Heterotridentate organodiphosphines in Pt(η3-P1X1P2)(Y) (X1 = B, S, or Si) and Pt(η3-P1P2Si1)(Y) derivatives-structural aspects

This review covers almost 30 Pt(II) complexes of the composition Pt(η3-P1X1P2)(Y), (X1 = BL, SL, or SiL), (Y = H, OL, NL, CL, Cl, PL, or I) and Pt(η3-P1P2Si1)(CH3). Heterotridentate ligands form six types of metallocyclic rings: P1CNB1NCP2, P1C2S1C2P2, P1C2Si1C2P2, (most common), P1CNSi1NCP2, and P1C3Si1C3P2 with common B1, S1, or Si1 atoms. In P1C2P2C3Si1 the P2 atom is common. The structural data (Pt–L, L–Pt–L) are analyzed and discussed with an attention to the distortion of a square-planar geometry about Pt(II) atoms as well as trans-influence. The sum of Pt–L(x4) bond distances growing with covalent radius of the X1 and Y atoms.

Synthesis, Properties, and Coordination Chemistry of t-Bu-Xantphos Ligands

<p>This thesis provides an account of research into a group of diphosphine ligands with a rigid xanthene backbone and tert -butyl substituents on the phosphorus atoms. The three ligands have different groups in the bridgehead position of the backbone (CMe₂, SiMe₂, or S) which change the natural (calculated) bite-angle of the ligand. The coordination chemistry of these t -Bu-xantphos ligands with late-transition metals has been investigated with a focus on metal complexes that may form in catalytic reactions. The three t -Bu-xantphos ligands were synthesised by lithiation of the backbone using sec -butyllithium/TMEDA and treatment with PtBu₂Cl. The natural biteangles of the Ph-xantphos (111.89–114.18°) and t -Bu-xantphos (126.80–127.56°) ligands were calculated using DFT. The bite-angle of the t -Bu-xantphos ligands is larger due to the increased steric bulk of the tert -butyl substituents. The electronic properties of the t -Bu-xantphos ligandswere also investigated by synthesis of their phosphine selenides. The values of ¹J PSe (689.1–698.5Hz) indicate that the t -Bu-xantphos ligands have a higher basicity than Ph-xantphos between PPh₂Me and PMe₃. The silver complexes, [Ag(t -Bu-xantphos)Cl] and [Ag(t -Bu-xantphos)]BF₄ were synthesised with the t -Bu-xantphos ligands. In contrast to systems with phenyl phosphines, all species were monomeric. [Rh(t -Bu-xantphos)Cl] complexes were synthesised, which reacted with H₂, forming [Rh(t -Bu-xantphos-ĸP,O,P ’)Cl(H)₂] complexes, and with CO, forming [Rh(t -Bu-xantphos)(CO)₂Cl] complexes. The [Rh(t -Bu-xantphos)Cl] species are air-sensitive readily forming [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)] complexes. The crystal structure of [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)], contained 15% of the dioxygen sites replaced with an oxo ligand. This is the first crystallographic evidence of a rhodium(III) oxo complex, and only the third rhodium oxo species reported. The coordination chemistry of the ligands with platinum(0) and palladium(0) showed some differences. [Pt(t -Bu-xantphos)(C₂H₄)] complexes were synthesised for all three ligands. However, reaction with [Pt(nb)₃] produced a mixture of [Pt(t -Bu-xantphos)] and [Pt(t -Bu-xantphos)(nb)] for t -Bu-sixantphos and t -Buthixantphos. Although few examples of isolable [Pt(PP)] complexes with diphosphines have been reported [Pt(t -Bu-thixantphos)] was isolated by removal of the norbornene. t -Bu-Xantphos formed small amounts of [Pt(t -Bu-xantphos)] initially, which progressed to [Pt(t -Bu-xantphos)H]X. The analogous reactions with [Pd(nb)₃] gave [Pd(t -Bu-xantphos)] and [Pd(t -Bu-xantphos)(nb)] complexes in all cases. [Pt(t -Bu-thixantphos)(C₂H₄)] and [M(t -Bu-thixantphos)] (M = Pd, Pt) react with oxygen forming [Pt(t -Bu-thixantphos)(ƞ²-O₂)], which reacts with CO to give [Pt(t -Bu-thixantphos-H-ĸ-C,P,P ’)OH] through a series of intermediates. [M(t -Bu-xantphos)Cl₂] (M = Pd, Pt) complexes were synthesised, showing exclusive trans coordination of the diphosphine ligands. The X-ray crystal structure of [Pt(t -Bu-thixantphos)Cl₂] has a bite-angle of 151.722(15)°. This is the first [PtCl₂(PP)] complex with a bite-angle between 114 and 171°. In polar solvents a chloride ligand dissociates from the [Pt(t -Bu-xantphos)Cl₂] complexes producing [Pt(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺. The analogous [Pd(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺ complexes were formed by reaction of the dichlorides complexes with NH₄PF₆. The [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ pincer complexes were the only product from reaction with [Pt(C₆H₁₀)ClMe], with the stronger trans influence of the methyl ligand promoting loss of the chloride. The formation of the pincer complexes was further explored using DFT. The values of J PtC for the methyl carbons in the [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ complexes, and J RhH for the hydride trans to the oxygen atom in the [Rh(t -Buxantphos-ĸP,O,P ’)Cl(H)₂] complexes were largest for t -Bu-sixantphos, then t -Buthixantphos, then t -Bu-xantphos. The trans influence of the t -Bu-xantphos oxygen donor follows the trend t -Bu-sixantphos < t -Bu-thixantphos < t -Bu-xantphos.</p>

