In this study, we investigate the piezoelectric characteristics of 0.55Pb(Ni1/3Nb2/3)O3-0.45Pb(Zr,Ti)O3 (PNN-PZT) with MnO2 additive (0, 0.25, 0.5, 1, 2, and 3 mol%). We focus on the fabrication of a piezoelectric ceramic for use as both actuator and sensor for ultrasound transducers. The actuator and sensor properties of a piezoelectric ceramic depend on the piezoelectric strain coefficient d and piezoelectric voltage coefficient g, related as g = d/εT. To increase g, the dielectric constant εT must be decreased. PNN-PZT with MnO2 doping is synthesized using the conventional solid-state reaction method. The electrical properties are determined based on the resonant frequencies and vibration modes measured by using an impedance analyzer. The MnO2 addition initially improves the tetragonality of the PNN-PZT ceramic, which then saturates at a MnO2 content of 1 mol%. Therefore, the dielectric constant and piezoelectric coefficient d33 steadily decrease, while the mechanical properties (Qm, Young’s modulus), tanδ, electromechanical coupling coefficient k, and piezoelectric voltage coefficient g were improved at 0.5–1 mol% MnO2 content.
Giant piezoelectric voltage coefficient in grain-oriented modified PbTiO3 material
