Se-O Bond Is Unique to High Se Enriched Sweet Potato Stem Protein with Better Antioxidant Ability

Sweet potato plants were treated with selenium (Se). Spraying Se on the sweet potato leaves was an effective Se enrichment method and proteins were extracted from the sweet potato stem. The structural characteristics of the protein were investigated. Fourier transform infrared spectroscopy (FT-IR) detected more signals from the Se-enriched sweet potato stem protein (SSP), and the number of forms of Se chemical bonds gradually increased with increasing Se content, such as the Se-O bond in high Se-enriched SSP, indicating altered secondary structures.Scanning electron microscopy-energy dispersive spectrometry (SEM-EDS) indicated more Se atoms in the Se-enriched SSPs (SSSPs). The DSC results revealed that Se enrichment enhanced the thermal stability of the samples. Moreover, selenomethionine (SeMet), selenocystine (SeCys2), and methylselenocysteine (MeSeCys) were determined to be the main Se forms in the SSSPs. Furthermore, the SSSPs showed relatively higher superoxide anion radical and DPPH radical scavenging activities than the blank, which indicates that SSSPs can be used as antioxidants. By recovering the proteins, the agricultural by-product—sweet potato stem can be further utilized, and the obtained Se-enriched proteins may contribute to human health.

Electrodeposition, Characterization, and Corrosion Behavior of CoCrFeMnNi High-Entropy Alloy Thin Films

Potentiostatic electrodeposition was used to obtain CoCrFeMnNi high-entropy alloy (HEA) thin films on copper substrate. An electrolyte based on a DMSO (dimethyl sulfoxide)-CH3CN (acetonitrile) organic compound was used for the HEA deposition. The microstructure of the high-entropy deposits before and after corrosion in artificial seawater was investigated by scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) investigation. SEM analysis revealed that compact and uniform film consists of compact and uniform 50 nm–5 μm particles that form the HEA films. The successful co-deposition of all five elements was highlighted by the energy dispersive spectrometry investigation (EDS). Electrochemical measurements carried out in an aerated artificial seawater solution under ambient conditions demonstrated the promising potential for application in the field of anti-corrosion protection, due to the protective behavior of the HEA thin films.

Friction welding of high Cr white cast iron to AISI 1030 steel with Ni interlayer

In this study, the effect of friction time on microstructure and weldability of AISI 1030 steel with nickel interlayer and high chromium white cast iron welded by the friction welding method were investigated experimentally. The weld joints were produced with 2000 rpm rotational speed, under 80 MPa friction pressure, 150 MPa forging pressure, for 8 s forging time and 8, 10 and 12 s friction times. After the friction welding process, the microstructures of the weld interfaces were analyzed by optical microscopy, scanning electron microscopy, energy dispersive spectrometry, elemental mapping and X-ray diffraction analysis. The results were lateron compared theoretically and experimentally. The increasing friction time led to high frictional heat input. The results indicated that friction time plays a vital role on the microstructure and weldability.

Experimental Study on the Phase Relations of the SiO2-MgO-TiO2 System in Air at 1500°C

We investigated the phase relations of the SiO2-MgO-TiO2 system in air at 1500°C using the high-temperature isothermal equilibration/quenching technique, followed by x-ray diffraction measurements and direct phase analysis using scanning electron microscopy coupled with x-ray energy dispersive spectrometry. One single liquid phase domain, five two-phase domains (liquid-TiO2, liquid-cristobalite, liquid-MgO·SiO2, liquid-2MgO·SiO2, and liquid-MgO·2TiO2), and five three-phase regions (liquid-TiO2-MgO·2TiO2, liquid-MgO·SiO2-cristobalite, liquid-TiO2-cristobalite, liquid-MgO·SiO2-2MgO·SiO2 and liquid-2MgO·SiO2-MgO·2TiO2) were observed. We constructed a 1500°C isothermal phase diagram based on the experimentally measured liquid compositions. We compared simulations using MTDATA and FactSage thermodynamic software and their databases with the experimental results obtained in this study. These results can be used to provide guidelines for updating the MTDATA and FactSage titania-bearing thermodynamic databases by reassessing the thermodynamic properties of the phase with new experimental data.