Synthesis, Properties, and Coordination Chemistry of t-Bu-Xantphos Ligands

<p>This thesis provides an account of research into a group of diphosphine ligands with a rigid xanthene backbone and tert -butyl substituents on the phosphorus atoms. The three ligands have different groups in the bridgehead position of the backbone (CMe₂, SiMe₂, or S) which change the natural (calculated) bite-angle of the ligand. The coordination chemistry of these t -Bu-xantphos ligands with late-transition metals has been investigated with a focus on metal complexes that may form in catalytic reactions. The three t -Bu-xantphos ligands were synthesised by lithiation of the backbone using sec -butyllithium/TMEDA and treatment with PtBu₂Cl. The natural biteangles of the Ph-xantphos (111.89–114.18°) and t -Bu-xantphos (126.80–127.56°) ligands were calculated using DFT. The bite-angle of the t -Bu-xantphos ligands is larger due to the increased steric bulk of the tert -butyl substituents. The electronic properties of the t -Bu-xantphos ligandswere also investigated by synthesis of their phosphine selenides. The values of ¹J PSe (689.1–698.5Hz) indicate that the t -Bu-xantphos ligands have a higher basicity than Ph-xantphos between PPh₂Me and PMe₃. The silver complexes, [Ag(t -Bu-xantphos)Cl] and [Ag(t -Bu-xantphos)]BF₄ were synthesised with the t -Bu-xantphos ligands. In contrast to systems with phenyl phosphines, all species were monomeric. [Rh(t -Bu-xantphos)Cl] complexes were synthesised, which reacted with H₂, forming [Rh(t -Bu-xantphos-ĸP,O,P ’)Cl(H)₂] complexes, and with CO, forming [Rh(t -Bu-xantphos)(CO)₂Cl] complexes. The [Rh(t -Bu-xantphos)Cl] species are air-sensitive readily forming [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)] complexes. The crystal structure of [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)], contained 15% of the dioxygen sites replaced with an oxo ligand. This is the first crystallographic evidence of a rhodium(III) oxo complex, and only the third rhodium oxo species reported. The coordination chemistry of the ligands with platinum(0) and palladium(0) showed some differences. [Pt(t -Bu-xantphos)(C₂H₄)] complexes were synthesised for all three ligands. However, reaction with [Pt(nb)₃] produced a mixture of [Pt(t -Bu-xantphos)] and [Pt(t -Bu-xantphos)(nb)] for t -Bu-sixantphos and t -Buthixantphos. Although few examples of isolable [Pt(PP)] complexes with diphosphines have been reported [Pt(t -Bu-thixantphos)] was isolated by removal of the norbornene. t -Bu-Xantphos formed small amounts of [Pt(t -Bu-xantphos)] initially, which progressed to [Pt(t -Bu-xantphos)H]X. The analogous reactions with [Pd(nb)₃] gave [Pd(t -Bu-xantphos)] and [Pd(t -Bu-xantphos)(nb)] complexes in all cases. [Pt(t -Bu-thixantphos)(C₂H₄)] and [M(t -Bu-thixantphos)] (M = Pd, Pt) react with oxygen forming [Pt(t -Bu-thixantphos)(ƞ²-O₂)], which reacts with CO to give [Pt(t -Bu-thixantphos-H-ĸ-C,P,P ’)OH] through a series of intermediates. [M(t -Bu-xantphos)Cl₂] (M = Pd, Pt) complexes were synthesised, showing exclusive trans coordination of the diphosphine ligands. The X-ray crystal structure of [Pt(t -Bu-thixantphos)Cl₂] has a bite-angle of 151.722(15)°. This is the first [PtCl₂(PP)] complex with a bite-angle between 114 and 171°. In polar solvents a chloride ligand dissociates from the [Pt(t -Bu-xantphos)Cl₂] complexes producing [Pt(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺. The analogous [Pd(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺ complexes were formed by reaction of the dichlorides complexes with NH₄PF₆. The [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ pincer complexes were the only product from reaction with [Pt(C₆H₁₀)ClMe], with the stronger trans influence of the methyl ligand promoting loss of the chloride. The formation of the pincer complexes was further explored using DFT. The values of J PtC for the methyl carbons in the [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ complexes, and J RhH for the hydride trans to the oxygen atom in the [Rh(t -Buxantphos-ĸP,O,P ’)Cl(H)₂] complexes were largest for t -Bu-sixantphos, then t -Buthixantphos, then t -Bu-xantphos. The trans influence of the t -Bu-xantphos oxygen donor follows the trend t -Bu-sixantphos < t -Bu-thixantphos < t -Bu-xantphos.</p>

