scholarly journals Biosafety and efficacy evaluation of a biodegradable magnesium-based drug-eluting stent in porcine coronary artery

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jinzhou Zhu ◽  
Xiyuan Zhang ◽  
Jialin Niu ◽  
Yongjuan Shi ◽  
Zhengbin Zhu ◽  
...  

AbstractAlthough the drug-eluting stent (DES) has become the standard for percutaneous coronary intervention (PCI)-based revascularization, concerns remain regarding the use of DES, mainly due to its permanent rigid constraint to vessels. A drug-eluting bioresorbable stent (BRS) was thus developed as an alternative to DES, which can be absorbed entirely after its therapeutic period. Magnesium (Mg)-based BRSs have attracted a great deal of attention due to their suitable mechanical properties, innovative chemical features, and well-proven biocompatibility. However, the primary disadvantage of Mg-based BRSs is the rapid degradation rate, resulting in the early loss of structural support long before the recovery of vascular function. Recently, a new type of patented Mg–Nd–Zn-Zr alloy (JDBM) was developed at Shanghai Jiao Tong University to reduce the degradation rate compared to commercial Mg alloys. In the present investigation, a poly(d,l-lactic acid)-coated and rapamycin eluting (PDLLA/RAPA) JDBM BRS was prepared, and its biosafety and efficacy for coronary artery stenosis were evaluated via in vitro and in vivo experiments. The degree of smooth muscle cell adhesion to the PDLLA/RAPA coated alloy and the rapamycin pharmacokinetics of JDBM BRS were first assessed in vitro. JDBM BRS and commercial DES FIREHAWK were then implanted in the coronary arteries of a porcine model. Neointimal hyperplasia was evaluated at 30, 90, and 180 days, and re-endothelialization was evaluated at 30 days. Furthermore, Micro-CT and optical coherence tomography (OCT) analyses were performed 180 days after stent implantation to evaluate the technical feasibility, biocompatibility, and degradation characteristics of JDBM BRS in vivo. The results show the ability of a PDLLA/RAPA coated JDBM to inhibit smooth muscle cell adhesion and moderate the drug release rate of JDBM BRS in vitro. In vivo, low local and systemic risks of JDBM BRS were demonstrated in the porcine model, with preserved mechanical integrity after 6 months of implantation. We also showed that this novel BRS was associated with a similar efficacy profile compared with standard DES and high anti-restenosis performance. These findings may confer long term advantages for using this BRS over a traditional DES.

2020 ◽  
Author(s):  
Jinzhou Zhu ◽  
Xiyuan Zhang ◽  
Jialin Niu ◽  
Yongjuan Shi ◽  
Zhengbin Zhu ◽  
...  

Abstract Although drug-eluting stent (DES) has become the standard for percutaneous coronary interventions (PCI) based revascularization, stent thrombosis has emerged as a major cause of death and morbidity for those clinical commonly used permanent stents. Drug-eluting bioresorbable stent (BRS) was thus developed as an alternative to DES, which can be completely absorbed after its therapeutic period. Among them, magnesium (Mg) based BRS has attracted great attention due to its suitable mechanical properties, innovative chemical features and well-proven biocompatibility. In the present work, a Mg–Nd–Zn-Zr (JDBM) based drug-eluting BRS loaded with rapamycin was prepared, and its biosafety and efficacy for coronary artery stenosis were evaluated via in vitro and in vivo experiments. The smooth muscle cells adhesion of PDLLA/RAPA coated alloy and the rapamycin pharmacokinetics of JDBM BRS were first assessed in vitro. JDBM BRS and commercial DES Firehawk were then implanted in the coronary arteries of a porcine model. Neointimal hyperplasia was evaluated at 30, 90, and 180 days, and re-endothelialization was evaluated at 30 days. Furthermore, Micro-CT and optical coherence tomography (OCT) analysis were performed to evaluate the technical feasibility and biocompatibility of JDBM alloy based drug-eluting BRS in vivo. The results showed the inhibition ability of PDLLA/RAPA coated JDBM to smooth muscle cells adhesion and moderate drug release rate of JDBM BRS, demonstrating good anti-restenosis ability in vitro. In vivo, low local and systemic risks of JDBM alloy based BRS was demonstrated in the porcine model. We also showed that this novel BRS was associated with a comparable efficacy profile and high anti-restenosis performance. These findings may confer long term advantages for the use of this BRS over a traditional DES.


2001 ◽  
Vol 711 ◽  
Author(s):  
Derick C. Miller ◽  
Anil Thapa ◽  
Karen M. Haberstroh ◽  
Thomas J. Webster

ABSTRACTBiomaterials that successfully integrate into surrounding tissue should match not only the tissue's mechanical properties, but also the dimensions of the associated nano-structured extra-cellular matrix (ECM) components. The goal of this research was to use these ideals to develop a synthetic, nano-structured, polymeric biomaterial that has cytocompatible and mechanical behaviors similar to that of natural vascular tissue. In a novel manner, poly-lactic acid/polyglycolic acid (PLGA) (50/50 wt.% mix) and polyurethane were separately synthesized to possess a range of fiber dimensions in the micron and nanometer regime. Preliminary results indicated that decreasing fiber diameter on both PLGA and PU enhanced arterial smooth muscle cell adhesion; specifically, arterial smooth muscle cell adhesion increased 23% when PLGA fiber dimensions decreased from 500 to 50 nm and increased 76% on nano-structured, compared to conventional structured, polyurethane. However, nano-structured PLGA decreased endothelial cell adhesion by 52%, whereas adhesion of these same cells was increased by 50% on polyurethane. For these reasons, the present in vitro study provides the first evidence that polymer fiber dimensions can be used to selectively control cell functions for vascular prosthesis.


2019 ◽  
Vol 303 ◽  
pp. 151-161 ◽  
Author(s):  
Craig M. McKittrick ◽  
Sean McKee ◽  
Simon Kennedy ◽  
Keith Oldroyd ◽  
Marcus Wheel ◽  
...  

2002 ◽  
Vol 93 (4) ◽  
pp. 1296-1300 ◽  
Author(s):  
Debra J. Turner ◽  
Peter B. Noble ◽  
Matthew P. Lucas ◽  
Howard W. Mitchell

Increased smooth muscle contractility or reduced smooth muscle mechanical loads could account for the excessive airway narrowing and hyperresponsiveness seen in asthma. These mechanisms were investigated by using an allergen-induced porcine model of airway hyperresponsiveness. Airway narrowing to electric field stimulation was measured in isolated bronchial segments, over a range of transmural pressures (0–20 cmH2O). Contractile responses to ACh were measured in bronchial segments and in isolated tracheal smooth muscle strips isolated from control and test (ovalbumin sensitized and challenged) pigs. Test airways narrowed less than controls ( P < 0.0001). Test pigs showed reduced contractility to ACh, both in isolated bronchi ( P < 0.01) and smooth muscle strips ( P < 0.01). Thus isolated airways from pigs exhibiting airway hyperresponsiveness in vivo are hyporesponsive in vitro. The decreased narrowing in bronchi from hyperresponsive pigs may be related to decreased smooth muscle contractility. These data suggest that mechanisms external to the airway wall may be important to the hyperresponsive nature of sensitized lungs.


Sign in / Sign up

Export Citation Format

Share Document