scholarly journals Source counts and confusion at 72–231 MHz in the MWA GLEAM survey

Author(s):  
T. M. O. Franzen ◽  
T. Vernstrom ◽  
C. A. Jackson ◽  
N. Hurley-Walker ◽  
R. D. Ekers ◽  
...  

Abstract The GaLactic and Extragalactic All-sky Murchison Widefield Array survey is a radio continuum survey at 72–231 MHz of the whole sky south of declination +30º, carried out with the Murchison Widefield Array. In this paper, we derive source counts from the GaLactic and Extragalactic All-sky Murchison data at 200, 154, 118, and 88 MHz, to a flux density limit of 50, 80, 120, and 290 mJy respectively, correcting for ionospheric smearing, incompleteness and source blending. These counts are more accurate than other counts in the literature at similar frequencies as a result of the large area of sky covered and this survey’s sensitivity to extended emission missed by other surveys. At S154 MHz > 0.5 Jy, there is no evidence of flattening in the average spectral index (α ≈ −0.8 where S ∝ vα) towards the lower frequencies. We demonstrate that the Square Kilometre Array Design Study model by Wilman et al. significantly underpredicts the observed 154-MHz GaLactic and Extragalactic All-sky Murchison counts, particularly at the bright end. Using deeper Low-Frequency Array counts and the Square Kilometre Array Design Study model, we find that sidelobe confusion dominates the thermal noise and classical confusion at v ≳ 100 MHz due to both the limited CLEANing depth and the undeconvolved sources outside the field-of-view. We show that we can approach the theoretical noise limit using a more efficient and automated CLEAN algorithm.

Author(s):  
Judd D. Bowman ◽  
Iver Cairns ◽  
David L. Kaplan ◽  
Tara Murphy ◽  
Divya Oberoi ◽  
...  

AbstractSignificant new opportunities for astrophysics and cosmology have been identified at low radio frequencies. The Murchison Widefield Array is the first telescope in the southern hemisphere designed specifically to explore the low-frequency astronomical sky between 80 and 300 MHz with arcminute angular resolution and high survey efficiency. The telescope will enable new advances along four key science themes, including searching for redshifted 21-cm emission from the EoR in the early Universe; Galactic and extragalactic all-sky southern hemisphere surveys; time-domain astrophysics; and solar, heliospheric, and ionospheric science and space weather. The Murchison Widefield Array is located in Western Australia at the site of the planned Square Kilometre Array (SKA) low-band telescope and is the only low-frequency SKA precursor facility. In this paper, we review the performance properties of the Murchison Widefield Array and describe its primary scientific objectives.


2007 ◽  
Vol 3 (S244) ◽  
pp. 352-353
Author(s):  
M. Das ◽  
S. S. McGaugh ◽  
N. Kantharia ◽  
S. N. Vogel

AbstractWe present preliminary results of a study of the low frequency radio continuum emission from the nuclei of Giant Low Surface Brightness (LSB) galaxies. We have mapped the emission and searched for extended features such as radio lobes/jets associated with AGN activity. LSB galaxies are poor in star formation and generally less evolved compared to nearby bright spirals. This paper presents low frequency observations of 3 galaxies; PGC 045080 at 1.4 GHz, 610 MHz, 325MHz, UGC 1922 at 610 MHz and UGC 6614 at 610 MHz. The observations were done with the GMRT. Radio cores as well as extended structures were detected and mapped in all three galaxies; the extended emission may be assocated with jets/lobes associated with AGN activity. Our results indicate that although these galaxies are optically dim, their nuclei can host AGN that are bright in the radio domain.


Author(s):  
N. Hurley-Walker ◽  
M. D. Filipović ◽  
B. M. Gaensler ◽  
D. A. Leahy ◽  
P. J. Hancock ◽  
...  

Abstract We have detected 27 new supernova remnants (SNRs) using a new data release of the GLEAM survey from the Murchison Widefield Array telescope, including the lowest surface brightness SNR ever detected, G 0.1 – 9.7. Our method uses spectral fitting to the radio continuum to derive spectral indices for 26/27 candidates, and our low-frequency observations probe a steeper spectrum population than previously discovered. None of the candidates have coincident WISE mid-IR emission, further showing that the emission is non-thermal. Using pulsar associations we derive physical properties for six candidate SNRs, finding G 0.1 – 9.7 may be younger than 10 kyr. Sixty per cent of the candidates subtend areas larger than 0.2 deg2 on the sky, compared to < 25% of previously detected SNRs. We also make the first detection of two SNRs in the Galactic longitude range 220°–240°.


