X-ray powder diffraction study of K3H(SO4)2

1999 ◽  
Vol 14 (1) ◽  
pp. 45-48 ◽  
Author(s):  
G. V. Narasimha Rao ◽  
T. Sakuntala
Keyword(s):  
Diffraction Study ◽  
Diffraction Pattern ◽  
Powder Diffraction ◽  
Lattice Parameters ◽  
X Ray Diffraction ◽  
Space Group ◽  
X Ray

The structure of K3H(SO4)2 is found to be monoclinic with space group C2/c based on analogy of the powder X-ray diffraction pattern with that of the Rb3H(SO4)2. The lattice parameters are a=14.6984(7), b=5.6840(2), c=9.7834(5) Å, and β=103.004(5)°, Vol=796.39(5); Dx=2.589 gcm−3, Z=4, and I/Icor=1.30.

X-ray powder diffraction study on ErNi2Ge2

1999 ◽  
Vol 14 (2) ◽  
pp. 145-146
Author(s):  
Liangqin Nong ◽  
Lingmin Zeng
Keyword(s):  
Least Squares ◽  
Diffraction Study ◽  
Diffraction Pattern ◽  
Powder Diffraction ◽  
Room Temperature ◽  
Rietveld Analysis ◽  
Lattice Parameters ◽  
X Ray Diffraction ◽  
Space Group ◽  
X Ray

An X-ray diffraction pattern for ErNi2Ge2 at room temperature is reported. ErNi2Ge2 is tetragonal with lattice parameters a=4.0191(2) Å, c=9.7643(2) Å, space group I4/mmm, and Z=2. The lattice parameters derived from Rietveld analysis agree well with the results of a least-squares refinement.

Powder X-ray diffraction study of disilver(1+) pentacyanonitrosylferrate(2−)

1999 ◽  
Vol 14 (3) ◽  
pp. 219-221 ◽  
Author(s):  
V. Venegas ◽  
A. Gómez ◽  
E. Reguera
Keyword(s):  
Crystal Structure ◽  
Thermogravimetric Analysis ◽  
Diffraction Study ◽  
Powder Diffraction ◽  
Lattice Parameters ◽  
X Ray Diffraction ◽  
Density Measurements ◽  
X Ray

The crystal structure of disilver(1+) pentacyanonitrosylferrate(2−) was studied by X-ray powder diffraction. IR and Mössbauer spectroscopies, thermogravimetric analysis and density measurements were also carried out. This compound is monoclinic, and its lattice parameters are: a=10.986(3) Å, b=6.4080(10) Å, c=7.4545(19) Å, α=δ=90°, β=102.54°(2).

Boron Carbide B25C and B8C18 Synthesized Using Boric Acid-Glucose and Boric Acid-Active Carbon at Low Temperature without Coreductor Materials

2014 ◽  
Vol 896 ◽  
pp. 609-612 ◽  
Author(s):  
Mufirah Cahya Fajrah Toana ◽  
Bambang Soegijono
Keyword(s):  
Boron Carbide ◽  
Boric Acid ◽  
Diffraction Pattern ◽  
Active Carbon ◽  
Lattice Parameters ◽  
X Ray Diffraction ◽  
Absorption Bands ◽  
Space Group ◽  
X Ray ◽  
Crystal System

This study examines the formation of Boron carbide with a wide homogeneity range B8C18 and B25C, from boric acid-glucose and boric acid-active carbon as precursor materials. The samples was analysed by means of X-ray diffraction and Fourier Transform Infrared spectrometer. X-ray diffraction pattern was analysed by GSAS software. X ray diffraction pattern of B8C18 shows peaks at 27o, 39o, 45o, 65o and 79o, orthorhombic crystal system and lattice parameters a = 13.640 Ǻ, b = 7.8500 Ǻ and c = 12.910 Ǻ and space group P212121, whereas for B25C sample show peaks at 2θ angle 28o and 40o, tetragonal crystal system, and the lattice parameters a = b = 8.753 Ǻ and c = 5.093 Ǻ and space group P-4 2 m. FTIR results show that for B8C18 have absorption bands with B-C bond at 1196.5 cm-1, 0-H 3216.7 cm-1 and B-O at 1477.1 cm-1, whereas the formation B25C have absorption bands with B-C bond at 1195.1 cm-1, O-H 3216.7 cm-1 and B-O 1460.8 cm-1.

