1D and 2D phase gradient perforated dielectric reflective surfaces atmmWave

2017 ◽  
Vol 10 (4) ◽  
pp. 446-452 ◽  
Author(s):  
Mustafa K. Taher Al-Nuaimi ◽  
Wei Hong ◽  
Xiqi Gao

This paper presents the design of all dielectric non-absorptive phase gradient reflective surfaces that can be used to manipulate the reflected electromagnetic waves at millimeter-wave regime. Compared with a bare perfect electrical conductor reflector which obeys the classical Snell's law of reflection, the presented design can effectively alter both the shape and level of the backscattered energy and thus radar cross section (RCS) reduction is achieved in the specular direction. One- and two-dimensional phase gradient reflective dielectric surfaces of phase change about 72° across their apertures are designed and their ability to manipulate the reflected waves under normal incidence are investigated both by means of full-wave simulations and experimentally tested for validation. More than 6 dB of specular RCS reduction is achieved from about 66.5–78.2 GHz.

2021 ◽  
Author(s):  
Panagiotis Theofanopoulos

<div> <div> <div> <p>We present novel multi-bit unit-cell topologies for reconfigurable reflective surfaces –RRSs– (e.g., reflectarray antennas) with compact designs for millimeter-wave and terahertz (mmWave/THz) applications. Typically, mmWave/THz RRSs utilize one or multiple single-pole-single-throw (SPST) switches leading to single- or dual-bit modulated surfaces. These surfaces utilize the switches to manipulate the phase of the imping waves, beamforming the reflected waves to the desired direction. As such, RRSs are leveraged either for imaging or wireless communication applications, which typically require the formation of a single beam (no grating lobes) and high gains. The gain and quantization lobe levels of an RRS is strictly related to the number of phase bits utilized in the unit-cell. Explicitly, more phase bits lead to lower quantization errors and better maximum gain/aperture efficiency. However, increasing the number of phase bits requires more SPST switches integrated within the unit-cell, leading to complex designs with high RF losses. Herein, we present, for the first time, RRSs with up to 4 phase quantization bits (16 states) that maintain one switch-per-bit topology thus retaining a low-complexity design. The proposed RRSs is presented alongside a series of analytical and full-wave simulated results. </p> </div> </div> </div>


2021 ◽  
Author(s):  
Panagiotis Theofanopoulos

<div> <div> <div> <p>We present novel multi-bit unit-cell topologies for reconfigurable reflective surfaces –RRSs– (e.g., reflectarray antennas) with compact designs for millimeter-wave and terahertz (mmWave/THz) applications. Typically, mmWave/THz RRSs utilize one or multiple single-pole-single-throw (SPST) switches leading to single- or dual-bit modulated surfaces. These surfaces utilize the switches to manipulate the phase of the imping waves, beamforming the reflected waves to the desired direction. As such, RRSs are leveraged either for imaging or wireless communication applications, which typically require the formation of a single beam (no grating lobes) and high gains. The gain and quantization lobe levels of an RRS is strictly related to the number of phase bits utilized in the unit-cell. Explicitly, more phase bits lead to lower quantization errors and better maximum gain/aperture efficiency. However, increasing the number of phase bits requires more SPST switches integrated within the unit-cell, leading to complex designs with high RF losses. Herein, we present, for the first time, RRSs with up to 4 phase quantization bits (16 states) that maintain one switch-per-bit topology thus retaining a low-complexity design. The proposed RRSs is presented alongside a series of analytical and full-wave simulated results. </p> </div> </div> </div>


Nanophotonics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 443-452
Author(s):  
Tianshu Jiang ◽  
Anan Fang ◽  
Zhao-Qing Zhang ◽  
Che Ting Chan

AbstractIt has been shown recently that the backscattering of wave propagation in one-dimensional disordered media can be entirely suppressed for normal incidence by adding sample-specific gain and loss components to the medium. Here, we study the Anderson localization behaviors of electromagnetic waves in such gain-loss balanced random non-Hermitian systems when the waves are obliquely incident on the random media. We also study the case of normal incidence when the sample-specific gain-loss profile is slightly altered so that the Anderson localization occurs. Our results show that the Anderson localization in the non-Hermitian system behaves differently from random Hermitian systems in which the backscattering is suppressed.


Research ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Jianchun Xu ◽  
Ke Bi ◽  
Ru Zhang ◽  
Yanan Hao ◽  
Chuwen Lan ◽  
...  

Electromagnetic waves carrying an orbital angular momentum (OAM) are of great interest. However, most OAM antennas present disadvantages such as a complicated structure, low efficiency, and large divergence angle, which prevents their practical applications. So far, there are few papers and research focuses on the problem of the divergence angle. Herein, a metasurface antenna is proposed to obtain the OAM beams with a small divergence angle. The circular arrangement and phase gradient were used to simplify the structure of the metasurface and obtain the small divergence angle, respectively. The proposed metasurface antenna presents a high transmission coefficient and effectively decreases the divergence angle of the OAM beam. All the theoretical analyses and derivation calculations were validated by both simulations and experiments. This compact structure paves the way to generate OAM beams with a small divergence angle.


Nanomaterials ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 1135 ◽  
Author(s):  
Ning Xu ◽  
Yaoyao Liang ◽  
Yuan Hao ◽  
Min Mao ◽  
Jianping Guo ◽  
...  

Multifunctional metasurfaces play an important role in the development of integrated optical paths. However, some of the realizations of current multifunctional metasurface devices depend on polarization selectivity, and others change the polarization state of the outgoing light. Here, based on vanadium dioxide (VO2) phase change material, a strategy to design a meta-duplex-lens (MDL) is proposed and numerical simulation calculations demonstrate that at low temperature (about 300 K), VO2 behaves as a dielectric so that the MDL can act as a transmission lens (transmission efficiency of 87.6%). Conversely, when VO2 enters the metallic state (about 355 K), the MDL has the ability to reflect and polymerize electromagnetic waves and works as a reflection lens (reflection efficiency of 85.1%). The dielectric waveguide and gap-surface plasmon (GSP) theories are used in transmission and reflection directions, respectively. In order to satisfy the coverage of the phase gradient in the range of 2π in both cases, we set the antenna as a nanopillar with a high aspect ratio. It is notable that, via symmetrical antennas acting in concert with VO2 phase change material, the polarization states of both the incident light and the outgoing light are not changed. This reversible tuning will play a significant role in the fields of imaging, optical storage devices, communication, sensors, etc.


2015 ◽  
Vol 151 ◽  
pp. 95-107 ◽  
Author(s):  
Sidharath Jain ◽  
Raj Mittra ◽  
Joe Wiart

Sign in / Sign up

Export Citation Format

Share Document