Trans Influence of Boryl Ligands in CO2 Hydrogenation on Ruthenium Complexes: Theoretical Prediction of Highly Active Catalysts for CO2 Reduction

In this work, we study the trans influence of boryl ligands and other commonly used non-boryl ligands in order to search for a more active catalyst than the ruthenium dihydride complex Ru(PNP)(CO)H2 for the hydrogenation of CO2. The theoretical calculation results show that only the B ligands exhibit a stronger trans influence than the hydride ligand and are along increasing order of trans influence as follows: –H < –BBr2 < –BCl2 ≈ –B(OCH)2 < –Bcat < –B(OCH2)2 ≈ –B(OH)2 < –Bpin < –B(NHCH2)2 < –B(OCH3)2 < –B(CH3)2 < –BH2. The computed activation free energy for the direct hydride addition to CO2 and the NBO analysis of the property of the Ru–H bond indicate that the activity of the hydride can be enhanced by the strong trans influence of the B ligands through the change in the Ru–H bond property. The function of the strong trans influence of B ligands is to decrease the d orbital component of Ru in the Ru–H bond. The design of a more active catalyst than the Ru(PNP)(CO)H2 complex is possible.

Fluorination Effects in XPhos Gold(I) Fluorothiolates

Gold phosphine derivatives such as thiolates have been recently proposed as catalysts or catalyst precursors. The relevance of the supramolecular environment on the fine-tuning of the catalytical activity on these compounds incentivizes the use of tools that are convenient to characterize in detail the non-covalent landscape of the systems. Herein, we show the molecular and supramolecular diversity caused by the changes in the fluorination pattern in a family of new XPhos goldfluorothiolate derivatives. Furthermore, we studied the supramolecular interactions around the Au centers using quantum chemical topology tools, in particular the quantum theory of atoms in molecules (QTAIM) and the non-covalent interaction index. Our results give detailed insights into the fluorination effects on the strength of intramolecular and intermolecular interactions in these systems. We have also used QTAIM delocalization indexes to define a novel hapticity indicator. Finally, we assessed the trans influence of the fluorothiolates on the phosphine in terms of the change in the δ 31P-NMR. These results show the feasibility of the use of fluorination in the modulation of the electronic properties of Buchwald phosphine gold(I) compounds, and thereby its potential catalytic activity.

Distortion isomers of cis-PtP2X2 and cis-PtP2XY derivatives – structural aspects

In this review, the structural parameters of distortion isomers of cis-monomeric Pt(II) coordination complexes with inner coordination spheres: Pt(PL)2X2 (X = OL, NL, SL, Br, I); Pt(PL)2(η2-X2L) (X = O2L, N2L, S2L, OSL, NSL, NSeL); Pt(η2-P2L)X2 (X = Br, I); Pt(η2-P2L)(η2-X2L) (X = O2L, OSL, NSL); Pt(η2-P2L)(NL)(Cl) and Pt(PL)(η2-P,SiL)(H) are analyzed. None of the distortion isomers with cis-configuration has a trans-partner. The distortion isomers differ mostly by the degree of distortion in the Pt-L and L-Pt-L angles. Some of the isomers also differ by crystal packing. The total mean values of Pt-P (monodentate) and Pt-P (bidentate) bond distances are 2.279 Å and 2.244 Å, respectively. The mean value of Pt-P (monodentate) (trans to H¯) of 2.320 Å is the highest one because of higher trans-influence of H¯ over PP3. The total mean values of Pt-X (trans to P) elongate quite well with the covalent radius of the X in the sequence: 1.57 Å (X = H) < 2.062 Å (O2L) < 2.095 Å (OL) < 2.108 Å (NL) < 2.154 Å (N2L) < 2.329 Å (Cl) < 2.342 Å (S2L) < 2.347 Å (SL) < 2.480 Å (Br) < 2.616 Å (I).

Platinum(IV) complexes of a bulky and exceptionally donating alkyl: 2-adamantyl

The 2-adamantyl (2-Ad) group is a particularly challenging alkyl to install on a transition metal, with the only reported 2-Ad complexes of platinum being those of Pt(II). The question of whether 2-Ad complexes with platinum in the oxidation state +IV can be made and whether they are stable is answered here. The Pt(IV) compound trans-[(bpy)PtMe2(2-Ad)I] (bpy = 2,2′-bipyridine) was synthesized via oxidative addition of iodomethane to [(COD)PtMe(2-Ad)] (COD = 1,5-cyclooctadiene) in the presence of bpy. Iodide abstraction with silver triflate (triflate anion, OTf− = CF3SO3−) produced trans-[(bpy)PtMe2(2-Ad)(OTf)]. Both complexes were unambiguously characterized by 1D NMR (1H, 13C) spectroscopy and X-ray crystallography. Both show evidence for the large steric bulk of the 2-Ad group (through the conformation of the complex adopted) and also for its exceptionally pronounced trans-influence (very long bonds to iodide/triflate trans to adamantyl). Both of the new platinum(IV) adamantyl complexes were extremely stable, even to prolonged heating.