scholarly journals Genetically-predicted prefrontal DRD4 gene expression modulates differentiated brain responses to food cues in adolescent girls and boys

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Andre K. Portella ◽  
Afroditi Papantoni ◽  
Antoneta T. Joseph ◽  
Liuyi Chen ◽  
Richard S. Lee ◽  
...  
Keyword(s):  
Gene Expression ◽  
Cognitive Control ◽  
Eating Behaviors ◽  
High Energy ◽  
High Energy Density ◽  
Sensitive Period ◽  
Food Cues ◽  
Drd4 Gene ◽  
Specific Effects ◽  
Brain Responses

AbstractThe dopamine receptor 4 (DRD4) in the prefrontal cortex (PFC) acts to modulate behaviours including cognitive control and motivation, and has been implicated in behavioral inhibition and responsivity to food cues. Adolescence is a sensitive period for the development of habitual eating behaviors and obesity risk, with potential mediation by development of the PFC. We previously found that genetic variations influencing DRD4 function or expression were associated with measures of laboratory and real-world eating behavior in girls and boys. Here we investigated brain responses to high energy–density (ED) and low-ED food cues using an fMRI task conducted in the satiated state. We used the gene-based association method PrediXcan to estimate tissue-specific DRD4 gene expression in prefrontal brain areas from individual genotypes. Among girls, those with lower vs. higher predicted prefrontal DRD4 expression showed lesser activation to high-ED and low-ED vs. non-food cues in a distributed network of regions implicated in attention and sensorimotor processing including middle frontal gyrus, and lesser activation to low-ED vs non-food cues in key regions implicated in valuation including orbitofrontal cortex and ventromedial PFC. In contrast, males with lower vs. higher predicted prefrontal DRD4 expression showed minimal differences in food cue response, namely relatively greater activation to high-ED and low-ED vs. non-food cues in the inferior parietal lobule. Our data suggest sex-specific effects of prefrontal DRD4 on brain food responsiveness in adolescence, with modulation of distributed regions relevant to cognitive control and motivation observable in female adolescents.

scholarly journals Amodal brain activation and functional connectivity in response to high-energy-density food cues in obesity

Obesity ◽  
2014 ◽  
Vol 22 (11) ◽  
pp. 2370-2378 ◽  
Author(s):  
Susan Carnell ◽  
Leora Benson ◽  
Spiro P. Pantazatos ◽  
Joy Hirsch ◽  
Allan Geliebter
Keyword(s):  
Functional Connectivity ◽  
Energy Density ◽  
Brain Activation ◽  
High Energy ◽  
High Energy Density ◽  
Food Cues

scholarly journals Contribution of the hypothalamus and gut to weight gain susceptibility and resistance in mice

2015 ◽  
Vol 225 (3) ◽  
pp. 191-204 ◽  
Author(s):  
Barbara C Fam ◽  
Rebecca Sgambellone ◽  
Zheng Ruan ◽  
Joseph Proietto ◽  
Sofianos Andrikopoulos
Keyword(s):  
Gene Expression ◽  
Adipose Tissue ◽  
Weight Gain ◽  
Resting Energy Expenditure ◽  
High Energy ◽  
High Energy Density ◽  
Adiponectin Gene ◽  
Reduced Physical Activity ◽  
Glucagon Like Peptide 1 ◽  
Susceptibility And Resistance

Obesity susceptibility in humans and in rodent strains varies in response to the consumption of high-energy density (HED) diets. However, the exact mechanism(s) involved in this susceptibility remain(s) unresolved. The aim of the present study was to gain greater insight into this susceptibility by using C57BL/6J (B6) mice that were separated into obesity-prone (diet-induced obese (DIO)) and obesity-resistant (diet-induced resistant (DR)) groups following an HED diet for 6 weeks. Physiological, biochemical and gene expression assessments of energy balance were performed in the DIO and DR mice on an HED diet and chow-fed mice. The increased weight gain of the DIO mice as compared to the DR mice was associated with increased energy intake and higher plasma leptin and adiponectin levels but not with reduced physical activity or resting energy expenditure. HypothalamicPomcgene expression was elevated, but there were no changes inNpyorAgrpexpression. Adipose tissue leptin and adiponectin gene expression were significantly reduced in the DIO group as compared to the DR group. Interestingly, ileum expression of G protein-coupled receptor (Gpr) 40 (Gpr40) was significantly increased, whereasGpr120,Gpr119,Gpr41, and glucagon-like peptide 1 (Glp1) were reduced. Contrastingly, the lower weight gain of the DR group was associated with elevated adipose tissue leptin and adiponectin gene expression, but there were no differences in plasma hormone or hypothalamic gene expression levels as compared to chow-fed mice. Therefore, the present data demonstrate that susceptibility and resistance to diet-induced weight gain in B6 mice appears to be predominantly driven by peripheral rather than hypothalamic modifications, and changes in gut-specific receptors are a potentially important contributor to this variation.

