Epitaxial Spinel Ferrite Thin Films Prepared by Pulsed Laser Deposition (PLD) (Dynamic Aurora PLD Method)

2004 ◽  
Vol 853 ◽  
Author(s):  
Naoki Wakiya ◽  
Toyokazu Nagamune ◽  
Kazuo Shinozaki ◽  
Nobuyasu Mizutani
Keyword(s):  
Magnetic Field ◽  
Thin Films ◽  
Magnetic Properties ◽  
Pulsed Laser Deposition ◽  
Deposition Rate ◽  
Spinel Ferrite ◽  
Pulsed Laser ◽  
Lattice Parameter ◽  
Laser Deposition

ABSTRACTThe influence of an in-situ magnetic field on the plume during pulsed laser deposition (PLD) to prepare epitaxial nickel zinc ferrite (NZF) thin films were investigated. An air core coil (solenoid coil) was installed between a target and a substrate, and up to 43 mT of magnetic field was generated by direct current (DC)(Dynamic Aurora PLD method). Application of magnetic field brought about following structural and property changes;(1) deposition rate was almost doubled, (2) the concentration of Ni and Zn in the film was decreased, (3) lattice parameter was unchanged, and (4) magnetization and coercivity was increased. Since deposition rate was increased by application of magnetic field, films with same thickness was also prepared without magnetic field, however, magnetic properties were unchanged. This indicates that application of in-situ magnetic field improved magnetic properties.

Sign in / Sign up

Export Citation Format

Share Document