X-ray powder diffraction studies of (BaxSr1−x)2Co2Fe12O22 and (BaxSr1−x)Co2Fe16O27

2015 ◽  
Vol 30 (2) ◽  
pp. 139-148 ◽  
Author(s):  
W. Wong-Ng ◽  
G. Liu ◽  
Y. Yan ◽  
K. R. Talley ◽  
J. A. Kaduk
Keyword(s):  
Seebeck Coefficient ◽  
Powder Diffraction ◽  
Lattice Parameters ◽  
Hexagonal Ferrite ◽  
Layered Compounds ◽  
X Ray Diffraction ◽  
Powder Diffraction File ◽  
Space Group ◽  
X Ray ◽  
Diffraction Patterns

X-ray structural characterization and X-ray reference powder patterns have been determined for two series of iron- and cobalt-containing layered compounds (BaxSr1−x)2Co2Fe12O22 (x = 0.2, 0.4, 0.6, 0.8) and (BaxSr1−x)Co2Fe16O27 (x = 0.2, 0.4, 0.6, 0.8). The (BaxSr1−x)2Co2Fe12O22 series of compounds crystallized in the space group R$\bar 3$m (No. 166), with Z = 3. The structure is essentially that of the Y-type hexagonal ferrite, BaM2+Fe63+O11. The lattice parameters range from a = 5.859 15(8) to 5.843 72(8) Å, and c = 43.4975(9) to 43.3516(9) Å for x = 0.2 to 0.8, respectively. The (BaxSr1−x)Co2Fe16O27 series (W-type hexagonal ferrite) crystallized in the space group P63/mmc (No. 194) and Z = 2. The lattice parameters range from a = 5.902 05(12) to 5.8979(2) Å and c = 32.9002(10) to 32.8110(13) Å for x = 0.2 to 0.8. Results of measurements of the Seebeck coefficient and resistivity of these two sets of samples indicated that they are insulators. Powder X-ray diffraction patterns of these two series of compounds have been submitted to be included in the Powder Diffraction File.

X-ray powder diffraction data for high-temperature Al4Re(Ni)

2009 ◽  
Vol 24 (1) ◽  
pp. 29-31 ◽  
Author(s):  
B. Grushko
Keyword(s):  
High Temperature ◽  
Diffraction Pattern ◽  
Powder Diffraction ◽  
Diffraction Data ◽  
Monoclinic Phase ◽  
Binary Alloys ◽  
Powder Diffraction Data ◽  
X Ray Diffraction ◽  
Space Group ◽  
X Ray

A monoclinic phase isostructural to Al4W was revealed in Al–Ni–Re close to the Al–Re terminal. It is assumed to be a ternary extension of the high-temperature Al4Re phase usually transforming in binary alloys even by sharp quenching from the existence temperatures. The powder X-ray diffraction pattern of this phase of the Al77Ni2.5Re20.5 composition was indexed for the Cm space group with a=5.1538(12) Å, b=17.410(5) Å, c=5.1546(15) Å, and β=100.548(16)°.

Synthesis and X-ray diffraction data of 1-N-(4-pyridylmethyl)amino naphthalene

2010 ◽  
Vol 25 (1) ◽  
pp. 72-74 ◽  
Author(s):  
H. A. Camargo ◽  
J. A. Henao ◽  
D. F. Amado ◽  
V. V. Kouznetsov
Keyword(s):  
Diffraction Pattern ◽  
Powder Diffraction ◽  
Diffraction Data ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
Monoclinic System ◽  
Space Group ◽  
X Ray ◽  
Cell Parameters

1-N-(4-pyridylmethyl)amino naphtalene was synthesized by means of a reaction of alpha-naphthylamine, 4-pyridylcarboxyaldehyde, in anhydrous ethanol to obtainN-(4-pyridylen)-alpha-naphthylamine and that was reduced with NaBH4 to produce the wanted compound. The X-ray powder diffraction pattern for the new compound 1-N-(4-pyrydylmethyl)amino naphtalene was obtained. This compound crystallizes in a monoclinic system with refined unit cell parameters a=10.375(5) Å, b=17.665(6) Å, c=5.566(2) Å, β=100.11(3), and V=1004.3(5) Å3, with space group P2/m (No. 10).