Author(s):  
Ray P. Norris ◽  
J. Afonso ◽  
D. Bacon ◽  
Rainer Beck ◽  
Martin Bell ◽  
...  

AbstractIn the lead-up to the Square Kilometre Array (SKA) project, several next-generation radio telescopes and upgrades are already being built around the world. These include APERTIF (The Netherlands), ASKAP (Australia), e-MERLIN (UK), VLA (USA), e-EVN (based in Europe), LOFAR (The Netherlands), MeerKAT (South Africa), and the Murchison Widefield Array. Each of these new instruments has different strengths, and coordination of surveys between them can help maximise the science from each of them. A radio continuum survey is being planned on each of them with the primary science objective of understanding the formation and evolution of galaxies over cosmic time, and the cosmological parameters and large-scale structures which drive it. In pursuit of this objective, the different teams are developing a variety of new techniques, and refining existing ones. To achieve these exciting scientific goals, many technical challenges must be addressed by the survey instruments. Given the limited resources of the global radio-astronomical community, it is essential that we pool our skills and knowledge. We do not have sufficient resources to enjoy the luxury of re-inventing wheels. We face significant challenges in calibration, imaging, source extraction and measurement, classification and cross-identification, redshift determination, stacking, and data-intensive research. As these instruments extend the observational parameters, we will face further unexpected challenges in calibration, imaging, and interpretation. If we are to realise the full scientific potential of these expensive instruments, it is essential that we devote enough resources and careful study to understanding the instrumental effects and how they will affect the data. We have established an SKA Radio Continuum Survey working group, whose prime role is to maximise science from these instruments by ensuring we share resources and expertise across the projects. Here we describe these projects, their science goals, and the technical challenges which are being addressed to maximise the science return.


Author(s):  
A. R. Offringa ◽  
R. B. Wayth ◽  
N. Hurley-Walker ◽  
D. L. Kaplan ◽  
N. Barry ◽  
...  

AbstractThe Murchison Widefield Array is a new low-frequency interferometric radio telescope built in Western Australia at one of the locations of the future Square Kilometre Array. We describe the automated radio-frequency interference detection strategy implemented for the Murchison Widefield Array, which is based on the aoflagger platform, and present 72–231 MHz radio-frequency interference statistics from 10 observing nights. Radio-frequency interference detection removes 1.1% of the data. Radio-frequency interference from digital TV is observed 3% of the time due to occasional ionospheric or atmospheric propagation. After radio-frequency interference detection and excision, almost all data can be calibrated and imaged without further radio-frequency interference mitigation efforts, including observations within the FM and digital TV bands. The results are compared to a previously published Low-Frequency Array radio-frequency interference survey. The remote location of the Murchison Widefield Array results in a substantially cleaner radio-frequency interference environment compared to Low-Frequency Array’s radio environment, but adequate detection of radio-frequency interference is still required before data can be analysed. We include specific recommendations designed to make the Square Kilometre Array more robust to radio-frequency interference, including: the availability of sufficient computing power for radio-frequency interference detection; accounting for radio-frequency interference in the receiver design; a smooth band-pass response; and the capability of radio-frequency interference detection at high time and frequency resolution (second and kHz-scale respectively).


Author(s):  
Randall Wayth ◽  
Marcin Sokolowski ◽  
Tom Booler ◽  
Brian Crosse ◽  
David Emrich ◽  
...  

