Dynamics of Preaggregation and Film Formation of Donor–Acceptor π-Conjugated Polymers

2021 ◽  
pp. 205-211
Author(s):  
Yuta Yabuuchi ◽  
Yu Minowa ◽  
Shuichi Nagamatsu ◽  
Akihiko Fujii ◽  
Masanori Ozaki
Keyword(s):  
Conjugated Polymers ◽  
Film Formation ◽  
Donor Acceptor

scholarly journals Influence of Backbone Curvature on the Organic Electrochemical Transistor Performance of Glycolated Donor‐Acceptor Conjugated Polymers

2021 ◽  
Author(s):  
Bowen Ding ◽  
Gunwoo Kim ◽  
Youngseok Kim ◽  
Flurin D. Eisner ◽  
Edgar Gutiérrez-Fernández ◽  
...  
Keyword(s):  
Conjugated Polymers ◽  
Electrochemical Transistor ◽  
Donor Acceptor

scholarly journals Backbone Effects on the Thermoelectric Properties of Ultra-Small Bandgap Conjugated Polymers

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2486
Author(s):  
Dexun Xie ◽  
Jing Xiao ◽  
Quanwei Li ◽  
Tongchao Liu ◽  
Jinjia Xu ◽  
...  
Keyword(s):  
Conjugated Polymers ◽  
Power Factor ◽  
Carrier Mobility ◽  
Polymeric Materials ◽  
Thermoelectric Performance ◽  
Organic Thermoelectric Materials ◽  
Higher Power ◽  
Donor Acceptor ◽  
Maximum Power Factor ◽  
Higher Carrier Mobility

Conjugated polymers with narrower bandgaps usually induce higher carrier mobility, which is vital for the improved thermoelectric performance of polymeric materials. Herein, two indacenodithiophene (IDT) based donor–acceptor (D-A) conjugated polymers (PIDT-BBT and PIDTT-BBT) were designed and synthesized, both of which exhibited low-bandgaps. PIDTT-BBT showed a more planar backbone and carrier mobility that was two orders of magnitude higher (2.74 × 10−2 cm2V−1s−1) than that of PIDT-BBT (4.52 × 10−4 cm2V−1s−1). Both exhibited excellent thermoelectric performance after doping with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane, where PIDTT-BBT exhibited a larger conductivity (0.181 S cm−1) and a higher power factor (1.861 μW m−1 K−2) due to its higher carrier mobility. The maximum power factor of PIDTT-BBT reached 4.04 μW m−1 K−2 at 382 K. It is believed that conjugated polymers with a low bandgap are promising in the field of organic thermoelectric materials.

scholarly journals Efficient Inverted Solar Cells Using Benzotriazole-Based Small Molecule and Polymers

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 393
Author(s):  
Ja Eun Lee ◽  
Yoon Kim ◽  
Yang Ho Na ◽  
Nam Seob Baek ◽  
Jae Woong Jung ◽  
...  
Keyword(s):  
Solar Cell ◽  
Conjugated Polymers ◽  
Power Conversion ◽  
High Energy ◽  
Photovoltaic Properties ◽  
Device Structures ◽  
Donor Acceptor ◽  
Medium Band ◽  
Inverted Solar Cell ◽  
Conventional Device

We synthesized medium-band-gap donor-acceptor (D-A) -type conjugated polymers (PBTZCZ-L and PBTZCZ-H) consisting of a benzotriazole building block as an acceptor and a carbazole unit as a donor. In comparison with the polymers, a small conjugated molecule (BTZCZ-2) was developed, and its structural, thermal, optical, and photovoltaic properties were investigated. The power conversion efficiency (PCE) of the BTZCZ-2-based solar cell devices was less than 0.5%, considerably lower than those of polymer-based devices with conventional device structures. However, inverted solar cell devices configured with glass/ITO/ZnO:PEIE/BTZCZ-2:PC71BM/MoO3/Ag showed a tremendously improved efficiency (PCE: 5.05%, Jsc: 9.95 mA/cm2, Voc: 0.89 V, and FF: 57.0%). We believe that this is attributed to high energy transfer and excellent film morphologies.

Band-gap tuning of carbazole-containing donor–acceptor type conjugated polymers by acceptor moieties and π-spacer groups

Polymer ◽  
2008 ◽  
Vol 49 (1) ◽  
pp. 192-199 ◽  
Author(s):  
Tsuyoshi Michinobu ◽  
Kensuke Okoshi ◽  
Haruka Osako ◽  
Hiroe Kumazawa ◽  
Kiyotaka Shigehara
Keyword(s):  
Conjugated Polymers ◽  
Band Gap ◽  
Donor Acceptor ◽  
Band Gap Tuning

Donor–Acceptor Conjugated Polymers Based on Bisisoindigo: Energy Level Modulation toward Unipolar n-Type Semiconductors

2018 ◽  
Vol 51 (21) ◽  
pp. 8652-8661 ◽  
Author(s):  
Fangzheng Chen ◽  
Yu Jiang ◽  
Ying Sui ◽  
Jidong Zhang ◽  
Hongkun Tian ◽  
...  
Keyword(s):  
Energy Level ◽  
Conjugated Polymers ◽  
Donor Acceptor

scholarly journals Conjugated Polymer Donor-Molecular Acceptor Nanohybrids for Photocatalytic Hydrogen Evolution

2019 ◽  
Author(s):  
Haofan Yang ◽  
Xiaobo Li ◽  
Reiner Sebastian Sprick ◽  
Andrew I. Cooper
Keyword(s):  
Photocatalytic Activity ◽  
Charge Transfer ◽  
Conjugated Polymers ◽  
Hydrogen Evolution ◽  
Conjugated Polymer ◽  
Apparent Quantum Yield ◽  
High Hydrogen ◽  
Photocatalytic Hydrogen Evolution ◽  
Efficient Charge ◽  
Donor Acceptor

A library of 237 organic binary/ternary nanohybrids consisting of conjugated polymers donors and both fullerene and non-fullerene molecular acceptors was prepared and screened for sacrificial photocatalytic hydrogen evolution. These donor-acceptor nanohybrids (DANHs) showed significantly enhanced hydrogen evolution rates compared with the parent donor or acceptor compounds. DANHs of <a></a><a>a polycarbazole</a>-based donor combined with a methanofullerene acceptor (PCDTBT/PC<sub>60</sub>BM) showed a high hydrogen evolution rate of 105.2 mmol g<sup>-1</sup> h<sup>-1</sup> under visible light (λ > 420 nm). This DANH photocatalyst produced 5.9 times more hydrogen than a sulfone-containing polymer (P10) under the same conditions, which is one of the most efficient organic photocatalysts reported so far. An apparent quantum yield of hydrogen evolution of 3.0 % at 595 nm was measured for this DANH. The photocatalytic activity of the DANHs, which in optimized cases reached 179.0 mmol g<sup>-1</sup> h<sup>-1</sup>, is attributed to efficient charge transfer at the polymer donor/molecular acceptor interface. We also show that ternary donor<sub>A</sub>-donor<sub>B</sub>-acceptor nanohybrids can give higher activities than binary donor-acceptor hybrids in some cases.

Sign in / Sign up

Export Citation Format

Share Document