Micro-Stratigraphical Investigation on Corrosion Layers in Ancient Bronze Artefacts of Urartian Period by Scanning Electron Microscopy, Energy-Dispersive Spectrometry, and Optical Microscopy

The results of the analysis on some fragments of bronze belts and a bowl discovered from southwestern Armenia at the Yegheghnadzor archaeological site are discussed. The samples are dated to the 7–6th millennium BCE from the Urartian period. The artefacts were corroded, and a multilayer structure was formed. To study the stratigraphy of layers and their composition, the samples have been analyzed using SEM-EDS (Scanning Electron Microscopy, Energy-Dispersive Spectrometry) and OM (Optical Microscopy) techniques. The bronze finds appear with the typical incrustations rich in alloy alteration compounds. Concentrations of copper and tin in the alloys were quantified by SEM-EDS: the pattern and the percentage of the alloy are the same for the belts. Regarding the bowl sample, it is constituted by two foils perfectly in contact but different in color, thickness, and composition. The results evidenced that only two elements participate in forming the alloy composition in the samples: Cu and Sn. The tin content is variable from 7.75% to 13.56%. Other elements such as Ag, As, Fe, Ni, P, Pb, Sb, and Zn make up less than 1% and can be considered as impurities.

Corrosion Behavior of Zn, Fe and Fe-Zn Powder Materials Prepared via Uniaxial Compression

Powder metallurgy is one of the most prevalent ways for metallic degradable materials preparation. Knowledge of the properties of initial powders used during this procedure is therefore of great importance. Two different metals, iron and zinc, were selected and studied in this paper due to their promising properties in the field of biodegradable implants. Raw powders were studied using scanning electron microscopy (SEM) coupled with energy dispersive spectrometry (EDX). Powders (Fe, Zn and Fe-Zn in a weight ratio of 1:1) were then compressed at the pressure of 545 MPa to the form of pellets with a diameter of 1.7 cm. Surface morphology and degradation behavior in the Hanks´ solution were studied and evaluated. Electrochemical polarization tests along with the static immersion tests carried out for 21 days were employed for corrosion behavior characterization. The highest corrosion rate was observed for pure Zn powder followed by the Fe-Zn and Fe, respectively. A mixed Fe-Zn sample showed similar properties as pure zinc with no signs of iron degradation after 21 days due to the effect of galvanic protection secured by the zinc acting as a sacrificial anode.

Towards building a Cathodoluminescence (CL) database for pigments: characterization of white pigments

Paintings and painted surfaces are considered to be extremely complex due to their multitude of materials and thus form the basis for particularly intricate Cultural Heritage studies. The combination of Scanning Electron Microscopy (SEM) with Cathodoluminescence (CL) can serve as a powerful tool for the identification of individual pigments. SEM/CL has the potential of identifying both organic and inorganic pigments and can focus on a micrometer or even nanometer scale. The combination with Energy Dispersive Spectrometry (EDS) allows for robust, cross-checked, elemental and mineralogical characterization of pigments. In order to apply SEM/CL in a routine-based way for the identification of pigments, it is necessary to have a robust, open-access database of characteristic CL spectra of pigments. A large project has been undertaken to create such a database, focusing primarily at the pigments, both organic and inorganic, which were most commonly used from antiquity until today. In the present paper, the CL characterization of common white pigments is presented. White pigments were selected, due to their significance and frequency of use, since they were also present on the ground layers or mixed with other pigments in most of the painting layers. More specifically, the CL spectra of samples in pure form of calcite, kaolinite, lead white, zinc oxide, barium sulfate, lithopone and titanium white are presented. In all cases, the CL spectra present characteristic bands, which allow for a secure identification of the pigments. In order to facilitate comparison with other databases, EDS and RAMAN spectra are also presented. Additionally, the effect of weathering on the CL spectra was evaluated, by comparison to naturally and artificially aged samples and to pigments identified on areas of two paintings, of the 19th and 20th c., respectively. Finally, the effect of binding media was also studied, using combination of pigments with four common media: egg yolk, linseed, walnut and poppy oil. Overall, both weathering and binding media appear to cause minor differences in the occurring spectra, without preventing the identification of pigments.

