Reliability issues of Gallium Nitride High Electron Mobility Transistors

Author(s):  
Gaudenzio Meneghesso ◽  
Matteo Meneghini ◽  
Augusto Tazzoli ◽  
Nicolo' Ronchi ◽  
Antonio Stocco ◽  
...  

In the present paper we review the most recent degradation modes and mechanisms recently observed in AlGaN/GaN (Aluminum Gallium Nitride/Gallium Nitride). High Electron-Mobility Transistors (HEMTs), as resulting from a detailed accelerated testing campaign, based on reverse bias tests and DC accelerated life tests at various temperatures. Despite the large efforts spent in the last few years, and the progress in mean time to failure values, reliability of GaN HEMTs, and millimeter microwave integrated circuits still represent a relevant issue for the market penetration of these devices. The role of temperature in promoting GaN HEMT failure is controversial, and the accelerating degradation factors are largely unknown. The present paper proposes a methodology for the analysis of failure modes and mechanisms of GaN HEMTs, based on (i) DC and RF stress tests accompanied by an (ii) extensive characterization of traps using deep level transient spectroscopy and pulsed measurements, (iii) detailed analysis of electrical characteristics, and (iv) comparison with two-dimensional device simulations. Results of failure analysis using various microscopy and spectroscopy techniques are presented and failure mechanisms observed at the high electric field values typical of the operation of these devices are reviewed.

Author(s):  
Vladica Đorđević ◽  
Zlatica Marinković ◽  
Giovanni Crupi ◽  
Olivera Pronić-Rančić ◽  
Vera Marković ◽  
...  

2008 ◽  
Vol 1068 ◽  
Author(s):  
Kazuki Nomoto ◽  
Tomo Ohsawa ◽  
Masataka Satoh ◽  
Tohru Nakamura

ABSTRACTMultiple ion-implanted GaN/AlGaN/GaN high electron-mobility transistors (HEMTs) and preciously controlled ion-implanted resistors integrated on silicon substrate are reported. Using ion implantation into source/drain (S/D) regions, the performances were significantly improved. On-resistance reduced from 10.3 to 3.5 Ω•mm. Saturation drain current and maximum transconductance increased from 390 to 650 mA/mm and from 130 to 230 mS/mm. Measured transfer curve shows that I/O gain of 4.5 can be obtained at Vdd = 10 V.


Sign in / Sign up

Export Citation Format

Share Document