High-Temperature Oxidation Behavior of (Ti,Cr)N Coating Deposited on 4Cr13 Stainless Steel by Multi-arc Ion Plating

2014 ◽  
Vol 43 (5) ◽  
pp. 1084-1087 ◽  
Author(s):  
Cai Hangwei ◽  
Gao Yuan ◽  
Yuan Lin ◽  
Ma Zhikang ◽  
Wang Chenglei
Keyword(s):  
Stainless Steel ◽  
High Temperature ◽  
High Temperature Oxidation ◽  
Oxidation Behavior ◽  
Temperature Oxidation ◽  
Arc Ion Plating ◽  
Ion Plating ◽  
High Temperature Oxidation Behavior

Structure and Oxidation Behavior of Gradient Zr/ZrN/Zr Diffusion Barrier on the Ni-Based Superalloy by Arc Ion Plating

2010 ◽  
Vol 97-101 ◽  
pp. 1479-1483
Author(s):  
Yan Cai ◽  
Chun Hu Tao ◽  
Feng Lu ◽  
Jian Ping Li
Keyword(s):  
High Temperature ◽  
Diffusion Barrier ◽  
High Temperature Oxidation ◽  
Oxidation Behavior ◽  
Middle Layer ◽  
Temperature Oxidation ◽  
Arc Ion Plating ◽  
Ion Plating ◽  
Gradient Diffusion ◽  
High Temperature Oxidation Behavior

Gradient Zr/ZrN/Zr layer was deposited as a diffusion barrier between the NiCrAlYSi The overlay coating and Ni-base superalloy DZ125 by arc ion plating(AIP). The microstructure and high-temperature oxidation behavior of the diffusion barrier were studied. The results show that the gradient diffusion barrier is homogeneous and compact, and has strong bond strength with the substrate. The diffusion barrier is composed of three layers, among which the inner and outer layers are rich in Zr, and the middle layer is rich in ZrN. The main phase structure of the diffusion barrier is ZrN(200). During high temperature oxidation at 1100°C, the Zr/ZrN/Zr/HY3 compound coating system presents excellent oxidation resistance.

High Temperature Oxidation Behavior of Cr–Al–Si–N Nanocomposite Films Deposited by Filtered Arc Ion Plating Technique

2020 ◽  
Vol 20 (7) ◽  
pp. 4394-4397
Author(s):  
Wang Ryeol Kim ◽  
Sungbo Heo ◽  
Hyundong Kim ◽  
Jun-Ho Kim ◽  
In-Wook Park ◽  
...  
Keyword(s):  
High Temperature ◽  
High Temperature Oxidation ◽  
Oxidation Behavior ◽  
Nanocomposite Films ◽  
Temperature Oxidation ◽  
Arc Ion Plating ◽  
Ion Plating ◽  
Plating Technique ◽  
High Temperature Oxidation Behavior ◽  
Si Content

High temperature oxidation behavior of nanocomposite films is very important characteristics for application of machining and cutting tools. Quaternary Cr–Al–Si–N nanocomposite films with various compositions were deposited onto WC-Co and Si wafer substrates using a filtered arc ion plating technique. The composition of the films were controlled by different combinations of CrAl2 and Cr4Si composite target power in a reactive gas mixture of high purity Ar and N2 during depositions. The instrumental analyses revealed that the synthesized Cr–Al–Si–N films with Si content of 2.78 at.% were nanocomposites consisting of nano-sized crystallites (3–7 nm in dia.) and a thin layer of amorphous Si3N4 phases. The nanohardness of the Cr–Al–Si–N films exhibited the maximum values of ~42 GPa at a Si content of ~2.78 at.% due to the microstructural change to nanocomposite as well as solid-solution hardening. The Cr–Al–Si–N film shows superior result of oxidation resistance at 1050 °C for 30 min in air. Based on the XRD and GDOES analyses on the oxidized films, it could be revealed that the enrichment of Al (17.94 at.%) and Cr (26.24 at.%) elements in the film leads to form an Al2O3 and Cr2O3 layer on the Cr–Al–Si–N film surface. Therefore, in this study, the microstructural changes on the mechanical properties and oxidation behavior with various compositions in the Cr–Al–Si–N nanocomposite films were discussed and correlated with the deposition parameters.

High Temperature Oxidation of TiAl(La)N Coating Deposited on a Steel Substrate by Arc-Ion Plating

2006 ◽  
Vol 510-511 ◽  
pp. 410-413
Author(s):  
Y.A. Shapovalov ◽  
Dong Bok Lee
Keyword(s):  
High Temperature ◽  
High Temperature Oxidation ◽  
Steel Substrate ◽  
Temperature Oxidation ◽  
Arc Ion Plating ◽  
Ion Plating ◽  
Outward Transport ◽  
Plating Method ◽  
High Temperature Oxidation Behavior ◽  
Kinetics Of

The high temperature oxidation behavior of the TiAl(La)N coating, which was deposited on a steel substrate by the arc-ion plating method, was investigated at 700, 800 and 900oC in atmospheric air. The oxidation kinetics of the coating were mainly governed by the inward diffusion of oxygen and outward transport of nitrogen. The oxide scale was porous, nonadherent, and prone to cracking, indicating the oxidation resistance above 700oC is poor.

High Temperature Oxidation Behavior of APM and APMT under Dry Air/Steam Condition

MRS Advances ◽  
2016 ◽  
Vol 1 (35) ◽  
pp. 2471-2476 ◽  
Author(s):  
KkochNim Oh ◽  
KwangSup Eom ◽  
Zhiyuan Liang ◽  
Preet M. Singh
Keyword(s):  
Stainless Steel ◽  
High Temperature ◽  
Thermogravimetric Analysis ◽  
Stainless Steels ◽  
High Temperature Oxidation ◽  
Oxidation Behavior ◽  
Fuel Cladding ◽  
Temperature Oxidation ◽  
Dry Air ◽  
High Temperature Oxidation Behavior

ABSTRACTOxidation behavior of alumina forming ferritic stainless steel (FeCrAl type stainless steels) grades APM and APMT, which are candidate alloys for fuel cladding, was studied using thermogravimetric analysis under dry air condition, and compared to that of ZIRLO®. In addition to the dry air condition, we also studied the high temperature oxidation behavior of APM and APMT under 100% steam condition in order to compare the effect of environment on the oxidation behavior of these alloys. APM and APMT showed an excellent oxidation resistance at high temperatures compared to ZIRLO® under dry air condition due to a stable Al2O3 oxide scale formed at the surface. Under steam condition, the oxidation rate of APM and APMT was found to be higher compared to that under the dry air condition.

Sign in / Sign up

Export Citation Format

Share Document