Friction Stir Spot Butt Welding of Dissimilar S45C Steel and 6061-T6 Aluminum Alloy

Friction stir spot welding (FSSW) of dissimilar S45C steel and 6061-T6 aluminum alloy in a butt configuration is experimentally investigated. Butt spot welding is performed using a convex scrolled shoulder tool at different tool rotational speeds. FSSW butt joints are successfully fabricated by offsetting the tool to the steel side. The microstructures of the joints fabricated at three different tool rotational speeds are characterized using scanning electron microscopy and energy dispersive spectrometry. Microstructural analysis shows the presence of intermetallic compounds (IMCs) along the steel/aluminum interface. The thickness of the IMC layer and the tensile strength of the joint increase with increasing the tool rotational speed. The results of tensile tests and microstructural analysis show that the joint performance is closely related to the IMCs at the joint interface.

Surface orange patinas on the limestone of the Batalha Monastery (Portugal): characterization and decay patterns

Samples of orange patinas found on a limestone window tracery and an ornament of the Batalha Monastery have been investigated by X-ray micro-diffractometry (μ-XRD) and low-vacuum scanning electron microscopy coupled with energy dispersive spectrometry (LV-SEM + EDS). The aim of the study was to determine the composition of the layered patinas, assess whether they have been intentionally applied or naturally formed, and study their degradation patterns. Preliminary results revealed that the orange patinas on the window tracery and the ornament showed different compositions and appearance, suggesting distinct formation pathways. Orange patinas on the ornament, which are now showing decay and delamination patterns, mainly consisted of gypsum with hematite as a minor component, implying the possibility of an intentional application of a mixture of ochre and lime as tint plaster. Orange patinas on the window tracery show, instead, the presence of Ca-oxalates, abundant weddellite, and minor whewellite, with minor hematite suggesting the yellowish/orange color as being due to Ca-oxalate patinas imbedding soil dust airborne particles. Such patina was possibly formed naturally either by the chemical attack due to atmospheric air pollutants from traffic exhausts emissions or by bacterial activity. No delamination was observed on the window tracery sample with granular decohesion as the major decay phenomenon. A comparison was made between this patina and the so-called scialbatura, a surface yellowish coating often found by conservators on limestone and marble in ancient monuments in the Mediterranean region.

Phase Transformation of Alumina, Silica and Iron Oxide during Carbothermic Reduction of Fly Ash for Ceramics Production

Fly ash is a by-product from burning of coal. Utilization of fly ash by carbothermic reduction is an effective way to recover aluminum, silicon, and iron to enhance product-added value. This work is focused on the phase transformation of Al2O3, SiO2 and Fe2O3 during carbothermic reduction of fly ash in air. A comparative analysis of carbothermic reduction of fly ash in air and in nitrogen was made. Thermodynamics analysis was performed to illustrate the possible reactions for residue and condensate. X-ray diffraction (XRD), scanning electronic microscope (SEM), and energy dispersive spectrometry (EDS) were employed to characterize the phase composition, surface morphology, and microstructure of the reduced products. Results show that Fe3Si and Fe2Si appear sequentially with increasing of temperature. Al5O6N is an intermediate compound. Residue of Al9FeSi3, Al, and Si, and condensate of SiC, AlN and C are obtained. β-SiAlON was not found in the residue. Nitrogen is involved in the reduction of Al2O3 but not in the reduction of SiO2 and Fe2O3. Carbothermic reduction of fly ash in air did not behave the same as fly ash in nitrogen.