Pilot-scale combustion studies with kraft lignin in a powder burner and a CFB boiler

TAPPI Journal ◽  
2010 ◽  
Vol 9 (6) ◽  
pp. 24-30 ◽  
Author(s):  
NIKLAS BERGLIN ◽  
PER TOMANI ◽  
HASSAN SALMAN ◽  
SOLVIE HERSTAD SVÄRD ◽  
LARS-ERIK ÅMAND
Keyword(s):  
Circulating Fluidized Bed ◽  
Black Liquor ◽  
Chloride Content ◽  
Pilot Scale ◽  
High Energy ◽  
Kraft Lignin ◽  
High Energy Density ◽  
Alkali Chloride ◽  
Cfb Boiler ◽  
Solid Biofuel

Processes have been developed to produce a solid biofuel with high energy density and low ash content from kraft lignin precipitated from black liquor. Pilot-scale tests of the lignin biofuel were carried out with a 150 kW powder burner and a 12 MW circulating fluidized bed (CFB) boiler. Lignin powder could be fired in a powder burner with good combustion performance after some trimming of the air flows to reduce swirl. Lignin dried to 10% moisture content was easy to feed smoothly and had less bridging tendencies in the feeding system than did wood/bark powder. In the CFB boiler, lignin was easily handled and cofired together with bark. Although the filter cake was broken into smaller pieces and fines, the combustion was not disturbed. When cofiring lignin with bark, the sulfur emission increased compared with bark firing only, but most of the sulfur was captured by calcium in the bark ash. Conventional sulfur capture also occurred with addition of limestone to the bed. The sulfur content in the lignin had a significantly positive effect on reducing the alkali chloride content in the deposits, thus reducing the high temperature corrosion risk.

A HIGH ENERGY DENSITY ZINC/OXYGEN BATTERY SYSTEM

1966 ◽  
Author(s):  
S. CHODOSH ◽  
E. KATSOULIS ◽  
M. ROSANSKY
Keyword(s):  
Energy Density ◽  
High Energy ◽  
High Energy Density ◽  
Battery System

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Potassium Pre-Inserted K1.04Mn8O16 Cathode Materials for Aqueous Li-Ion and Na-Ion Hybrid Capacitors

2019 ◽  
Author(s):  
Yamin Zhang ◽  
Lina Chen ◽  
Chongyang Hao ◽  
Xiaowen Zheng ◽  
Yixuan Guo ◽  
...  
Keyword(s):  
Cycling Performance ◽  
High Energy ◽  
High Energy Density ◽  
Potassium Ions ◽  
Tunnel Structure ◽  
Hybrid Supercapacitor ◽  
Hybrid Supercapacitors ◽  
Li Ion ◽  
Power Densities ◽  
Hybrid Capacitors

For the applications of aqueous Li-ion hybrid capacitors and Na-ion hybrid capacitors, potassium ions are pre-inserted into MnO<sub>2</sub> tunnel structure, the as-prepared K<sub>1.04</sub>Mn<sub>8</sub>O<sub>16</sub> materials consist of <a>nanoparticles</a> and nanorods were prepared by facile high-temperature solid-state reaction. <a></a>The as-prepared materials were well studied andthey show outstanding electrochemical behavior. We assembled hybrid supercapacitors with commercial activated carbon (YEC-8A) as anode and K<sub>1.04</sub>Mn<sub>8</sub>O<sub>16 </sub>as cathode. It has high energy densities and power densities. Li-ion capacitors reach a high energy density of 127.61 Wh kg<sup>-1 </sup>at the power density of 99.86 W kg<sup>-1</sup> and Na-ion capacitor obtains 170.96 Wh kg<sup>-1 </sup>at 133.79 W kg<sup>-1</sup>. In addition, the <a>hybrid supercapacitor</a>s demonstrate excellent cycling performance which maintain 97 % capacitance retention for Li-ion capacitor and 85 % for Na-ion capacitor after 10,000 cycles.

Si Nanowire Anode Prepared by Chemical Etching for High Energy Density Lithium-ion Battery

2013 ◽  
Vol 28 (11) ◽  
pp. 1207-1212 ◽  
Author(s):  
Jian-Wen LI ◽  
Ai-Jun ZHOU ◽  
Xing-Quan LIU ◽  
Jing-Ze LI
Keyword(s):  
Energy Density ◽  
Lithium Ion Battery ◽  
Chemical Etching ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Si Nanowire
Sign in / Sign up

Export Citation Format

Share Document