A SEM/TEM examination of a ceramic membrane

1986 ◽  
Vol 44 ◽  
pp. 682-683
Author(s):  
C.E. Voegele-Kliewer ◽  
A.D. McMaster ◽  
G.W. Dirks
Keyword(s):  
Electron Microscopy ◽  
Gas Separation ◽  
Ceramic Membrane ◽  
Hydrogen Iodide ◽  
Separation Processes ◽  
Corning Glass ◽  
Gas Transport Properties ◽  
Porous Microstructure ◽  
Microscopy Techniques ◽  
The Relationship

Materials other than polymers, e.g. ceramic silicates, are currently being investigated for gas separation processes. The permeation characteristics of one such material, Vycor (Corning Glass #1370), have been reported for the separation of hydrogen from hydrogen iodide. This paper will describe the electron microscopy techniques applied to reveal the porous microstructure of a Vycor membrane. The application of these techniques has led to an increased understanding in the relationship between the substructure and the gas transport properties of this material.

Stress Relaxation Behavior of GH4169 Alloy

2020 ◽  
Vol 1013 ◽  
pp. 52-58
Author(s):  
Xu Dong Lu ◽  
Song Yi Shi ◽  
Bo Wen ◽  
Ya Wei Zhang ◽  
Jin Hui Du
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Stress Relaxation ◽  
Initial Stress ◽  
Relaxation Behavior ◽  
Stress Relaxation Behavior ◽  
Transmission Electron ◽  
Microscopy Techniques ◽  
The Relationship ◽  
Gh4169 Alloy

The relaxation properties of GH4169 alloy were studied contrastively at temperatures ranging from 600 oC to 700 °C and initial stress ranging from 550 MPa to 850 MPa. The relationship between the microstructure and relaxation behavior was evaluated using transmission electron microscopy techniques. It was found that the relaxation limit and relaxation stability of the alloy decreased obviously with the increase of temperature. Further investigations show that the relaxation behavior is mainly depend on both precipitate characteristics and its interaction with dislocations. The alloy with higher strength lever has more excellent stress relaxation stability, because of the inhibition of a large number subgrains on dislocations motion.

Crystalline and microstructure study of the AlN–Al2O3section in the Al–N–O system. II. φ′- and δ-AlON spinel phases

1999 ◽  
Vol 32 (2) ◽  
pp. 253-272 ◽  
Author(s):  
P. Tabary ◽  
C. Servant
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Structural Model ◽  
Spinel Phase ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Spinel Phases ◽  
Two Phases ◽  
Microscopy Techniques ◽  
The Relationship

Results from the crystalline and microstructure study of the φ′- and δ-AlON spinel phases by X-ray diffraction, neutron diffraction and standard-resolution transmission electron microscopy techniques are reported. Several samples having different compositions in mol % AlN were considered. A structural model is proposed to account for the double modulation of composition and displacement of the cations and anions, which has been determined for these two phases and for the relationship with the γ-AlON spinel phase. Some high-resolution transmission electron microscopy experiments have confirmed the present structural model. A discussion with reference to previous data is presented.

A SEM/TEM Investigation of a Polymer Membrane

1985 ◽  
Vol 43 ◽  
pp. 86-87
Author(s):  
C. E. Voegele-Kliewer
Keyword(s):  
Electron Microscopy ◽  
Membrane Separation ◽  
Polymer Membrane ◽  
Polymeric Membranes ◽  
Separation Processes ◽  
Freeze Fracturing ◽  
Basic Understanding ◽  
Microscopy Techniques ◽  
Beam Damage

INTRODUCTION. Polymeric membranes are being developed for a number of technologically important separation processes. Thus a basic understanding of their microstructure has become vital not only in the development of membranes more suitable to current requirements but also in the formation of polymers for future applications. This investigation describes the electron microscopy techniques used to characterize microstructural features which correlate with membrane separation processes.EXPERIMENTAL. An experimental membrane was examined using both a CAMSCAN SERIES IV SEM and a JEOL 1200EX STEM. The material was prepared for SEM examination using conventional freeze fracturing techniques. A low accelerating voltage, 20kV, was used to reduce the possibility of beam damage in the SEM. The membrane was prepared for examination in the TEM by using a technique described by L. Sawyer.

Studies on Leukemogenic and Sarcomagenic Viruses

1970 ◽  
Vol 28 ◽  
pp. 156-157
Author(s):  
Leon Dmochowski
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Morphological Properties ◽  
Mode Of Development ◽  
Relationship Of ◽  
The Relationship

Electron microscopy has proved to be an invaluable discipline in studies on the relationship of viruses to the origin of leukemia, sarcoma, and other types of tumors in animals and man. The successful cell-free transmission of leukemia and sarcoma in mice, rats, hamsters, and cats, interpreted as due to a virus or viruses, was proved to be due to a virus on the basis of electron microscope studies. These studies demonstrated that all the types of neoplasia in animals of the species examined are produced by a virus of certain characteristic morphological properties similar, if not identical, in the mode of development in all types of neoplasia in animals, as shown in Fig. 1.

