The Influence of Cycle-to-Cycle Hydrocarbon Emissions On Cyclic NO:NO2 Ratio from a HSDI Diesel Engine

Knowledge of the NO:NO2 ratio emitted from a diesel engine is particularly important for ensuring the highest performance of SCR NOx aftertreatment systems. As real driving emissions from vehicles increase in importance, the need to understand the NO:NO2 ratio emitted from a diesel engine during transient operation similarly increases. In this study, crank-angle resolved NO and NO2 measurements using fast response CLD (for NO) and a new fast LIF instrument (for NO2) have been taken from a single cylinder diesel engine at three different speed and load points including a point with and without EGR. In addition, crank-angle resolved unburned hydrocarbon (UHC) measurements have been taken simultaneously using a fast FID. A variation of the NO:NO2 ratio through the engine's exhaust stroke is also observed indicative of in-cylinder stratification of NO and NO2. A new link between the NO:NO2 ratio and the UHC emissions from an individual engine cycle is observed - the results show that where there are higher levels of UHC emissions in the first part of the exhaust stroke (blowdown), the proportion of NO2 emitted from that cycle is increased. This effect is observed and analysed across all test points and with and without EGR. The performance of the new fast LIF analyser has also been evaluated, in comparison with the previous state-of-the-art and standard "slow" emissions measurement apparatus showing a reduction in the noise of the measurement by an order of magnitude.

The Influence of Cycle-to-Cycle Hydrocarbon Emissions on Cyclic NO:NO2 Ratio From a HSDI Diesel Engine

Knowledge of the NO:NO2 ratio emitted from a diesel engine is particularly important for ensuring the highest performance of SCR NOx aftertreatment systems. As real driving emissions from vehicles increase in importance, the need to understand the NO:NO2 ratio emitted from a diesel engine during transient operation similarly increases. Previous work by the authors identified significant differences in NO:NO2 ratio throughout the exhaust period of a single engine cycle, with proportionally more NO2 being emitted during the blowdown period compared to the rest of the exhaust stroke. At the time it was not known what caused this effect. In this study, crank-angle resolved NO and NO2 measurements using fast response CLD (for NO) and a new fast LIF instrument (for NO2) have been taken from a single cylinder high-speed light duty diesel engine at three different speed and load points including a point with and without EGR. In addition, crank-angle resolved unburned hydrocarbon (UHC) measurements have been taken simultaneously using a fast FID. The NOx emitted per cycle and the peak cylinder pressure of that cycle have showed high correlation coefficients (R2 < 0.97 at all test points) in this work. In addition, a variation of the NO:NO2 ratio through the engine’s exhaust stroke is also observed indicative of in-cylinder stratification of NO and NO2. A new link between the NO:NO2 ratio and the UHC emissions from an individual engine cycle is observed — the results show that where there are higher levels of UHC emissions in the first part of the exhaust stroke (blowdown), perhaps caused by injector dribble or release from crevices, the proportion of NO2 emitted from that cycle is increased. This effect is observed and analysed across all test points and with and without EGR. The performance of the new fast LIF analyser has also been evaluated, in comparison with the previous state-of-the-art and standard “slow” emissions measurement apparatus showing a reduction in the noise of the measurement by an order of magnitude.

Performance of HSDI diesel-engine generator using the blend of B5, n-butanol and ethanol as increased to 20%

B5, diesel mixed with 5% biodiesel, is currently being developed to replace diesel, but there was lower engine performance. To improve the B5 properties, the addition of oxygenated additive is a better method. This research aims to study the performance of a high-speed direct injection (HSDI) diesel-engine generator at speed 3,000 rpm and different loads by using B5 blended to n-butanol and ethanol as increased to 20%. Results show that the use of B5-butanol-ethanol blends decreased engine performance as increasing ethanol; however, the release of nitric oxide, carbon monoxide, and black smoke was remarkably reduced as compared with B5. However, the use of B5 blended to 5% n-butanol, and 5% ethanol increased the electrical power to 0.33%, while electrical efficiency was added to 1.13%, and SFC was similar to B5. Therefore, this ratio can be applied with the diesel engines in the future.

Cycle-to-Cycle NO and NOx Emissions From a HSDI Diesel Engine

Engine-out NOx emissions from diesel engines continue to be a major topic of research interest. While substantial understanding has been obtained of engine-out (i.e., before any aftertreatment) NOx formation and reduction techniques, not least exhaust gas recirculation (EGR) which is now well established and fitted to production vehicles, much less data are available on cycle resolved NOx emissions. In this work, crank-angle resolved NO and NOx measurements have been taken from a high-speed light duty diesel engine at test conditions both with and without EGR. These have been combined with 1D data of exhaust flow, and this used to form a mass average of NO and NOx emissions per cycle. These results have been compared with combustion data and other emissions. The results show that there is a very strong correlation (R2 > 0.95) between the NOx emitted per cycle and the peak cylinder pressure of that cycle. In addition, the crank-angle resolved NO and NOx measurements also reveal that there is a difference in NO : NO2 ratio (where NO2 is assumed to be the difference between NO and NOx) during the exhaust period, with proportionally more NO2 being emitted during the blowdown period compared to the rest of the exhaust stroke.