Ovivo to provide water treatment equipment for North Sea oil platform

2015 ◽  
Vol 52 (5) ◽  
pp. 4
1991 ◽  
Vol 24 (10) ◽  
pp. 161-170 ◽  
Author(s):  
M. D. Sinke

Until a century ago, The Hague's waste water was discharged directly into the city's canals. However, the obnoxious smell and resultant pollution of local waters and beaches then necessitated the implementation of a policy of collecting and transferring waste water by means of a system of sewers. By 1937, it was being discharged, via a 400 metre-long sea outfall, directly into the North Sea. By 1967, however, the increasing volume of waste water being generated by The Hague and the surrounding conurbations called for the construction of a primary sedimentation plant. This had two sea outfalls, one 2.5 km long and the other 10 km long, the former for discharging pre-settled waste water and the latter for discharging sludge directly into the North Sea. This “separation plant” was enlarged during the period 1986-1990. On account of the little available area - only 4.1 ha - the plant had to be enlarged in two stages by constructing a biological treatment section and a sludge treatment section with a capacity of 1,700,000 p.e. (at 136 gr O2/p.e./day). In order to gain additional space, a number of special measures were introduced, including aerating gas containing 90% oxygen and stacked final clarifiers. Following completion of the sludge treatment section, it has become possible, since 1st May 1990, to dump digested sludge into a large reservoir (“The Slufter”), specially constructed to accommodate polluted mud dredged from the Rotterdam harbours and waterways. As a result of these measures, there has been a reduction of between 70% and 95% in North Sea pollution arising from the “Houtrust” waste water treatment plant. Related investment totalled Dfl. 200 million and annual operating and maintenance costs (including investment charges) will amount to Dfl. 30 million. Further measures will have to be taken in the future to reduce the discharge of phosphorus and nitrogen. So this enlargement is not the end. There will be continued extension of the purification operations of the “Houtrust” waste water treatment plant.


Author(s):  
Robin Fearnley

Ratification of the International Maritime Organization (IMO) International Convention for the Control and Management of Ships' Ballast Water and Sediments (BWMC)[i] has now forced the hand of operators and ship owners to comply with the BWM, and without a great deal of time to react. The need to integrate and operate Ballast Water Treatment (BWT) Systems on In-Service ships, however, is not new, and BMT have recent and relevant experience in end-to-end BWT system solutions. In 2011 BMT Defence Services Ltd (BMT) produced the installation specification to enable A and P Falmouth Ltd (A and P) to carry out a ballast water treatment plant retrofit installation on the RFA Bay Class ships (i.e. RFA MOUNTS BAY, LARGS BAY and CARDIGAN BAY), enabling the ship to be approved and operated in compliance with the BWMC. In addition, BMT produced documentation to enable A and P to arrange, manage and perform the necessary test, trials and commissioning to prove the equipment installation and that it can be operated in accordance with the requirements of the BWMC. The objective of this paper is to take the reader through the process of design and embodiment of a BWT system retrofit on a relatively complex (with respect to the ballast system) ship. The Bay Class ships are Landing Ship Dock (Auxiliary) ships with separate forward and aft ballast systems (to allow the ships to function in their amphibious roles by way of their stern dock), and a ship wide Ballast Stripping system. Key design and engineering considerations are discussed below and recommendations for the installation of a ballast water treatment system are also offered. International Convention for the Control and Management of Ships' Ballast Water and Sediments, International Maritime Organization, Adoption: 13 February 2004; Entry into force: 8 September 2017.


Author(s):  
R. Kristoforus Jawa Bendi ◽  
Fransiska Soejono ◽  
Ian Kurniawan ◽  
Theresia Sunarni ◽  
Yohanes Dicka Pratama

Clean water is one of the problems faced by the Santa Maria Orphanage. To solve this problem, a Community Service Team of the Musi Charitas Catholic University initiated to make a clean water treatment equipment and provide a training for using and maintaining it, and introduced the importance using of clean water for health. The equipment was made by adopting a hybrid membrane technology. It was gived to the manager of the Orphanage and given training to use and maintain it. While the activity evaluation of introducing the importance of clean water for health showed knowledge increasing of participants about 30%.   Salah satu permasalahan yang ditemui di Panti Asuhan Santa Maria adalah ketersediaan air bersih. Hasil analisis laboratorium menunjukkan bahwa air yang digunakan oleh penghuni Panti Asuhan selama ini tidak memenuhi persyaratan air bersih. Untuk mengatasi permasalahan tersebut, Tim Pengabdian kepada Masyarakat Universitas Katolik Musi Charitas berinisiatif membuat alat pengolahan air bersih sekaligus meberikan pelatihan penggunaan dan perawatan alat tersebut, serta memberikan sosialisasi tentang pentingnya menggunakan air bersih bagi kesehatan. Alat pengolahan air bersih tersebut dibuat dengan mengadopsi teknologi membran hibrid. Pada saat pelaksanaan kegiatan, alat tersebut diserahkan kepada pengelola Panti Asuhan dan diberikan pelatihan untuk menggunakan dan merawat alat tersebut. Hasil evaluasi sosialisasi tentang pentingnya air bersih menunjukkan adanya peningkatan pengetahuan peserta sosialisasi sebesar 30%.


Sign in / Sign up

Export Citation Format

Share Document