Rheological measurements were conducted on a variety of anaerobically digested sewage sludges to evaluate the potential use of rheology in describing the effects of chemical conditioning on the physical characteristics of sludges.
The objectives of the study were to evaluate the influence of the method of chemical conditioning on rheological measurements; to determine the response of the viscometer system to changes in the instrument variables; and to evaluate interrelationships between rheology and other physical properties. All rheological measurements were made using a coaxial rotational viscometer.
Evaluation of a variety of test procedures identified that both the method of adding chemical conditioners, and the acceleration rate of the rotational viscometer, could significantly alter the shape of the rheograms. A suggested methodology was identified and selected samples were analyzed in triplicate to test the reproducibility of the procedures.
Existing mathematical models do not adequately describe the variety of flow behaviour patterns observed with sewage sludge. The concepts of yield stress and apparent viscosity also have limited value due to problems of definition and calculation. A parameter termed the “instantaneous viscosity”, defined as the derivative of the flow curve, is suggested as being more suitable for describing sludge behaviour.
The relationships between chemical conditioning, particle size distribution and applied shear were explored. As polymer addition increased, the sludge particles became more susceptible to shear breakup. The extent of particle size reduction was a function of the rate of shear and the time during which the shear was maintained.
The Influence of Particle Size, Fluidization Velocity, and Fuel Type on Ash-Induced Agglomeration in Biomass Combustion