Prediction of a Swirl-Stabilized CH4/H2 Flame Structure Using Conditional Moment Closure Coupled with OpenFOAM

2020 ◽  
Vol 34 (2) ◽  
pp. 2376-2384
Author(s):  
Pranit Gaikwad ◽  
S. Sreedhara
Keyword(s):  
Flame Structure ◽  
Moment Closure ◽  
Conditional Moment ◽  
Conditional Moment Closure

scholarly journals Investigation of Flame Structure and Soot Formation in a Single Sector Model Combustor Using Experiments and Numerical Simulations Based on the Large Eddy Simulation/Conditional Moment Closure Approach

2018 ◽  
Vol 140 (6) ◽  
Author(s):  
Andrea Giusti ◽  
Epaminondas Mastorakos ◽  
Christoph Hassa ◽  
Johannes Heinze ◽  
Eggert Magens ◽  
...  
Keyword(s):  
Large Eddy Simulation ◽  
Soot Formation ◽  
Flame Structure ◽  
Moment Closure ◽  
Conditional Moment ◽  
Lean Burn ◽  
Eddy Simulation ◽  
Conditional Moment Closure ◽  
Soot Precursors ◽  
Large Eddy

In this work, a single sector lean burn model combustor operating in pilot only mode has been investigated using both experiments and computations with the main objective of analyzing the flame structure and soot formation at conditions relevant to aero-engine applications. Numerical simulations were performed using the large eddy simulation (LES) approach and the conditional moment closure (CMC) combustion model with detailed chemistry and a two-equation model for soot. The CMC model is based on the time-resolved solution of the local flame structure and allows to directly take into account the phenomena associated to molecular mixing and turbulent transport, which are of great importance for the prediction of emissions. The rig investigated in this work, called big optical single sector rig, allows to test real scale lean burn injectors. Experiments, performed at elevated pressure and temperature, corresponding to engine conditions at part load, include planar laser-induced fluorescence of OH (OH-PLIF) and phase Doppler anemometry (PDA) and have been complemented with new laser-induced incandescence (LII) measurements for soot location. The wide range of measurements available allows a comprehensive analysis of the primary combustion region and can be exploited to further assess and validate the LES/CMC approach to capture the flame behavior at engine conditions. It is shown that the LES/CMC approach is able to predict the main characteristics of the flame with a good agreement with the experiment in terms of flame shape, spray characteristics and soot location. Finite-rate chemistry effects appear to be very important in the region close to the injection location leading to the lift-off of the flame. Low levels of soot are observed immediately downstream of the injector exit, where a high amount of vaporized fuel is still present. Further downstream, the fuel vapor disappears quite quickly and an extended region characterized by the presence of pyrolysis products and soot precursors is observed. The strong production of soot precursors together with high soot surface growth rates lead to high values of soot volume fraction in locations consistent with the experiment. Soot oxidation is also very important in the downstream region resulting in a decrease of the soot level at the combustor exit. The results show a very promising capability of the LES/CMC approach to capture the main characteristics of the flame, soot formation, and location at engine relevant conditions. More advanced soot models will be considered in future work in order to improve the quantitative prediction of the soot level.

Modeling an Enclosed, Turbulent Reacting Methane Jet With the Premixed Conditional Moment Closure Method

2013 ◽  
Author(s):  
Scott Martin ◽  
Aleksandar Jemcov ◽  
Björn de Ruijter
Keyword(s):  
Turbulent Combustion ◽  
Large Scale ◽  
Reaction Rates ◽  
Moment Closure ◽  
Scalar Dissipation ◽  
Small Scale ◽  
Conditional Moment ◽  
Progress Variable ◽  
Conditional Moment Closure ◽  
Scale Turbulence

