Multivariable adaptive distributed leader-follower flight control for multiple UAVs formation

2017 ◽  
Vol 121 (1241) ◽  
pp. 877-900 ◽  
Author(s):  
Y. Xu ◽  
Z. Zhen

ABSTRACTThe Unmanned Aerial Vehicles (UAVs) become more and more popular due to various potential application fields. This paper studies the distributed leader-follower formation flight control problem of multiple UAVs with uncertain parameters for both the leader and followers. This problem has not been addressed in the literature. Most of the existing literature considers the leader-follower formation control strategy with parametric uncertainty for the followers. However, they do not take the leader parametric uncertainty into account. Meanwhile, the distributed control strategy depends on less information interactions and is more likely to avoid information conflict. The dynamic model of the UAVs is established based on the aerodynamic parameters. The establishment of the topology structure between a collection of UAVs is based on the algebraic graph theory. To handle the parametric uncertainty of the UAVs dynamics, a multivariable model reference adaptive control (MRAC) method is addressed to design the control law, which enables follower UAVs to track the leader UAV. The stability of the formation flight control system is proved by the Lyapunov theory. Simulation results show that the proposed distributed adaptive leader-following formation flight control system has stronger robustness and adaptivity than the fixed control system, as well as the existing adaptive control system.

2019 ◽  
Vol 91 (3) ◽  
pp. 407-419
Author(s):  
Jerzy Graffstein ◽  
Piotr Maslowski

Purpose The main purpose of this work was elaboration and verification of a method of assessing the sensitivity of automatic control laws to parametric uncertainty of an airplane’s mathematical model. The linear quadratic regulator (LQR) methodology was used as an example design procedure for the automatic control of an emergency manoeuvre. Such a manoeuvre is assumed to be pre-designed for the selected airplane. Design/methodology/approach The presented method of investigating the control systems’ sensitivity comprises two main phases. The first one consists in computation of the largest variations of gain factors, defined as differences between their nominal values (defined for the assumed model) and the values obtained for the assumed range of parametric uncertainty. The second phase focuses on investigating the impact of the variations of these factors on the behaviour of automatic control in the manoeuvre considered. Findings The results obtained allow for a robustness assessment of automatic control based on an LQR design. Similar procedures can be used to assess in automatic control arrived at through varying design methods (including methods other than LQR) used to control various manoeuvres in a wide range of flight conditions. Practical implications It is expected that the presented methodology will contribute to improvement of automatic flight control quality. Moreover, such methods should reduce the costs of the mathematical nonlinear model of an airplane through determining the necessary accuracy of the model identification process, needed for assuring the assumed control quality. Originality/value The presented method allows for the investigation of the impact of the parametric uncertainty of the airplane’s model on the variations of the gain-factors of an automatic flight control system. This also allows for the observation of the effects of such variations on the course of the selected manoeuvre or phase of flight. This might be a useful tool for the design of crucial elements of an automatic flight control system.


2017 ◽  
Vol 89 (6) ◽  
pp. 764-776 ◽  
Author(s):  
Zhi Chen ◽  
Daobo Wang ◽  
Ziyang Zhen ◽  
Biao Wang ◽  
Jian Fu

Purpose This paper aims to present a control strategy that eliminates the longitudinal and lateral drifting movements of the coaxial ducted fan unmanned helicopter (UH) during autonomous take-off and landing and reduce the coupling characteristics between channels of the coaxial UH for its special model structure. Design/methodology/approach Unidirectional auxiliary surfaces (UAS) for terminal sliding mode controller (TSMC) are designed for the flight control system of the coaxial UH, and a hierarchical flight control strategy is proposed to improve the decoupling ability of the coaxial UH. Findings It is demonstrated that the proposed height control strategy can solve the longitudinal and lateral movements during autonomous take-off and landing phase. The proposed hierarchical controller can decouple vertical and heading coupling problem which exists in coaxial UH. Furthermore, the confronted UAS-TSMC method can guarantee finite-time convergence and meet the quick flight trim requirements during take-off and landing. Research limitations/implications The designed flight control strategy has not implemented in real flight test yet, as all the tests are conducted in the numerical simulation and simulation with a hardware-in-the-loop (HIL) platform. Social implications The designed flight control strategy can solve the common problem of coupling characteristics between channels for coaxial UH, and it has important theoretical basis and reference value for engineering application; the control strategy can meet the demands of engineering practice. Originality/value In consideration of the TSMC approach, which can increase the convergence speed of the system state effectively, and the high level of response speed requirements to UH flight trim, the UAS-TSMC method is first applied to the coaxial ducted fan UH flight control. The proposed control strategy is implemented on the UH flight control system, and the HIL simulation clearly demonstrates that a much better performance could be achieved.


2007 ◽  
Vol 40 (7) ◽  
pp. 171-176 ◽  
Author(s):  
Bokyung Jung ◽  
Youdan Kim ◽  
Cheolkeun Ha ◽  
Min-Jea Tahk

Sign in / Sign up

Export Citation Format

Share Document