Profile Imaging of Silicon Surface Reconstructions

1985 ◽  
Vol 43 ◽  
pp. 262-263
Author(s):  
O.L. Krivanek ◽  
G.J. Wood
Keyword(s):  
Electron Microscopy ◽  
Surface Structure ◽  
Structure Determination ◽  
Silicon Surface ◽  
Good Resolution ◽  
Surface Reconstructions ◽  
Bulk Structure ◽  
Point To Point ◽  
The Relationship

Electron microscopy at 0.2nm point-to-point resolution, 10-10 torr specimei region vacuum and facilities for in-situ specimen cleaning presents intere; ing possibilities for surface structure determination. Three methods for examining the surfaces are available: reflection (REM), transmission (TEM) and profile imaging. Profile imaging is particularly useful because it giv good resolution perpendicular as well as parallel to the surface, and can therefore be used to determine the relationship between the surface and the bulk structure.

scholarly journals Microscopy Methods for Biofilm Imaging: Focus on SEM and VP-SEM Pros and Cons

Biology ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 51
Author(s):  
Michela Relucenti ◽  
Giuseppe Familiari ◽  
Orlando Donfrancesco ◽  
Maurizio Taurino ◽  
Xiaobo Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Ion Beam ◽  
Ruthenium Red ◽  
Variable Pressure ◽  
Sem Images ◽  
Advantages And Disadvantages ◽  
Pros And Cons ◽  
Microscopy Techniques ◽  
Scanning Electron

Several imaging methodologies have been used in biofilm studies, contributing to deepening the knowledge on their structure. This review illustrates the most widely used microscopy techniques in biofilm investigations, focusing on traditional and innovative scanning electron microscopy techniques such as scanning electron microscopy (SEM), variable pressure SEM (VP-SEM), environmental SEM (ESEM), and the more recent ambiental SEM (ASEM), ending with the cutting edge Cryo-SEM and focused ion beam SEM (FIB SEM), highlighting the pros and cons of several methods with particular emphasis on conventional SEM and VP-SEM. As each technique has its own advantages and disadvantages, the choice of the most appropriate method must be done carefully, based on the specific aim of the study. The evaluation of the drug effects on biofilm requires imaging methods that show the most detailed ultrastructural features of the biofilm. In this kind of research, the use of scanning electron microscopy with customized protocols such as osmium tetroxide (OsO4), ruthenium red (RR), tannic acid (TA) staining, and ionic liquid (IL) treatment is unrivalled for its image quality, magnification, resolution, minimal sample loss, and actual sample structure preservation. The combined use of innovative SEM protocols and 3-D image analysis software will allow for quantitative data from SEM images to be extracted; in this way, data from images of samples that have undergone different antibiofilm treatments can be compared.

scholarly journals A Molecular Simulation Study of Silica/Polysulfone Mixed Matrix Membrane for Mixed Gas Separation

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2199
Author(s):  
Khadija Asif ◽  
Serene Sow Mun Lock ◽  
Syed Ali Ammar Taqvi ◽  
Norwahyu Jusoh ◽  
Chung Loong Yiin ◽  
...  
Keyword(s):  
Transport Properties ◽  
Molecular Simulation ◽  
Gas Separation ◽  
Membrane Separation ◽  
Gas Transport ◽  
Mixed Matrix ◽  
Mixed Gas ◽  
Gas Transport Properties ◽  
Simulation Results ◽  
Mixed Gases

Polysulfone-based mixed matrix membranes (MMMs) incorporated with silica nanoparticles are a new generation material under ongoing research and development for gas separation. However, the attributes of a better-performing MMM cannot be precisely studied under experimental conditions. Thus, it requires an atomistic scale study to elucidate the separation performance of silica/polysulfone MMMs. As most of the research work and empirical models for gas transport properties have been limited to pure gas, a computational framework for molecular simulation is required to study the mixed gas transport properties in silica/polysulfone MMMs to reflect real membrane separation. In this work, Monte Carlo (MC) and molecular dynamics (MD) simulations were employed to study the solubility and diffusivity of CO2/CH4 with varying gas concentrations (i.e., 30% CO2/CH4, 50% CO2/CH4, and 70% CO2/CH4) and silica content (i.e., 15–30 wt.%). The accuracy of the simulated structures was validated with published literature, followed by the study of the gas transport properties at 308.15 K and 1 atm. Simulation results concluded an increase in the free volume with an increasing weight percentage of silica. It was also found that pure gas consistently exhibited higher gas transport properties when compared to mixed gas conditions. The results also showed a competitive gas transport performance for mixed gases, which is more apparent when CO2 increases. In this context, an increment in the permeation was observed for mixed gas with increasing gas concentrations (i.e., 70% CO2/CH4 > 50% CO2/CH4 > 30% CO2/CH4). The diffusivity, solubility, and permeability of the mixed gases were consistently increasing until 25 wt.%, followed by a decrease for 30 wt.% of silica. An empirical model based on a parallel resistance approach was developed by incorporating mathematical formulations for solubility and permeability. The model results were compared with simulation results to quantify the effect of mixed gas transport, which showed an 18% and 15% percentage error for the permeability and solubility, respectively, in comparison to the simulation data. This study provides a basis for future understanding of MMMs using molecular simulations and modeling techniques for mixed gas conditions that demonstrate real membrane separation.

