In situ grown epitaxial YBa2Cu3O7−x thin films by pulsed laser deposition under reduced oxygen pressure during cool-down time

2006 ◽  
Vol 252 (13) ◽  
pp. 4573-4577 ◽  
Author(s):  
Maria Branescu ◽  
A. Vailionis ◽  
I. Ward ◽  
J. Huh ◽  
G. Socol
2000 ◽  
Vol 15 (10) ◽  
pp. 2249-2265 ◽  
Author(s):  
Jeanne M. McGraw ◽  
John D. Perkins ◽  
Falah Hasoon ◽  
Philip A. Parilla ◽  
Chollada Warmsingh ◽  
...  

We have found that by varying only the substrate temperature and oxygen pressure five different crystallographic orientations of V2O5 thin films can be grown, ranging from amorphous to highly textured crystalline. Dense, phase-pure V2O5 thin films were grown on SnO2/glass substrates and amorphous quartz substrates by pulsed laser deposition over a wide range of temperatures and oxygen pressures. The films' microstructure, crystallinity, and texturing were characterized by electron microscopy, x-ray diffraction, and Raman spectroscopy. Temperature and oxygen pressure appeared to play more significant roles in the resulting crystallographic texture than did the choice of substrate. A growth map summarizes the results and delineates the temperature and O2 pressure window for growing dense, uniform, phase-pure V2O5 films.


1999 ◽  
Vol 574 ◽  
Author(s):  
D. Kumar ◽  
K. G. Cho ◽  
Zhang Chen ◽  
V. Craciun ◽  
P. H. Holloway ◽  
...  

AbstractThe growth, structural and cathodoluminescent (CL) properties of europium activated yttrium oxide (Eu:Y2O3) thin films are reported. The Eu:Y2O3 films were grown in-situ using a pulsed laser deposition technique. Our results show that Eu:Y2O3 films can grow epitaxially on (100) LaAlO3 substrates under optimized deposition parameters. The epitaxial growth of Eu:Y2O3 films on LaAlO3, which has a lattice mismatch of ∼ 60 %, is explained by matching of the atom positions in the lattices of the film and the substrate after a rotation. CL data from these films are consistent with highly crystalline Eu:Y2O3 films with an intense CL emission at 611 nm.


2017 ◽  
Vol 727 ◽  
pp. 1273-1279 ◽  
Author(s):  
Shihui Yu ◽  
Binhui Zhu ◽  
Haoran Zheng ◽  
Lingxia Li ◽  
Siliang Chen ◽  
...  

2003 ◽  
Vol 94 (1) ◽  
pp. 594-597 ◽  
Author(s):  
L. Yan ◽  
L. B. Kong ◽  
J. S. Pan ◽  
C. K. Ong

2019 ◽  
Vol 45 (10) ◽  
pp. 13518-13522 ◽  
Author(s):  
Shan Jiao ◽  
Yi Zhang ◽  
Zhihua Duan ◽  
Tao Wang ◽  
Yanxue Tang ◽  
...  

2005 ◽  
Vol 479 (1-2) ◽  
pp. 12-16 ◽  
Author(s):  
Andreas Heinrich ◽  
Bernd Renner ◽  
Robert Lux ◽  
Stefan G. Ebbinghaus ◽  
Armin Reller ◽  
...  

2019 ◽  
Vol 3 (9) ◽  
pp. 55-63 ◽  
Author(s):  
Antonello Tebano ◽  
Carmela Aruta ◽  
Pier Gianni Medaglia ◽  
Giuseppe Balestrino ◽  
Norberto G. Boggio ◽  
...  

2005 ◽  
Vol 902 ◽  
Author(s):  
YauYau Tse ◽  
P. S. Suherman ◽  
T. J. Jackson ◽  
I. P. Jones

AbstractBa0.5Sr0.5TiO3 (BSTO) thin films were grown on (001) MgO using pulsed-laser deposition (PLD). The microstructures of in-situ and ex-situ annealed BSTO films were studied by X-ray diffraction and transmission electron microscopy (TEM). The films showed a cube on cube epitaxial relationship with <100> BSTO // <100> MgO. They were essentially single crystals with a columnar structure and possessed smooth surfaces. The interfaces of the BSTO films and substrates were atomically sharp, with misfit dislocations. Better crystallinity and full strain relaxation was obtained in films grown in 10-1 mbar oxygen and annealed ex-situ. A 30% increase in dielectric tuneability was achieved compared with in-situ annealing and deposition at 10-4 mbar. Threading dislocations are the dominant defects in the films grown in 10-1 mbar oxygen and annealed ex-situ, while the films with in-situ annealing show columnar structures with low angle boundaries.


Sign in / Sign up

Export Citation Format

Share Document