Fretting wear of pure cobalt chromium and nickel to identify the distinct roles of HS25 alloying elements in high temperature glaze layer formation

Wear ◽  
2017 ◽  
Vol 376-377 ◽  
pp. 1043-1054 ◽  
Author(s):  
Ariane Viat ◽  
Alixe Dreano ◽  
Siegfried Fouvry ◽  
Maria-Isabel De Barros Bouchet ◽  
Jean-François Henne
Keyword(s):  
High Temperature ◽  
Fretting Wear ◽  
Alloying Elements ◽  
Layer Formation ◽  
Cobalt Chromium ◽  
Pure Cobalt

STOODY 4

Alloy Digest ◽  
1977 ◽  
Vol 26 (4) ◽  
Keyword(s):  
Solid Solution ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Tungsten Alloy ◽  
High Temperature Strength ◽  
Cobalt Chromium ◽  
Temperature Performance

Abstract STOODY 4 is a cobalt-chromium-tungsten alloy with excellent high-temperature strength and excellent resistance to corrosion. This alloy derives its high-temperature strength from the high tungsten-to-carbon ratio which allows a large percentage of tungsten to remain in solid solution. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-75. Producer or source: WRAP Division, Stoody Company.

FEDERATED F150.5

Alloy Digest ◽  
1975 ◽  
Vol 24 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Aluminum Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Alloying Elements ◽  
Light Weight ◽  
Temperature Performance

Abstract FEDERATED F150.5 is a heat-treatable aluminum alloy containing silicon and copper as the major alloying elements. It is recommended for high-strength, light-weight, pressure-tight castings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Al-219. Producer or source: Federated Metals Corporation, ASARCO Inc..

ALLEGHENY LUDLUM AL-6XN PLUS

Alloy Digest ◽  
2005 ◽  
Vol 54 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Alloying Elements ◽  
Temperature Performance

Abstract The AL-6XN PLUS alloy is an enhanced version of the AL-6XN alloy (see Alloy Digest SS-494, May 1988). Both satisfy the composition requirements of UNS N08367, but AL-6XN PLUS contains a greater concentration of the alloying elements (Cr, Mo, and N) which promote corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: SS-923. Producer or source: Allegheny Ludlum Corporation. Originally published April 2005, revised June 2005.

scholarly journals Critical View on Buffer Layer Formation and Monolayer Graphene Properties in High-Temperature Sublimation

2021 ◽  
Vol 11 (4) ◽  
pp. 1891
Author(s):  
Vallery Stanishev ◽  
Nerijus Armakavicius ◽  
Chamseddine Bouhafs ◽  
Camilla Coletti ◽  
Philipp Kühne ◽  
...  
Keyword(s):  
High Temperature ◽  
Charge Carrier ◽  
Buffer Layer ◽  
Free Charge Carrier ◽  
Monolayer Graphene ◽  
Free Charge ◽  
Layer Formation ◽  
Free Hole ◽  
Sublimation Growth ◽  
Insulating Substrates

In this work we have critically reviewed the processes in high-temperature sublimation growth of graphene in Ar atmosphere using closed graphite crucible. Special focus is put on buffer layer formation and free charge carrier properties of monolayer graphene and quasi-freestanding monolayer graphene on 4H–SiC. We show that by introducing Ar at higher temperatures, TAr, one can shift the formation of the buffer layer to higher temperatures for both n-type and semi-insulating substrates. A scenario explaining the observed suppressed formation of buffer layer at higher TAr is proposed and discussed. Increased TAr is also shown to reduce the sp3 hybridization content and defect densities in the buffer layer on n-type conductive substrates. Growth on semi-insulating substrates results in ordered buffer layer with significantly improved structural properties, for which TAr plays only a minor role. The free charge density and mobility parameters of monolayer graphene and quasi-freestanding monolayer graphene with different TAr and different environmental treatment conditions are determined by contactless terahertz optical Hall effect. An efficient annealing of donors on and near the SiC surface is suggested to take place for intrinsic monolayer graphene grown at 2000 ∘C, and which is found to be independent of TAr. Higher TAr leads to higher free charge carrier mobility parameters in both intrinsically n-type and ambient p-type doped monolayer graphene. TAr is also found to have a profound effect on the free hole parameters of quasi-freestanding monolayer graphene. These findings are discussed in view of interface and buffer layer properties in order to construct a comprehensive picture of high-temperature sublimation growth and provide guidance for growth parameters optimization depending on the targeted graphene application.

