Comprehensive comparison of efficiency and CO2 emissions between biomass energy conversion technologies—position of supercritical water gasification in biomass technologies

2003 ◽  
Vol 25 (3) ◽  
pp. 257-272 ◽  
Author(s):  
Yoshikuni Yoshida ◽  
Kiyoshi Dowaki ◽  
Yukihiko Matsumura ◽  
Ryuji Matsuhashi ◽  
Dayin Li ◽  
...  
Author(s):  
Niloufar Ghavami ◽  
Karhan Özdenkçi ◽  
Gabriel Salierno ◽  
Margareta Björklund-Sänkiaho ◽  
Cataldo De Blasio

AbstractBiomass is often referred to as a carbon–neutral energy source, and it has a role in reducing fossil fuel depletion. In addition, biomass can be converted efficiently into various forms of biofuels. The biomass conversion processes involve several thermochemical, biochemical, and hydrothermal methods for biomass treatment integration. The most common conversion routes to produce biofuels include pyrolysis and gasification processes. On the other hand, supercritical water gasification (SCWG) and hydrothermal liquefaction (HTL) are best suitable for converting biomass and waste with high moisture content. Despite promising efficiencies, SCWG and HTL processes introduce operational issues as obstacles to the industrialization of these technologies. The issues include process safety aspects due to operation conditions, plugging due to solid deposition, corrosion, pumpability of feedstock, catalyst sintering and deactivation, and high production costs. The methods to address these issues include various reactor configurations to avoid plugging and optimizing process conditions to minimize other issues. However, there are only a few studies investigating the operational issues as the main scope, and reviews are seldomly available in this regard. Therefore, further research is required to address operational problems. This study reviews the main operational problems in SCWG and HTL. The objective of this study is to enhance the industrialization of these processes by investigating the operational issues and the potential solutions, i.e., contributing to the elimination of the obstacles. A comprehensive study on the operational issues provides a holistic overview of the biomass conversion technologies and biorefinery concepts to promote the industrialization of SCWG and HTL.


2019 ◽  
Vol 44 (10) ◽  
pp. 4664-4673 ◽  
Author(s):  
Mi Yan ◽  
Hongcai Su ◽  
Dwi Hantoko ◽  
Ekkachai Kanchanatip ◽  
Fauziah Binti Shahul Hamid ◽  
...  

2020 ◽  
Vol 45 (29) ◽  
pp. 14744-14755 ◽  
Author(s):  
Wei Su ◽  
Changqing Cai ◽  
Ping Liu ◽  
Wei Lin ◽  
Baorui Liang ◽  
...  

2020 ◽  
Vol 9 (1) ◽  
pp. 22
Author(s):  
Sathiabama T. T. Thirugnana ◽  
Abu Bakar Jaafar ◽  
Takeshi Yasunaga ◽  
Tsutomu Nakaoka ◽  
Yasuyuki Ikegami ◽  
...  

The Malaysian Government has set a target of achieving 20% penetration of Renewable Energy (RE) in the energy mix spectrum by 2025. In order to get closer to the target, Ocean Thermal Energy Conversion (OTEC) aligned with solar PV, biogas and biomass energy sources must be evaluated and comprehended. Hybrid OTEC systems consisting of energy and water production are currently under research and validation. Therefore, for the construction of a commercial OTEC plant, 1 MW or 2.5 MW, the choice of a strategic location or potential site is vital. In this paper, oceanographic data such as seawater temperature, depth, salinity and dissolved oxygen obtained from the Japan Oceanographic Data Center (JODC) for Semporna, Tawau, Kudat, Pulau Layang-Layang and Pulau Kalumpang in Sabah, Malaysia, are reported. The RE available from the Exclusive Economic Zone (EEZ) on the coast of Sabah was estimated based on the JODC data obtained. There were no remarkable differences in temperatures between the five sites, which were reported as approximately 27 °C at the surface and 7 °C at depths below 600 m. The surface salinities below 100 m at those sites were slightly lower than the deeper waters, where the salinity increased up to approximately 34.5 PSU. Dissolved oxygen data from the Pulau Kalumpang site showed a slight increment to approximately 4.7 mL/L at depth intervals below 50 m, before declining steadily to approximately 1.7 mL/L along with the depth. The temperature-salinity profiles of the Malaysian sites were congruent with those of Palau, Kumejima and Okinawa, but not with that of Fiji, where the salinity profile showed a distinct variation at the relative depth (below 200 m). Estimates of RE using two different methods were used to prove the potential of OTEC in Malaysia.


Processes ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 455
Author(s):  
Nikolaos Boukis ◽  
I. Katharina Stoll

Gasification of organic matter under the conditions of supercritical water (T > 374 °C, p > 221 bar) is an allothermal, continuous flow process suitable to convert materials with high moisture content (<20 wt.% dry matter) into a combustible gas. The gasification of organic matter with water as a solvent offers several benefits, particularly the omission of an energy-intensive drying process. The reactions are fast, and mean residence times inside the reactor are consequently low (less than 5 min). However, there are still various challenges to be met. The combination of high temperature and pressure and the low concentration of organic matter require a robust process design. Additionally, the low value of the feed and the product predestinate the process for decentralized applications, which is a challenge for the economics of an application. The present contribution summarizes the experience gained during more than 10 years of operation of the first dedicated pilot plant for supercritical water gasification of biomass. The emphasis lies on highlighting the challenges in process design. In addition to some fundamental results gained from comparable laboratory plants, selected experimental results of the pilot plant “VERENA” (acronym for the German expression “experimental facility for the energetic exploitation of agricultural matter”) are presented.


Sign in / Sign up

Export Citation Format

Share Document