The effect of basicity of poly-aluminum macromolecule solution on the properties of γ-Al2O3 ceramic membrane

1999 ◽  
Vol 155 (2) ◽  
pp. 185-191
Author(s):  
He Weiguang ◽  
Lin Shaokun ◽  
Zheng Kangcheng ◽  
Li Xiaogang ◽  
Lin Senshu
Membranes ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 21
Author(s):  
Shengyin Tang ◽  
Wanyi Fu ◽  
Tiantian Song ◽  
Tianhao Tang ◽  
Li Chen ◽  
...  

This work presents an effective approach for manganese-doped Al2O3 ceramic membrane (Mn-doped membrane) fouling control by in-situ confined H2O2 cleaning in wastewater treatment. An Mn-doped membrane with 0.7 atomic percent Mn doping in the membrane layer was used in a membrane bioreactor with the aim to improve the catalytic activity toward oxidation of foulants by H2O2. Backwashing with 1 mM H2O2 solution at a flux of 120 L/m2/h (LMH) for 1 min was determined to be the optimal mode for in-situ H2O2 cleaning, with confined H2O2 decomposition inside the membrane. The Mn-doped membrane with in-situ H2O2 cleaning demonstrated much better fouling mitigation efficiency than a pristine Al2O3 ceramic membrane (pristine membrane). With in-situ H2O2 cleaning, the transmembrane pressure increase (ΔTMP) of the Mn-doped membrane was 22.2 kPa after 24-h filtration, which was 40.5% lower than that of the pristine membrane (37.3 kPa). The enhanced fouling mitigation was attributed to Mn doping, in the Mn-doped membrane layer, that improved the membrane surface properties and confined the catalytic oxidation of foulants by H2O2 inside the membrane. Mn3+/Mn4+ redox couples in the Mn-doped membrane catalyzed H2O2 decomposition continuously to generate reactive oxygen species (ROS) (i.e., HO• and O21), which were likely to be confined in membrane pores and efficiently degraded organic foulants.


Author(s):  
Xiao Guo ◽  
Haibo Wang ◽  
Rui Tian ◽  
Haojiang Yin ◽  
Yunfeng Qiu ◽  
...  

Author(s):  
C.E. Voegele-Kliewer ◽  
A.D. McMaster ◽  
G.W. Dirks

Materials other than polymers, e.g. ceramic silicates, are currently being investigated for gas separation processes. The permeation characteristics of one such material, Vycor (Corning Glass #1370), have been reported for the separation of hydrogen from hydrogen iodide. This paper will describe the electron microscopy techniques applied to reveal the porous microstructure of a Vycor membrane. The application of these techniques has led to an increased understanding in the relationship between the substructure and the gas transport properties of this material.


2015 ◽  
Vol 14 (9) ◽  
pp. 2139-2148 ◽  
Author(s):  
Sourja Ghosh ◽  
Priyankari Bhattacharya ◽  
Swachchha Majumdar ◽  
Somendra Nath Roy ◽  
Sibdas Bandyopadhyay

2009 ◽  
Vol 25 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Lei BI ◽  
Ze-Tian TAO ◽  
Ran-Ran PENG ◽  
Wei LIU

2017 ◽  
Vol 68 (6) ◽  
pp. 1302-1305
Author(s):  
Ali A. A. Al Janabi ◽  
Oana Cristina Parvulescu ◽  
Bogdan Trica ◽  
Tanase Dobre

The paper aimed at studying the performances of pervaporation separation of isopropanol-water system using a Pervatech ceramic membrane at various values of feed mixture flow rate (F=1000 kg/hr), feed water mass fraction (xF=0.1-0.2), operation temperature (t=60-90 �C), permeate pressure (pP=1000-9000 Pa) and water separation degree (sW=0.9, 0.95). Membrane total flux and separation factor were predicted applying a second order response surface model with 3 factors, i.e., xF, t and pP. An algorithm for estimating the membrane surface area was presented. Membrane area increased with sW and xF and its lowest values (A=13 m2 for xF=0.1 and A=24 m2 for xF=0.2) were attained for t=60 �C and pP=9000 Pa. These findings could be applied for optimizing the process of isopropanol dehydration by pervaporation.


Sign in / Sign up

Export Citation Format

Share Document