High Temperature Mechanical Properties of Ni-Al-Cr Based Alloys with Refractory Alloying Elements

2006 ◽  
Vol 510-511 ◽  
pp. 358-361
Author(s):  
Won Yong Kim ◽  
Han Sol Kim ◽  
In Dong Yeo ◽  
Mok Soon Kim
Keyword(s):  
High Temperature ◽  
Volume Fraction ◽  
Lattice Parameter ◽  
Alloying Elements ◽  
Solid Solution Hardening ◽  
High Temperature Strength ◽  
High Temperature Mechanical Properties ◽  
Die Materials ◽  
The Matrix ◽  
Effective Role

We report on advanced Ni3Al based high temperature structural alloys with refractory alloying elements such as Zr and Mo to be apllied in the fields of die-casting and high temperature press forming as die materials. The duplex microstructure consisting of L12 structured Ni3Al phase and Ni5Zr intermetallic dispersoids was observed to display the microstructural feature for the present alloys investigated. Depending on alloying elements, the volume fraction of 2nd phase was measured to be different, indicating a difference in solid solubility of alloying elements in the matrix γ’ phase. Lattice parameter of matrix phase increased with increasing content of alloying elements. In the higher temperature region more than 973K, the present alloys appeared to show their higher strength compared to those obtained in conventional superalloys. On the basis of experimental results obtained, it is suggested that refractory alloying elements have an effective role to improve the high temperature strength in terms of enhanced thermal stability and solid solution hardening.

Effect of Alloying Elements on the High-Temperature Tempering of Fe-0.3N Martensite

2020 ◽  
pp. 116612
Author(s):  
Shao-Wen Young ◽  
Mitsutaka Sato ◽  
Kazuhiro Yamamitsu ◽  
Yusuke Shimada ◽  
Yongjie Zhang ◽  
...  
Keyword(s):  
High Temperature ◽  
Alloying Elements ◽  
Effect Of Alloying

Self-propagating high-temperature synthesis microalloying of MoSi2 with Nb and V

2003 ◽  
Vol 18 (8) ◽  
pp. 1842-1848 ◽  
Author(s):  
F. Maglia ◽  
C. Milanese ◽  
U. Anselmi-Tamburini ◽  
Z. A. Munir
Keyword(s):  
Solid Solution ◽  
High Temperature ◽  
Tetragonal Phase ◽  
Synthesis Method ◽  
The Self ◽  
Alloying Elements ◽  
Alloying Element ◽  
Temperature Synthesis ◽  
Starting Mixture ◽  
High Temperature Synthesis

Microalloying of MoSi2 to form Mo(1−x)MexSi2 (Me = Nb or V) was investigated by the self-propagating high-temperature synthesis method. With alloying element contents up to 5 at.%, a homogeneous C11b solid solution was obtained. For higher contents of alloying elements, the product contained both the C11b and the hexagonal C40 phases. The relative amount of the C40 phase increases with an increase in the content of alloying metals in the starting mixture. The alloying element content in the hexagonal C40 Mo(1−x)MexSi2 phase was nearly constant at a level of about 12 at.% for all starting compositions. In contrast, the content of the alloying elements in the tetragonal phase is considerably lower (around 4 at.%) and increases slightly as the Me content in the starting mixture is increased.

Sign in / Sign up

Export Citation Format

Share Document