Vertical igneous layering in the Ewarara layered intrusion, central Australia

1977 ◽  
Vol 114 (5) ◽  
pp. 365-374 ◽  
Author(s):  
A. D. T. Goode

SummaryThe Ewarara Intrusion of central Australia contains two vertical fine-banded horizons within a sequence of sub-horizontal ultramafic cumulates. The horizons are arranged in an en échelon pattern adjacent to a steep intrusional contact, and consist of an alternation of two layer types which correspond to the two major lithologies present in the horizontal sequence. The horizons are up to 5 m thick. A number of possible origins, including folding of originally horizontal cumulates, flow differentiation and multiple injection, do not satisfactorily explain the formation of the layering. The most likely origin appears to involve differential viscous flow along the steep contact of an inhomogeneous crystal mush derived from the horizontal layered sequence. This mobilization is related to fresh injections along a feeder zone trending 060µ, the only such zone recognized in the Giles Complex.

1977 ◽  
Vol 114 (3) ◽  
pp. 215-218 ◽  
Author(s):  
A. D. T. Goode

SummaryIgneous layering resulting from variations in intercumulus mineralogy has been observed in the Kalka Intrusion in central Australia. The layering is parallel to cumulus layering, and is outlined by a mottled heteradcumulus ‘clump’ texture in leucogabbros, which occur in a generally adcumulate anorthositic sequence. Such intercumulus layering is thought to originate in slow cooling intrusions at times of slow crystal accumulation and/or relatively high rates of intercumulus crystallization when a zone of melt supersaturation (the cumulus nucleation zone) rises above the intrusion floor leaving the intercumulus melt undersaturated with respect to the settled cumulus phases. Adcumulates are produced when the supersaturated zone is coincident with the top of the crystal pile. The morphological elongation of clump plates parallel to the gross layering is probably controlled by the cumulus plagioclase fabric which tends to be planar laminate.


1984 ◽  
Vol 48 (348) ◽  
pp. 345-350 ◽  
Author(s):  
Iain M. Young

Abstract An alternative explanation for the occurrence of chrome-spinel layers in the Eastern Layered Series of the Rhum intrusion is suggested by extreme concentrations of chrome-spinel in small-scale structures in the layer at the unit 7–8 boundary (Brown, 1956). These take the form of downward pointing cones several centimetres across and deep, and lined or wholly filled with chrome-spinel; lamination in the underlying allivalite exhibits quaquaversal dips around these cones. By comparing these structures to fluid escape structures in clastic sediments, it is proposed that spinel is the product of mixing and reaction of upward moving interstitial liquid and more primitive liquid newly emplaced in the chamber. Further evidence for the presence of a second liquid during spinel crystallization is provided by spherical silicate inclusions within spinel grains. Complex zoning in feldspars in the underlying allivalite suggests that the newly emplaced primitive liquid was able to penetrate the crystal mush on the intrusion floor.


2020 ◽  
Vol 61 (7) ◽  
Author(s):  
Mengxi Wang ◽  
Christina Yan Wang

Abstract The Neoproterozoic Bijigou intrusion is one of the largest and well-differentiated Fe–Ti oxide-bearing layered intrusion in Central China, and hosts Fe–Ti oxide ore layers in the middle zone with a total thickness of ∼112 m. In order to examine the role of compaction and compositional convection on the solidification of a layered intrusion associated with the crystallization of large amounts of Fe–Ti oxides, we collected the samples from a drill core profile of the apatite-oxide gabbronorite unit above the main Fe–Ti oxide layer in the middle zone of the Bijigou intrusion and carried out a detailed study on the crystal size distributions (CSDs) and trace element compositions of the fluorapatite in the samples. The apatite-oxide gabbronorite unit is mainly composed of pyroxene and plagioclase with Fe–Ti oxides and fluorapatite interstitial to the silicates, and can be further divided into the lower and upper sections in terms of grain size, rare earth element (REE) concentrations of fluorapatite and stress deformation of minerals. In the lower section, the plagioclase and pyroxene of the rocks are often bent, fluorapatite crystals have grain sizes ranging from ∼0·10 × 0·30 mm to ∼1·00 × 2·50 mm and the average Ce concentration of the fluorapatite of each sample varies from 230 to 387 μg/g. In contrast, the plagioclase and pyroxene of the rocks from the upper section are sparsely bent, fluorapatite crystals range in size from ∼0·05 × 0·05 mm to ∼0·15 × 0·40 mm, and the average Ce concentration of the fluorapatite of each sample varies from 468 to 704 μg/g. Modeling results show that the fraction of trapped liquid (FTL) is ∼7% in the lower section and ∼15% in the upper section, and relatively elevated REE (e.g. Ce) concentrations of the fluorapatite of the upper section are thus likely attributed to the trapped liquid shift (TLS) effect. The TLS effect may have also enhanced the textural coarsening of the fluorapatite of the upper section, which is illustrated by a convex-upward curve for <0·1 mm crystals and a counter-clockwise rotation around a fixed point in the CSDs of the fluorapatite. The CSDs of the fluorapatite of the lower section, however, change from a steep slope for <0·25 mm crystals to a gentle slope for >0·25 mm crystals with a kinked trend akin to mixed crystal populations, which is interpreted as the exchange of interstitial liquid with the main magma body due to compositional convection. The different FTL and fluorapatite CSDs of the lower and upper sections indicate that the interstitial liquid may have been expelled from the crystal mush of the lower section more efficiently than from the upper section, which is likely controlled by both compaction and compositional convection. However, it was the compositional convection that dominated the expulsion of interstitial liquid in the whole apatite-oxide gabbronorite unit, indicating that compositional convection may prevail after the crystallization of large amounts of Fe–Ti oxides from interstitial liquid and weaken the role of compaction.