AbstractWe describe the design and performance of the Engineering Development Array, which is a low-frequency radio telescope comprising 256 dual-polarisation dipole antennas working as a phased array. The Engineering Development Array was conceived of, developed, and deployed in just 18 months via re-use of Square Kilometre Array precursor technology and expertise, specifically from the Murchison Widefield Array radio telescope. Using drift scans and a model for the sky brightness temperature at low frequencies, we have derived the Engineering Development Array’s receiver temperature as a function of frequency. The Engineering Development Array is shown to be sky-noise limited over most of the frequency range measured between 60 and 240 MHz. By using the Engineering Development Array in interferometric mode with the Murchison Widefield Array, we used calibrated visibilities to measure the absolute sensitivity of the array. The measured array sensitivity matches very well with a model based on the array layout and measured receiver temperature. The results demonstrate the practicality and feasibility of using Murchison Widefield Array-style precursor technology for Square Kilometre Array-scale stations. The modular architecture of the Engineering Development Array allows upgrades to the array to be rolled out in a staged approach. Future improvements to the Engineering Development Array include replacing the second stage beamformer with a fully digital system, and to transition to using RF-over-fibre for the signal output from first stage beamformers.


Author(s):  
Mengyao Xue ◽  
N. D. R. Bhat ◽  
S. E. Tremblay ◽  
S. M. Ord ◽  
C. Sobey ◽  
...  

AbstractThe Murchison Widefield Array, and its recently developed Voltage Capture System, facilitates extending the low-frequency range of pulsar observations at high-time and -frequency resolution in the Southern Hemisphere, providing further information about pulsars and the ISM. We present the results of an initial time-resolved census of known pulsars using the Murchison Widefield Array. To significantly reduce the processing load, we incoherently sum the detected powers from the 128 Murchison Widefield Array tiles, which yields ~10% of the attainable sensitivity of the coherent sum. This preserves the large field-of-view (~450 deg2 at 185 MHz), allowing multiple pulsars to be observed simultaneously. We developed a WIde-field Pulsar Pipeline that processes the data from each observation and automatically folds every known pulsar located within the beam. We have detected 50 pulsars to date, 6 of which are millisecond pulsars. This is consistent with our expectation, given the telescope sensitivity and the sky coverage of the processed data (~17 000 deg2). For 10 pulsars, we present the lowest frequency detections published. For a subset of the pulsars, we present multi-frequency pulse profiles by combining our data with published profiles from other telescopes. Since the Murchison Widefield Array is a low-frequency precursor to the Square Kilometre Array, we use our census results to forecast that a survey using the low-frequency component of the Square Kilometre Array Phase 1 can potentially detect around 9 400 pulsars.


2015 ◽  
Vol 11 (3) ◽  
pp. 3171-3183
Author(s):  
Gyula Vincze

Our objective is to generalize the Weaver-Astumian (WA) and Kaune (KA) models of thermal noise limit to the case ofcellular membrane resistivity asymmetry. The asymmetry of resistivity causes different effects in the two models. In the KAmodel, asymmetry decreases the characteristic field strength of the thermal limit over and increases it below the breakingfrequency (10  m), while asymmetry decreases the spectral field strength of the thermal noise limit at all frequencies.We show that asymmetry does not change the character of the models, showing the absence of thermal noise limit at highand low frequencies in WA and KA models, respectively.


2019 ◽  
Vol 15 (S356) ◽  
pp. 375-375
Author(s):  
Sarah White

AbstractLow-frequency radio emission allows powerful active galactic nuclei (AGN) to be selected in a way that is unaffected by dust obscuration and orientation of the jet axis. It also reveals past activity (e.g. radio lobes) that may not be evident at higher frequencies. Currently, there are too few “radio-loud” galaxies for robust studies in terms of redshift-evolution and/or environment. Hence our use of new observations from the Murchison Widefield Array (the SKA-Low precursor), over the southern sky, to construct the GLEAM 4-Jy Sample (1,860 sources at S151MHz > 4 Jy). This sample is dominated by AGN and is 10 times larger than the heavily relied-upon 3CRR sample (173 sources at S178MHz > 10 Jy) of the northern hemisphere. In order to understand how AGN influence their surroundings and the way galaxies evolve, we first need to correctly identify the galaxy hosting the radio emission. This has now been completed for the GLEAM 4-Jy Sample – through repeated visual inspection and extensive checks against the literature – forming a valuable, legacy dataset for investigating relativistic jets and their interplay with the environment.


2014 ◽  
Vol 112 (16) ◽  
Author(s):  
Wenle Weng ◽  
James D. Anstie ◽  
Thomas M. Stace ◽  
Geoff Campbell ◽  
Fred N. Baynes ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document