Synchrotron X-ray powder diffraction pattern of the M8 murataite polytype

2017 ◽  
Vol 32 (3) ◽  
pp. 210-212 ◽  
Author(s):  
Ryosuke S. S. Maki ◽  
Peter E. D. Morgan
Keyword(s):  
Diffraction Pattern ◽  
Powder Diffraction ◽  
X Ray Diffraction ◽  
Present Evidence ◽  
Space Group ◽  
X Ray ◽  
Superior Result

The authors present here the superior result of synchrotron X-ray diffraction indexing of the 8 × 8 × 8 fluorite supercell, murataite, M8 (formula Ca66.37Mn29.33Ti186.76Zr83.35Al46.30Fe74.09O817, a = 39.277(3) Å, Z = 4). The authors present evidence that Fd$\bar 3$m (227) is the most likely space group.

Lattice parameters and spontaneous strain in AX 2 polytypes: CdI2, PbI2 SnS2 and SnSe2

1989 ◽  
Vol 22 (6) ◽  
pp. 622-623 ◽  
Author(s):  
B. Pałosz ◽  
E. Salje
Keyword(s):  
Diffraction Pattern ◽  
Powder Diffraction ◽  
Basal Plane ◽  
Lattice Parameter ◽  
Structural Transformations ◽  
Lattice Parameters ◽  
The Other ◽  
X Ray Diffraction ◽  
Spontaneous Strain ◽  
X Ray

Structural transformations between polytypes of a given material are expected to lead to lattice relaxations. Powder X-ray diffraction of basic AX 2 polytypes of CdI2, PbI2, SnS2 and SnSe2 showed these relaxations for the repetition unit along the stacking axis, conventionally the c axis. No variation of the lattice parameters were detected in the basal plane (001), except for CdI2 where small variations occur also for the a lattice parameter. The tensor of the spontaneous strain has its maximum component e 3 ≲ 12 × 10−4 for SnS2. The powder diffraction pattern and lattice parameters of the phases of CdI2 (2H, 12R, 4H), PbI2 (2H, 12R), SnS2 (2H, 18R, 4H) and SnSe2 (2H, 18R) are given. JCPDS Diffraction File Nos. are: 40-1468 for CdI2-12H; 40–1469 for CdI2-2H; 40-1466 for SnS2-18R, 40–1467 for SnS2-2H; 40–1465 for SnSe2-18R. The other polytypes studied in this paper have data in earlier sets of the PDF.

X-ray powder diffraction data for the Al–Ni–Pt χ-phase, Al74Ni7.2Pt18.8

2011 ◽  
Vol 26 (3) ◽  
pp. 283-284 ◽  
Author(s):  
B. Grushko ◽  
D. Kapush
Keyword(s):  
Diffraction Pattern ◽  
Powder Diffraction ◽  
Diffraction Data ◽  
Lattice Parameters ◽  
Powder Diffraction Data ◽  
Space Group ◽  
X Ray ◽  
Χ Phase

Ternary Al–Ni–Pt phase isostructural to Al28Ir9 was revealed at the Al74Ni7.2Pt18.8 composition. Its powder diffraction pattern was indexed for the space group P31c (No. 159) and lattice parameters a=12.095(8) and c= 26.922(17) Å.

Powder X-ray diffraction of azelastine hydrochloride, C22H25ClN3O·Cl

2020 ◽  
pp. 1-2
Author(s):  
James A. Kaduk ◽  
Amy M. Gindhart ◽  
Thomas N. Blanton
Keyword(s):  
Synchrotron Radiation ◽  
Powder Diffraction ◽  
Lattice Parameters ◽  
Powder Pattern ◽  
Monoclinic Space Group ◽  
X Ray Diffraction ◽  
Powder Diffraction File ◽  
Space Group ◽  
X Ray

Commercial azelastine hydrochloride crystallizes in the monoclinic space group P21/n (#14) with a = 13.7844(5), b = 16.39920(14), c = 9.41231(22) Å, β = 97.5340(20)°, V = 2109.32(4) Å3, and Z = 4. The lattice parameters differ by −0.02, +0.04, and +0.04% from those in the previous determination (reflecting differences in the temperature and the sample source), and are more precise, from the use of synchrotron radiation. The experimental powder pattern is included in the Powder Diffraction File™ (PDF®) as entry 00-070-1219.

Sign in / Sign up

Export Citation Format

Share Document