Interfacial microstructure and mechanical properties of C/C composites and Nb joints brazed with Cu75Pt25 filler metal

Vacuum ◽  
2018 ◽  
Vol 157 ◽  
pp. 202-209 ◽  
Author(s):  
Y. Luo ◽  
H. Bian ◽  
H.W. Niu ◽  
Y.Y. Song ◽  
Z.B. Chen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Filler Metal ◽  
Interfacial Microstructure ◽  
Microstructure And Mechanical Properties

Microstructure and Mechanical Properties of the Wide-Gap Region Brazed with Various Powder Mixing Ratios of Additive to Filler Metal Powders

2006 ◽  
Vol 118 ◽  
pp. 479-484 ◽  
Author(s):  
Yong Hwan Kim ◽  
S.I. Kwun
Keyword(s):  
Mechanical Properties ◽  
Metal Powder ◽  
Room Temperature ◽  
Filler Metal ◽  
Metal Powders ◽  
Powder Mixing ◽  
Factors Affecting ◽  
Mixing Ratios ◽  
Microstructure And Mechanical Properties ◽  
Wide Gap

This study investigated the microstructure and mechanical properties of the wide-gap region brazed with various powder mixing ratios of additive powder (IN738) to filler metal powder (DF4B). The wide-gap brazing process was carried out in a vacuum of 2×10-5 torr at 1230°C for 1 hr. The microstructure of the brazed region was analyzed by FESEM and AES. The wide-gap region brazed with 60wt.% IN738 additive powder and 40 wt.% DF 4B filler metal powder had a microstructure consisting of Ni solid solution + γ' and (Cr, W)2B. The fracture strength of the wide-gap region brazed with 60 wt.% IN738 additive and 40 wt.% DF 4B powder was as high as 832 MPa at room temperature. It was found that the (Cr, W)2B and pores in the brazed region are important microstructural factors affecting the mechanical properties of the wide-gap brazed region.

Interfacial microstructure and mechanical properties of titanium/steel dissimilar joining

2022 ◽  
Vol 307 ◽  
pp. 131069
Author(s):  
Qiaoling Chu ◽  
Tuo Xia ◽  
Lin Zhang ◽  
Pengkang Zhao ◽  
Min Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Interfacial Microstructure ◽  
Dissimilar Joining ◽  
Microstructure And Mechanical Properties

scholarly journals Evaluation of Biomedical Ti/ZrO2 Joint Brazed with Pure Au Filler: Microstructure and Mechanical Properties

Metals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 526
Author(s):  
Yuzhen Lei ◽  
Hong Bian ◽  
Wei Fu ◽  
Xiaoguo Song ◽  
Jicai Feng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Energy Dispersive Spectrometry ◽  
Filler Metal ◽  
Interfacial Microstructure ◽  
Holding Time ◽  
X Ray Diffraction ◽  
X Ray ◽  
Medical Products ◽  
Metallurgical Bonding ◽  
Brazed Joints

Titanium and zirconia (ZrO2) ceramics are widely used in biomedical fields. This study aims to achieve reliable brazed joints of titanium/ZrO2 using biocompatible Au filler for implantable medical products. The effects of brazing temperature and holding time on the interfacial microstructures and mechanical properties of titanium/Au/ZrO2 joints were fully investigated by scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS) and X-ray diffraction (XRD). The results indicated that the typical interfacial microstructure of the titanium/Au/ZrO2 joint was titanium/Ti3Au layer/TiAu layer/TiAu2 layer/TiAu4 layer/TiO layer/ZrO2 ceramic. With an increasing brazing temperature or holding time, the thickness of the Ti3Au + TiAu + TiAu2 layer increased gradually. The growth of the TiO layer was observed, which promoted metallurgical bonding between the filler metal and ZrO2 ceramic. The optimal shear strength of ~35.0 MPa was obtained at 1150 °C for 10 min. SEM characterization revealed that cracks initiated and propagated along the interface of TiAu2 and TiAu4 reaction layers.

Sign in / Sign up

Export Citation Format

Share Document