Chapter 10. Interface (Cell, Gel, Surface) and Biocompatibility in Gel Processing

Author(s):  
Annalisa La Gatta ◽  
Chiara Schiraldi
2002 ◽  
Vol 126 (2) ◽  
pp. 161-165 ◽  
Author(s):  
Junying Zhang ◽  
Zhongtai Zhang ◽  
Zilong Tang ◽  
Zishan Zheng ◽  
Yuanhua Lin

2002 ◽  
Vol 17 (6) ◽  
pp. 1543-1549 ◽  
Author(s):  
S. Sathyamurthy ◽  
M. Paranthaman ◽  
T. Aytug ◽  
B. W. Kang ◽  
P. M. Martin ◽  
...  

Sol-gel processing of La2Zr2O7 (LZO) buffer layers on biaxially textured Ni–1.7% Fe–3% W alloy substrates using a continuous reel-to-reel dip-coating unit has been studied. The epitaxial LZO films obtained have a strong cube texture and uniform microstructure. The effects of increasing the annealing speed on the texture, microstructure, and carbon content retained in the film were studied. On top of the LZO films, epitaxial layers of yttria-stabilized zirconia and Ceria (CeO2) were deposited using rf sputtering, and YBa2Cu3Ox (YBCO) films were then deposited using pulsed laser deposition. Critical current densities (Jc) of 1.9 MA/cm2 at 77 K and self-field and 0.34 MA/cm2at 77 K and 0.5 T have been obtained on these films. These values are comparable to those obtained on YBCO films deposited on all-vacuum deposited buffer layers and the highest ever obtained using solution seed layers.


2002 ◽  
Vol 96 (3) ◽  
pp. 307-312 ◽  
Author(s):  
Luqian Weng ◽  
Xujin Bao ◽  
Kwesi Sagoe-Crentsil
Keyword(s):  
Sol Gel ◽  

2010 ◽  
Vol 438 ◽  
pp. 65-72 ◽  
Author(s):  
Andreas Mehner ◽  
Ju An Dong ◽  
Timo Hoja ◽  
Torsten Prenzel ◽  
Yildirim Mutlugünes ◽  
...  

The demand for high precision optical elements as micro lens arrays for displays increases continually. Economic mass production of such optical elements is done by replication with high precision optical molds. A new approach for manufacturing such molds was realized by diamond machinable and wear resistant sol-gel coatings. Crack free silica based hybrid coatings from base catalyzed sols from tetraethylorthosilicate (TEOS: Si(OC2H5)4) and methyltriethoxysilane (MTES: Si(CH3)(OC2H5)3) precursors were deposited onto pre-machined steel molds by spin coating process followed by a heat treatment at temperatures up to 800°C. Crack-free multilayer coatings with a total thickness of up to 18 µm were achieved. Micro-machining of these coatings was accomplished by high precision fly cutting with diamond tools. Molds with micro-structured coatings were successfully tested for injection molding of PMMA optical components. The wear resistance of the coatings was successfully tested by injection molding of 1000 PMMA lenses. Hardness and elastic modulus of the coatings were measured by nano indentation. The chemical composition was measured by X-ray photo electron spectroscopy (XPS) as a function of the sol-gel processing parameters.


1991 ◽  
Vol 46 (6) ◽  
pp. 783-788 ◽  
Author(s):  
Christian Egger ◽  
Ulrich Schubert

A heterogenized rhodium complex, prepared by sol-gel processing of Rh(CO)Cl[PPh2CH2CH2Si(OEt)3]2 and Si(OEt)4, is shown to catalyze the conversion of the silanes H4-nSiPh„ (n = 1 - 3) or (HMe2Si)2O to (poly)siloxanes by air or water. Using THF as a solvent, the silanoles Ph3SiOH or Ph2Si(OH)2 are obtained instead. The reaction of phenylacetic acid or acetic acid with HSiPh3 to give silyl esters is catalyzed by the same compound.


Biomaterials ◽  
2002 ◽  
Vol 23 (14) ◽  
pp. 3033-3040 ◽  
Author(s):  
Noboru Miyata ◽  
Ken-ichi Fuke ◽  
Qi Chen ◽  
Masakazu Kawashita ◽  
Tadashi Kokubo ◽  
...  

2004 ◽  
Vol 16 (4) ◽  
pp. 682-687 ◽  
Author(s):  
Dmitri A. Brevnov ◽  
Marcos Barela ◽  
Menake E. Piyasena ◽  
Gabriel P. López ◽  
Plamen B. Atanassov

2000 ◽  
Vol 265 (1-2) ◽  
pp. 61-67 ◽  
Author(s):  
Sachiko Okuzaki ◽  
Kojiro Okude ◽  
Tomoji Ohishi

Sign in / Sign up

Export Citation Format

Share Document