scholarly journals Raman Sensor for the Determination of Gas Solubility

Physchem ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 176-188
Author(s):  
Gregor Lipinski ◽  
Markus Richter
Keyword(s):  
Carbon Dioxide ◽  
Gas Separation ◽  
Accurate Determination ◽  
Measurement Techniques ◽  
Screening Tools ◽  
Measuring System ◽  
Separation Processes ◽  
Use Of Resources ◽  
Gas Solubilities

Efficient and environmentally responsible use of resources requires the development and optimization of gas separation processes. A promising approach is the use of liquids that are designed for specific tasks, e.g., the capture of carbon dioxide or other greenhouse gases. This requires an accurate determination of gas solubilities for a broad range of temperatures and pressures. However, state of the art measurement techniques are often very time consuming or exhibit other pitfalls that prevent their use as efficient screening tools. Here, we show that the application of Raman spectroscopy through a compact measuring system can simplify data acquisition for the determination of gas solubilities in liquids. To demonstrate that this approach is expedient, we determined gas solubilities of carbon dioxide in water for three isotherms T = (288.15, 293.15, 298.15) K over a pressure range from p = (0.5–5) MPa and in three imidazolium-based ionic liquids for one isotherm T = 298.15 K at pressures from p = (0.1–5) MPa. When compared to data in the literature, all results are within the reported uncertainties of the measurement techniques involved. The developed analysis method eliminates the need for a lengthy volume or mass calibration of the sample prior to the measurements and, therefore, allows for fast screening of samples, which can help to advance gas separation processes in scientific and industrial applications.

scholarly journals Unraveling the fine-tuned lemon coloration of a pierid butterfly Catopsilia pomona

Microscopy ◽  
2017 ◽  
Vol 66 (6) ◽  
pp. 414-423
Author(s):  
Monalisa Mishra ◽  
Ashutosh Choudhury ◽  
P Sagar Achary ◽  
Harekrushna Sahoo
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Variable Temperature ◽  
Wing Pattern ◽  
Physical Composition ◽  
Different Types ◽  
Microscopy Techniques ◽  
Pierid Butterfly ◽  
Best Fit ◽  
Scanning Electron

Abstract Butterflies wings possess different types of scales to perform diverse functions. Each scale has many nano and microstructures, which interferes with light, resulting in unique coloration for each butterfly. Besides coloration, the arrangement of scales further helps in giving better survivability. Thus, analysis of wing pattern provides an overall idea about adaptation and activity of the animal. The current study deciphers the structure and composition of a wing of a pierid butterfly Catopsilia pomona, which remains active at 42°C at which temperature all other butterflies face a tougher task for existence. In order to know the relation between survivability and adaptation in the wing, we have investigated the structural and physical composition of the wing of C. pomona under optical spectroscopy (absorption, reflectance and transmittance) along with microscopy techniques (optical and scanning electron microscopy), which are not described in earlier studies. The current findings reveal unique structural arrangement within scales to provide the best fit to the animal in variable temperature.

Mass Transfer in Tubular Ceramic Membranes for Polluted Water Treatment - Numerical Simulation

2018 ◽  
Vol 20 ◽  
pp. 16-33 ◽  
Author(s):  
J. Saraiva de Souza ◽  
S. José dos Santos Filho ◽  
Severino Rodrigues de Farias Neto ◽  
A.G. Barbosa de Lima ◽  
H.A. Luma Fernandes Magalhães
Keyword(s):  
Mass Transfer ◽  
Water Treatment ◽  
Produced Water ◽  
Ceramic Membrane ◽  
Porous Ceramic ◽  
Ceramic Membranes ◽  
Numerical Results ◽  
Polluted Water ◽  
Separation Processes ◽  
Water Separation

Innovative technologies are needed to attend the increasingly strict requirements for produced water treatment, since most of the separation processes are limited to particles larger than 10 μm. Separation processes using ceramic membranes are attracting great interest from academic and industrial community. Nevertheless, few studies, especially numerical, regarding the inorganic membrane’s application for the polluted water separation have been reported. In the present work, therefore, a study of fluid-flow dynamics for a laminar regime in porous tubes (tubular porous ceramic membrane) has been performed. The mass, momentum and mass transport conservation equations were solved with the aid of a structured mesh using ANSYS CFX commercial package. The velocity of local permeation was determined using the resistance in series model. The specific resistance of the polarized layer was obtained by Carman-Kozeny equation. The numerical results were evaluated and compared with the results available in the literature, where by a good agreement with each other was found. The numerical results, obtained by the proposed shell and tubular membrane separation module, indicate that there is facilitation of mass transfer and hence a reduction in the thickness of the polarized boundary layer occurs.

Sign in / Sign up

Export Citation Format

Share Document