scholarly journals SP-0204: Decision support systems and shared decision making

2017 ◽  
Vol 123 ◽  
pp. S103
Author(s):  
M.A. Gambacorta ◽  
G. Chiloiro ◽  
C. Masciocchi ◽  
N. Dinapoli ◽  
F. Cellini ◽  
...  
Author(s):  
Soraya Rahma Hayati ◽  
Mesran Mesran ◽  
Taronisokhi Zebua ◽  
Heri Nurdiyanto ◽  
Khasanah Khasanah

The reception of journalists at the Waspada Daily Medan always went through several rigorous selections before being determined to be accepted as journalists at the Waspada Medan Daily. There are several criteria that must be possessed by each participant as a condition for becoming a journalist in the Daily Alert Medan. To get the best participants, the Waspada Medan Daily needed a decision support system. Decision Support Systems (SPK) are part of computer-based information systems (including knowledge-based systems (knowledge management)) that are used to support decision making within an organization or company. Decision support systems provide a semitructured decision, where no one knows exactly how the decision should be made. In this study the authors applied the VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) as the method to be applied in the decision support system application. The VIKOR method is part of the Multi-Attibut Decision Making (MADM) Concept, which requires normalization in its calculations. The expected results in this study can obtain maximum decisions.Keywords: Journalist Acceptance, Decision Support System, VIKOR


2018 ◽  
Vol 1 (2) ◽  
pp. 45-54
Author(s):  
Helpi Nopriandi

Tenaga Kependidikan merupakan anggota masyarakat yang mengabdikan diri dan diangkat untuk menunjang penyelenggaraan pendidikan. Decision Support Systems atau lebih dikenal dengan Sistem Pendukung Keputusan adalah bagian dari sebuah sistem informasi yang berbasis komputer termasuk sistem yang berbasis ilmu pengetahuan dan dipakai untuk mendukung pengambil  keputusan dalam suatu organisasi atau perusahaan. untuk memudahkan pimpinan dalam mengambil sebuah keputusan dibuatlah suatu sistem pengambil keputusan dengan menggunakan Fuzzy Multiple Attribute Decision Making  (FMADM) digunakan untuk mencari alternatif optimalkan dari sejumlah alternatif dengan kriteria tertentu, sedangkan metode Simple Additive Weighting (SAW). Metode SAW sering juga dikenal istilah metode penjumlahan terbobot. Konsep dasar metode SAW adalah mencari penjumlahan terbobot dari rating kinerja pada setiap alternatif dari semua atribut.


Author(s):  
Geert van der Sluis ◽  
Jelmer Jager ◽  
Ilona Punt ◽  
Alexandra Goldbohm ◽  
Marjan J. Meinders ◽  
...  

Background. To gain insight into the current state-of-the-art of shared decision making (SDM) during decisions related to pre and postoperative care process regarding primary total knee replacement (TKR). Methods. A scoping review was performed to synthesize existing scientific research regarding (1) decisional needs and preferences of patients preparing for, undergoing and recovering from TKR surgery, (2) the relation between TKR decision-support interventions and SDM elements (i.e., team talk, option talk, and decision talk), (3) the extent to which TKR decision-support interventions address patients’ decisional needs and preferences. Results. 2526 articles were identified, of which 17 articles met the inclusion criteria. Of the 17 articles, ten had a qualitative study design and seven had a quantitative study design. All included articles focused on the decision whether to undergo TKR surgery or not. Ten articles (all qualitative) examined patients’ decisional needs and preferences. From these, we identified four domains that affected the patients’ decision to undergo TKR: (1) personal factors, (2) external factors, (3) information sources and (4) preferences towards outcome prediction. Seven studies (5) randomized controlled trials and 2 cohort studies) used quantitative analyses to probe the effect of decision aids on SDM and/or clinical outcomes. In general, existing decision aids did not appear to be tailored to patient needs and preferences, nor were the principles of SDM well-articulated in the design of decision aids. Conclusions. SDM in TKR care is understudied; existing research appears to be narrow in scope with limited relevance to established SDM principles and the decisional needs of patients undertaking TKR surgery.


Author(s):  
Dawn M. Magnusson ◽  
Irena Shwayder ◽  
Natalie J. Murphy ◽  
Lindsay Ollerenshaw ◽  
Michele Ebendick ◽  
...  