2002 ◽  
Vol 66 (6) ◽  
pp. 895-914 ◽  
Author(s):  
D. L. Reid ◽  
I. J. Basson

Abstract Discordant veins, pipes and occasionally subconcordant sheets of iron-rich ultramafic pegmatite disrupt the layered cumulate sequence of the Upper Critical Zone, Rustenburg Layered Suite, Bushveld Complex. These pegmatite bodies have been studied where they replace the Merensky Reef footwall at Northam Platinum Mine, situated in the Swartklip Facies of the western lobe of the Rustenburg Layered Suite. Composed chiefly of ferroaugite and fayalitic olivine, the pegmatites appear to be formed by the preferential replacement of plagioclase-rich cumulates within the layered sequence. Fe-Ti oxides, sulphide (pyrrhotite and chalcopyrite) and plagioclase also occur in variable quantities. Differentiation within the pegmatite is observed where it has spread laterally beneath the impervious Merensky chromitite layer, with the development of subparallel cm-scale layers of massive magnetitite, massive sulphide and sulphide pegmatite. While some Fe-rich mobile phase must have been responsible for the pegmatites, it is concluded that the pegmatite bulk composition does not represent the original liquid. Furthermore the mode of occurrence precludes the injection of a crystal mush. Rather it is argued, mainlyon geochemical and isotopic grounds, that Fe-rich residual melts derived from the Upper Zone in the downward crosscutting gap areas migrated laterallyand upwards into the adjacent Upper Critical Zone. Variable reaction with the layered cumulates produced the anastomosing pegmatite bodies.


2020 ◽  
Vol 175 (9) ◽  
Author(s):  
Felix E. D. Kaufmann ◽  
Brian O’Driscoll ◽  
Lutz Hecht

Abstract The Rum Layered Suite, NW Scotland, hosts Cr-spinel seams at the bases of peridotite–troctolite macro-rhythmic units in the eastern portion of the intrusion. Here, we present detailed field observations together with microstructural and mineral chemical analyses for the Unit 7–8 Cr-spinel seam and associated cumulates in the Eastern Layered Intrusion. Detailed mapping and sampling reveal significant lateral variations in the structural characteristics and mineral compositions of the Unit 7–8 boundary zone rocks. Although the Cr-spinel seam is laterally continuous over ~ 3 km, it is absent towards the centre and the margins of the intrusion. The compositional characteristics of Cr-spinel and plagioclase vary systematically along strike, exhibiting a chemical evolution towards more differentiated compositions with increasing distance from the main feeder conduit of the Rum intrusion; the Long Loch Fault. On the basis of our combined datasets, we propose that the upper part of the troctolite, the anorthosite layer underlying the Cr-spinel seam and the seam itself formed during a multi-stage magma replenishment event. The stages can be summarised as follows: (1) peridotite schlieren and anorthosite autoliths formed following melt infiltration and cumulate assimilation in the crystal mush of the Unit 7 troctolite. (2) The anorthosite layer then formed from the Unit 7 troctolite crystal mush by thermal erosion and dissolution due to infiltrating magma. (3) Subsequent dissolution of the anorthosite layer by new replenishing magma led to peritectic in situ crystallisation of the Unit 7–8 Cr-spinel seam, with (4) continued magma input eventually producing the overlying Unit 8 peridotite. In the central part of the Rum Layered Suite, the aforementioned assimilation of the troctolitic footwall formed the anorthosite layer. However, the absence of anorthosite in close proximity to the Long Loch Fault can be explained by enhanced thermochemical erosion close to the feeder zone, and its absence close to the margins of the intrusion, at maximum distance from the Long Loch Fault, may be due to cooling of the magma and loss of erosion potential. In line with other recent studies on PGE-bearing chromitites in layered intrusions, we highlight the importance of multi-stage intrusive magma replenishment to the formation of spatially coupled anorthosite and Cr-spinel seams, as well as the lateral mineral chemical variations observed in the Unit 7–8 boundary zone cumulates.


1982 ◽  
Vol 45 (337) ◽  
pp. 227-236 ◽  
Author(s):  
W. J. Wadsworth ◽  
A. C. Dunham ◽  
A. A. Almohandis

AbstractThe Kapalagulu intrusion displays the following sequence of cumulus phase layering in a stratigraphic sequence of 1400 m: Basal Zone (BZ) olivine ± chromite → Intermediate Zone (IZ) olivine + plag + opx →, olivine + plag + opx + cpx → Main Zone (MZ) plag + opx + cpx → plag + cpx + Fe/Ti oxide + apatite. The corresponding cryptic variation is olivine Fo83 − 77 (limited to BZ and IZ), orthopyroxene En82 − 56, clinopyroxene Ca46Mg45Fe9 to Ca43Mg37Fe21 and plagioclase An88 − 80. Reversals of the cryptic variation occur at the base of MZ (minor reversal) and in the middle of MZ (major reversal), and are attributed to the influx of relatively primitive magma. The major reversal indicates that progressive mixing of fresh and residual magmas occurred. Because of the major reversal, inverted pigeonite appears twice in the layered sequence, but at different compositions (En65 and En56). Unlike the cumulus olivine and pyroxene, cumulus plagioclase exhibits a wide range of composition (5−10% An) in individual rocks and even in single crystals.


Sign in / Sign up

Export Citation Format

Share Document