Here the premixed Conditional Moment Closure (CMC) method is used to model the recent PIV and Raman turbulent, enclosed reacting methane jet data from DLR Stuttgart [1]. The experimental data has a rectangular test section at atmospheric pressure and temperature with a single inlet jet. A jet velocity of 90 m/s is used with an adiabatic flame temperature of 2,064 K. Contours of major species, temperature and velocities along with velocity rms values are provided. The conditional moment closure model has been shown to provide the capability to model turbulent, premixed methane flames with detailed chemistry and reasonable runtimes [2]. The simplified CMC model used here falls into the class of table lookup turbulent combustion models where the chemical kinetics are solved offline over a range of conditions and stored in a table that is accessed by the CFD code. Most table lookup models are based on the laminar 1-D flamelet equations, which assume the small scale turbulence does not affect the reaction rates, only the large scale turbulence has an effect on the reaction rates. The CMC model is derived from first principles to account for the effects of small scale turbulence on the reaction rates, as well as the effects of the large scale mixing, making it more versatile than other models. This is accomplished by conditioning the scalars with the reaction progress variable. By conditioning the scalars and accounting for the small scale mixing, the effects of turbulent fluctuations of the temperature on the reaction rates are more accurately modeled. The scalar dissipation is used to account for the effects of the small scale mixing on the reaction rates. The original premixed CMC model used a constant value of scalar dissipation, here the scalar dissipation is conditioned by the reaction progress variable. The steady RANS 3-D version of the open source CFD code OpenFOAM is used. Velocity, temperature and species are compared to the experimental data. Once validated, this CFD turbulent combustion model will have great utility for designing lean premixed gas turbine combustors.

Simulations of Diesel Sprays Using the Conditional Moment Closure Model

2013 ◽  
Vol 6 (2) ◽  
pp. 1249-1261 ◽  
Author(s):  
Michele Bolla ◽  
Thordur Gudmundsson ◽  
Yuri M. Wright ◽  
Konstantinos Boulouchos
Keyword(s):  
Moment Closure ◽  
Closure Model ◽  
Conditional Moment ◽  
Diesel Sprays ◽  
Conditional Moment Closure

Conditional Moment Closure Approaches for Simulating Soot and NOx in a Heavy-Duty Diesel Engine

2021 ◽  
Author(s):  
Shrey Trivedi ◽  
Savvas Gkantonas ◽  
Yuri M. Wright ◽  
Matteo Parravicini ◽  
Christophe Barro ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Moment Closure ◽  
Heavy Duty ◽  
Conditional Moment ◽  
Conditional Moment Closure ◽  
Heavy Duty Diesel Engine ◽  
Heavy Duty Diesel

scholarly journals Flow Inhomogeneities in a Realistic Aeronautical Gas-Turbine Combustor: Formation, Evolution and Indirect Noise

2018 ◽  
Author(s):  
Andrea Giusti ◽  
Luca Magri ◽  
Marco Zedda
Keyword(s):  
Gas Turbines ◽  
Transfer Functions ◽  
Guide Vane ◽  
Flame Structure ◽  
Combustion Noise ◽  
Moment Closure ◽  
Combustion Model ◽  
Conditional Moment ◽  
Eddy Simulation ◽  
Nozzle Guide

Indirect noise generated by the acceleration of combustion inhomogeneities is an important aspect in the design of aeroengines because of its impact on the overall noise emitted by an aircraft and the possible contribution to combustion instabilities. In this study, a realistic rich-quench-lean combustor is numerically investigated, with the objective of quantitatively analyzing the formation and evolution of flow inhomogeneities and determine the level of indirect combustion noise in the nozzle guide vane (NGV). Both entropy and compositional noise are calculated in this work. A high-fidelity numerical simulation of the combustion chamber, based on the Large-Eddy Simulation (LES) approach with the Conditional Moment Closure (CMC) combustion model, is performed. The contributions of the different air streams to the formation of flow inhomogeneities are pinned down and separated with seven dedicated passive scalars. LES-CMC results are then used to determine the acoustic sources to feed an NGV aeroacoustic model, which outputs the noise generated by entropy and compositional inhomogeneities. Results show that non-negligible fluctuations of temperature and composition reach the combustor’s exit. Combustion inhomogeneities originate both from finite-rate chemistry effects and incomplete mixing. In particular, the role of mixing with dilution and liner air flows on the level of combustion inhomogeneities at the combustor’s exit is highlighted. The species that most contribute to indirect noise are identified and the transfer functions of a realistic NGV are computed. The noise level indicates that indirect noise generated by temperature fluctuations is larger that the indirect noise generated by compositional inhomogeneities, although the latter is not negligible and is expected to become louder in supersonic nozzles. It is also shown that relatively small fluctuations of the local flame structure can lead to significant variations of the nozzle transfer function, whose gain increases with the Mach number. This highlights the necessity of an on-line solution of the local flame structure, which is performed in this paper by CMC, for an accurate prediction of the level of compositional noise. This study opens new possibilities for the identification, separation and calculation of the sources of indirect combustion noise in realistic aeronautical gas turbines.

Sign in / Sign up

Export Citation Format

Share Document