Attainment and Load Extension of High-Efficiency Premixed Low-Temperature Combustion with Dieseline in a Compression Ignition Engine

2010 ◽  
Vol 24 (6) ◽  
pp. 3517-3525 ◽  
Author(s):  
Dong Han ◽  
Andrew M. Ickes ◽  
Dennis N. Assanis ◽  
Zhen Huang ◽  
Stanislav V. Bohac
Keyword(s):  
Low Temperature ◽  
High Efficiency ◽  
Low Temperature Combustion ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Temperature Combustion ◽  
Premixed Low Temperature Combustion

Performance of multi-dimensional models for simulating diesel premixed charge compression ignition engine combustion using low- and high-pressure injectors

2005 ◽  
Vol 6 (5) ◽  
pp. 475-486 ◽  
Author(s):  
S-C Kong ◽  
Y Ra ◽  
R D Reitz
Keyword(s):  
High Pressure ◽  
Low Temperature ◽  
Spray Angle ◽  
Low Temperature Combustion ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Detailed Chemistry ◽  
Engine Combustion ◽  
Temperature Combustion ◽  
Hsdi Diesel Engine

An engine CFD model has been developed to simulate premixed charge compression ignition (PCCI) combustion using detailed chemistry. The numerical model is based on the KIVA code that is modified to use CHEMKIN as the chemistry solver. The model was applied to simulate ignition, combustion, and emissions processes in diesel engines operated to achieve PCCI conditions. Diesel PCCI experiments using both low- and high-pressure injectors were simulated. For the low-pressure injector with early injection (close to intake valve closure), the model shows that wall wetting can be minimized by using a pressure-swirl atomizer with a variable spray angle. In the case of using a high-pressure injector, it is found that late injection (SOI = 5 ° ATDC) benefits soot emissions as a result of low-temperature combustion at highly premixed conditions. The model was also used to validate the emission reduction potential of an HSDI diesel engine using a double injection strategy that favours PCCI conditions. It is concluded that the present model is useful to assess future engine combustion concepts, such as PCCI and low-temperature combustion (LTC).

Low Cetane Fuels in Compression Ignition Engine to Achieve LTC

2011 ◽  
Author(s):  
Swami Nathan Subramanian ◽  
Stephen Ciatti
Keyword(s):  
Low Temperature ◽  
Internal Combustion Engines ◽  
High Efficiency ◽  
Fuel Efficiency ◽  
Nox Emissions ◽  
Low Temperature Combustion ◽  
Compression Ignition ◽  
Oxides Of Nitrogen ◽  
Compression Ignition Engine ◽  
Conventional Combustion

The conventional combustion processes of Spark Ignition (SI) and Compression Ignition (CI) have their respective merits and demerits. Internal combustion engines use certain fuels to utilize those conventional combustion technologies. High octane fuels are required to operate the engine in SI mode, while high cetane fuels are preferable for CI mode of operation. Those conventional combustion techniques struggle to meet the current emissions norms while retaining high efficiency. In particular, oxides of nitrogen (NOx) and particulate matter (PM) emissions have limited the utilization of diesel fuel in compression ignition engines, and conventional gasoline operated SI engines are not fuel efficient. Advanced combustion concepts have shown the potential to combine fuel efficiency and improved emissions performance. Low Temperature Combustion (LTC) offers reduced NOx and PM emissions with comparable modern diesel engine efficiencies. The ability of premixed, low-temperature compression ignition to deliver low PM and NOx emissions is dependent on achieving optimal combustion phasing. Variations in injection pressures, injection schemes and Exhaust Gas Recirculation (EGR) are studied with low octane gasoline LTC. Reductions in emissions are a function of combustion phasing and local equivalence ratio. Engine speed, load, EGR quantity, compression ratio and fuel octane number are all factors that influence combustion phasing. Low cetane fuels have shown comparable diesel efficiencies with low NOx emissions at reasonably high power densities.

Investigation of Low Temperature Combustion Regimes of Biodiesel With n-Butanol Injected in the Intake Manifold of a Compression Ignition Engine

2012 ◽  
Author(s):  
Valentin Soloiu ◽  
Marvin Duggan ◽  
Henry Ochieng ◽  
David Williams ◽  
Gustavo Molina ◽  
...  
Keyword(s):  
Low Temperature ◽  
Heat Release ◽  
Combustion Chamber ◽  
Nox Reduction ◽  
Intake Manifold ◽  
Power Stroke ◽  
Low Temperature Combustion ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Temperature Combustion

In this study, the in-cylinder soot and NOx trade off was investigated in a Compression Engine by implementing Premixed Charge Compression Ignition (PCCI) coupled with Low Temperature Combustion (LTC) for selected regimes of 1–3 bars IMEP. In order to achieve that, an omnivorous (multi-fuel) single cylinder diesel engine was developed by injecting n-butanol in the intake port while being fueled with biodiesel by direct injection in the combustion chamber. By applying this methodology, the in-cylinder pressure decreased by 25% and peak pressure was delayed in the power stroke by about 8 CAD for the cycles in which the n-butanol was injected in the intake manifold at the engine speed of 800 rpm and low engine loads, corresponding to 1–3 bars IMEP. Compared with the baseline taken with ultra-low sulfur diesel no. 2 (USLD#2), the heat release presented a more complex shape. At 1–2 bars IMEP, the premixed charge stage of the combustion totally disappeared and a prolonged diffusion stage was found instead. At 3 bars IMEP, an early low temperature heat release was present that started 6 degrees (1.25 ms) earlier than the diesel reference heat release with a peak at 350 CAD corresponding to 1200 K. Heat losses from radiation of burned gas in the combustion chamber decreased by 10–50% while the soot emissions showed a significant decrease of about 98%, concomitantly with a 98% NOx reduction at 1 IMEP, and 77% at 3 IMEP, by controlling the combustion phases. Gaseous emissions were measured using an AVL SESAM FTIR and showed that there were high increases in CO, HC and NMHC emissions as a result of PCCI/LTC strategy; nevertheless, the technology is still under development. The results of this work indicate that n-butanol can be a very promising fuel alternative including for LTC regimes.

Sign in / Sign up

Export Citation Format

Share Document