scholarly journals Dispersions of Zirconia Nanoparticles Close to the Phase Boundary of Surfactant-Free Ternary Mixtures

Langmuir ◽  
2021 ◽  
Author(s):  
Andrea Fiorati ◽  
Federico Florit ◽  
Andrea Mazzei ◽  
Stefano Buzzaccaro ◽  
Barbara Rossi ◽  
...  
MRS Advances ◽  
2020 ◽  
Vol 5 (61) ◽  
pp. 3123-3131
Author(s):  
Mario Flores Nicolas ◽  
Marina Vlasova ◽  
Pedro Antonio Márquez Aguilar ◽  
Mykola Kakazey ◽  
Marcos Mauricio Chávez Cano ◽  
...  

AbstractThe low-temperature synthesis of bricks prepared from high-siliceous clays by the method of plastic molding of blanks was used. For the preparation of brick blanks, binary and ternary mixtures of high-siliceous clays, black sand, and bottle glass cullet were used. Gray-black low-porosity and high-porosity ceramics was obtained by sintering under conditions of oxygen deficiency. It has been established that to initiate plastic in mixtures containing high-siliceous clay, it is necessary to add montmorillonite/bentonite additives, carry out low-temperature sintering, and introduce low-melting glass additives with a melting point ranging from 750 to 800 °C. The performed investigations have shown that the sintering of mixtures with a total content of iron oxide of about 5 wt% under reducing conditions at Tsint. = 800°C for 8 h leads to the formation of glass ceramics consisting of quartz, feldspars, and a phase. The main sources of the appearance of a dark color is the formation of [Fe3+O4]4- and [Fe3+O6]9- anions in the composition of the glass phase and feldspars. By changing the contents of clay, sand, and glass in sintering, it is possible to obtain two types of ceramic materials: (a) in the form of building bricks and (b) in the form of porous fillers.


2015 ◽  
Vol 52 (3) ◽  
pp. 252-255 ◽  
Author(s):  
Li Tang ◽  
Xiaochen Liu ◽  
Jinping Niu ◽  
Xiaoyu Wang

2008 ◽  
Vol 59 (5) ◽  
Author(s):  
Viorel Feroiu ◽  
Dan Geana ◽  
Catinca Secuianu

Vapour � liquid equilibrium, thermodynamic and volumetric properties were predicted for three pure hydrofluorocarbons: difluoromethane (R32), pentafluoroethane (R125) and 1,1,1,2 � tetrafluoroethane (R134a) as well as for binary and ternary mixtures of these refrigerants. Three cubic equations of state GEOS3C, SRK (Soave � Redlich � Kwong) and PR (Peng � Robinson) were used. A wide comparison with literature experimental data was made. For the refrigerant mixtures, classical van der Waals mixing rules without interaction parameters were used. The GEOS3C equation, with three parameters estimated by matching several points on the saturation curve (vapor pressure and corresponding liquid volumes), compares favorably to other equations in literature, being simple enough for applications.


1979 ◽  
Vol 44 (8) ◽  
pp. 2378-2383 ◽  
Author(s):  
Libor Červený ◽  
Radka Junová ◽  
Vlastimil Růžička

Hydrogenation of olefinic substrates in binary and ternary mixtures using 5% Pt on silica gel as the catalyst was studied in normal conditions in the liquid phase with methanol or cyclohexane or in solvent-free systems. The effect of the solvent concentration on the selectivity of hydrogenation of the unsaturated alcohol-olefin binary mixtures was investigated. In ternary systems of unsaturated substrates, the effect of each of the substrates on the selectivity of hydrogenation of the remaining two substances was examined. Another system was found in which a jump change of the hydrogenation selectivity occurred on the vanishing of the fastest reacting substance.


1985 ◽  
Vol 50 (11) ◽  
pp. 2493-2508 ◽  
Author(s):  
Petr Kyselka ◽  
Zdeněk Havlas ◽  
Ivo Sláma

Solvation of Li+, Be2+, Na+, Mg2+, and Al3+ ions has been studied in binary mixtures with dimethyl sulphoxide, dimethylformamide, acetonitrile and water, and in ternary mixtures of the organic solvents with water. The CNDO/2 quantum chemical method was used to calculate the energies of solvation, molecular structures and charge distributions for the complexes acetonitrile...ion (1:1, 2:1, 4:1), dimethyl sulphoxide...ion (1:1), dimethylformamide...ion (1:1), and acetonitrile (dimethyl sulphoxide, dimethylformamide)...ion...water (1:1:1).


Author(s):  
Kie Zuraw

This chapter examines the phonological rule of nasal substitution in Tagalog, specifically its rate of application in different constructions. Nasal substitution can occur whenever a prefix that ends in /ŋ/ attaches to a stem beginning with an obstruent, as in /maŋ + bigáj/ → [mamigáj] ‘to distribute’. Different prefixes trigger nasal substitution at different rates. This is similar to cases in which word-internal syntactic structure determines how and whether a phonological rule applies (e.g. Newell and Piggott 2014), but different because none of these words’ syntactic structure absolutely prevents nasal substitution, such as by placing a phase boundary between the prefix and stem. The focus of the chapter is on laying out the data, but it does suggest three possible interpretations: variable syntactic structure, a phonology directly sensitive to prefix identity, or competition between productive syntactic structure and lexicalized pronunciation.


Sign in / Sign up

Export Citation Format

Share Document