scholarly journals Electrochemical oxidation of ferricyanide

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mun Hon Cheah ◽  
Petko Chernev

AbstractWe report the electrochemical oxidation of ferricyanide, [FeIII(CN)6]3− and characterised the oxidation product by in-situ FTIR and XAS spectroelectrochemistry methods. Oxidation of [FeIII(CN)6]3− is proposed to proceed via a tentative Fe(IV) intermediate that undergoes reduction elimination to give cis-[FeIII(CN)4(CH3CN)2]1− as stable product in acetonitrile. Speciation of the oxidation product by DFT calculations is underpinned by good agreement to experimental data.

Author(s):  
Chencan Du ◽  
Yubin Wang ◽  
Jian Deng ◽  
Guangsheng Luo

An efficient method for the Beckmann rearrangement of cyclohexanone oxime (CHO) catalyzed by trifluoroacetic anhydride (TFAA) is proposed in this work. The effects of experimental parameters on the reaction rate are studied, including CHO concentration, TFAA/CHO ratio, temperature, and CPL concentration. The reaction rate shows a linear relationship with TFAA/CHO ratio and reduces with the increasing of CPL concentration. Based on the experimental data and the study of in-situ FTIR, a reaction mechanism is proposed and the equilibrium relationship between CPL and TFAA is established. A rate constant model is developed and is in good agreement with the experimental results. The TFAA/TFA catalytic system allows high conversion and reaction rate compared with other organic acids.


1997 ◽  
Vol 52 (4) ◽  
pp. 435-442 ◽  
Author(s):  
H.-H. Drews ◽  
W. Preetz

By reaction of [PtBr4]2- with XeF2 in dichloromethane product mixtures containing nine fluoro-chloro-, four fluoro-bromo- and 15 fluoro-chloro-bromo-platinates(IV) are formed. All complexes are detectable by in situ l9F NMR measurements. Due to the increasing trans influence F < Cl < Br, the signals <5(19F) of symmetric F-Pt-F axes observed at highest field are shifted downfield on the average by 93 ppm as compared with δ(19F•) of F••Pt-Cl′ axes, and further to lower field by 40 ppm for <5(F••) of F••-Pt-Br″ axes. For the same reason the coupling constant 1J(F••Pt) ≈ 1099 Hz is by 13.3 % smaller than 1J(F•Pt) ≈ 1268 Hz, which is by 32.3 % smaller than δ(FPt) ≈ 1873 Hz. Based on the axis method, and taking into account characteristic increments of chemical shifts depending on cis influences, the calculation of the 195Pt NMR signals of 27 observed species of the system [PtFnCl6-n-mBrm]2- n, m = 0 - 6, has been successful. The 195Pt NMR shifts of further 29 so far not detected complexes are predicted. Using parameters depending on the geometry of the complex, the 19F NMR shifts of 28 F-containing platinates(IV) have been calculated in good agreement with the experimental data. 19F resonances are predicted for 19 so far missing complexes.


Author(s):  
Li-Jing Wen ◽  
Zhuo-Ping Duan ◽  
Lian-Sheng Zhang ◽  
Zhen-Yu Zhang ◽  
Zhuo-Cheng Ou ◽  
...  

AbstractA series of shock initiation experiments are performed on the PBXC03 explosives in different formulations to understand the influence of the explosive particle size on the shock initiation, and the in-situ pressure gauge data are obtained which show that shock sensitivity decreases with the explosive particle size under the test condition used in this paper. Moreover, a mesoscopic reaction rate model which is calibrated by the experimental data on a medium formulation PBXC03 explosive is adopted and then applied to predict numerically the shock initiation of other PBXC03 explosives in different formulations. The numerical results are in good agreement with the experimental data.


2008 ◽  
Vol 622 (2) ◽  
pp. 184-192 ◽  
Author(s):  
Meiling Liu ◽  
Youyu Zhang ◽  
Yuandao Chen ◽  
Qingji Xie ◽  
Shouzhuo Yao

Author(s):  
Li-Jing Wen ◽  
Zhuo-Ping Duan ◽  
Lian-Sheng Zhang ◽  
Zhen-Yu Zhang ◽  
Zhuo-Cheng Ou ◽  
...  

AbstractA series of shock initiation experiments are performed on the PBXC03 explosives in different formulations to understand the influence of the explosive particle size on the shock initiation, and the in-situ pressure gauge data are obtained which show that shock sensitivity decreases with the explosive particle size under the test condition used in this paper. Moreover, a mesoscopic reaction rate model which is calibrated by the experimental data on a medium formulation PBXC03 explosive is adopted and then applied to predict numerically the shock initiation of other PBXC03 explosives in different formulations. The numerical results are in good agreement with the experimental data.


Sign in / Sign up

Export Citation Format

Share Document