Purpose Despite increasing standardization of developmental screening and referral processes, significant early intervention service disparities exist. The aims of this article are to: (a) describe methods used to develop a decision support tool for caregivers of children with developmental concerns, (b) summarize key aspects of the tool, and (c) share preliminary results regarding the tool's acceptability and usability among key stakeholders. Method Content and design of the decision support tool was guided by a systematic process outlined by the International Patient Decision Aid Standards (IPDAS) Collaborative. Three focus group interviews were conducted with caregivers ( n = 7), early childhood professionals ( n = 28), and a mix of caregivers and professionals ( N = 20) to assess caregiver decisional needs. In accordance with the IPDAS, a prototype of the decision support tool was iteratively cocreated by a subset of caregivers ( n = 7) and early child health professionals ( n = 5). Results The decision support tool leverages images and plain language text to guide caregivers and professionals along key steps of the early identification to service use pathway. Participants identified four themes central to shared decision making: trust, cultural humility and respect, strength-based conversations, and information-sharing. End-users found the tool to be acceptable and useful. Conclusions The decision support tool described offers an individualized approach for exploring beliefs about child development and developmental delay, considering service options within the context of the family's values, priorities, and preferences, and outlining next steps. Additional research regarding the tool's effectiveness in optimizing shared decision-making and reducing service use disparities is warranted.


2016 ◽  
Vol 12 (1) ◽  
pp. 201
Author(s):  
Bilal Mohammed Salem Al-Momani

Decision support systems (DSS) are interactive computer-based systems that provide information, modeling, and manipulation of data. DSS are clearly knowledge-based information systems to capture, Processing and analysis of information affecting or aims to influence the decision making process, performed by people in scope professional job appointed by a user. Hence, this study describes briefly the key concepts of decision support systems such as perceived factors with a focus on quality  of information systems and quality of information variables, behavioral intention of using DSS, and actual DSS use by adopting and extending the technology acceptance model (TAM) of Davis (1989); and Davis, Bagozzi and Warshaw (1989).There are two main goals, which stimulate the study. The first goal is to combine Perceived DSS factors and behavioral intention to use DSS from both the social perspective and a technology perspective with regard to actual DSS usage, and an experimental test of relations provide strategic locations to organizations and providing indicators that should help them manage their DSS effectiveness. Managers face the dilemma in choosing and focusing on most important factors which contributing to the positive behavioral intention of use DSS by the decision makers, which, in turn, could contribute positively in the actual DSS usage by them and other users to effectively solve organizational problems. Hence, this study presents a model which should provide the useful tool for top management in the higher education institutions- in particular-to understand the factors that determine using behaviors for designing proactive interventions and to motivate the acceptance of TAM in order to use the DSS in a way that contributes to the higher education decision-making plan and IT policy.To accomplish or attain the above mentioned objectives, the researcher developed a research instrument (questionnaire) and distributed it amongst the higher education institutions in Jordan to collect data in order to empirically study hypothesis testing (related to the objectives of study). 341 questionnaires were returned from the study respondents. Data were analyzed by utilizing both SPSS (conducted descriptive analysis) and AMOS (conducting structural equation modelling).Findings of the study indicate that some hypotheses were supported while the others were not. Contributions of the study were presented. In addition, the researcher presented some recommendations. Finally, this study has identified opportunities for further study which has progressed greatly advanced understanding constantly of DSS usage, that can help formulate powerful strategies Involving differentiation between DSS perceived factors.


Author(s):  
Jitka Janová ◽  
M. Lindnerová

The decision support systems commonly used in industry and economy managerial practice for optimizing the processes are based on algoritmization of the typical decision problems. In Czech forestry business, there is a lack of developed decision support systems, which could be easily used in daily practice. This stems from the fact, that the application of optimization methods is less successful in forestry decision making than in industry or economy due to inherent complexity of the forestry decision problems. There is worldwide ongoing research on optimization models applicable in forestry decision making, but the results are not globally applicable and moreover the cost of possibly arising software tools are indispensable. Especially small and medium forestry companies in Czech Republic can not afford such additional costs, although the results of optimization could positively in­fluen­ce not only the business itself but also the impact of forestry business on the environment. Hence there is a need for user friendly optimization models for forestry decision making in the area of Czech Republic, which could be easily solved in commonly available software, and whose results would be both, realistic and easily applicable in the daily decision making.The aim of this paper is to develop the optimization model for the machinery use planning in Czech logging firm in such a way, that the results can be obtained using MS EXCEL. The goal is to identify the integer number of particular machines which should be outsourced for the next period, when the total cost minimization is required. The linear programming model is designed covering the typical restrictions on available machinery and total volume of trees to be cut and transported. The model offers additional result in the form of optimal employment of particular machines. The solution procedure is described in detail and the results obtained are discussed with respect to its applicability in practical forestry decision making. The possibility of extension of suggested model by including additional requirements is mentioned and the example for the wood manipulation requirement is shown.


Sign in / Sign up

Export Citation Format

Share Document