Interface design of carbon filler/polymer composites for electromagnetic interference shielding

2021 ◽  
Author(s):  
Runxiao Chen ◽  
Rongrong Yu ◽  
Xiaoyuan Pei ◽  
Wei Wang ◽  
Diansen Li ◽  
...  

The extensive use of electrical equipment and portable electronics has aroused major concerns about electromagnetic pollution. Carbon-based polymer composites are widely used in the electromagnetic interference (EMI) shielding field, motivated...

2015 ◽  
Vol 3 (26) ◽  
pp. 6589-6599 ◽  
Author(s):  
Mao-Sheng Cao ◽  
Xi-Xi Wang ◽  
Wen-Qiang Cao ◽  
Jie Yuan

Ultrathin graphene, a 2D material, demonstrates outstanding features and rapid growth for EMI shielding due to its strong absorption towards electromagnetic waves in composites. It is sought after for communication, electronic devices, information security, electromagnetic pollution defense and healthcare.


2020 ◽  
Vol 8 (22) ◽  
pp. 7401-7410 ◽  
Author(s):  
Biao Zhao ◽  
Ruoming Wang ◽  
Yang Li ◽  
Yumei Ren ◽  
Xiao Li ◽  
...  

The introduction of a cellular structure in conductive polymer composites is supposed to be an effective way to ameliorate the electromagnetic interference (EMI) shielding properties.


Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2856
Author(s):  
Klaudia Zeranska-Chudek ◽  
Anna Wróblewska ◽  
Sebastian Kowalczyk ◽  
Andrzej Plichta ◽  
Mariusz Zdrojek

In the age of mobile electronics and increased aerospace interest, multifunctional materials such as the polymer composites reported here are interesting alternatives to conventional materials, offering reduced cost and size of an electrical device packaging. We report a detailed study of an ecological and dual-functional polymer composite for electromagnetic interference (EMI) shielding and heat management applications. We studied a series of polylactic acid/graphene nanoplatelet composites with six graphene nanoplatelet loadings, up to 15 wt%, and three different flake lateral sizes (0.2, 5 and 25 μm). The multifunctionality of the composites is realized via high EMI shielding efficiency exceeding 40 dB per 1 mm thick sample and thermal conductivity of 1.72 W/mK at 15 wt% nanofiller loading. The EMI shielding efficiency measurements were conducted in the microwave range between 0.2 to 12 GHz, consisting of the highly relevant X-band (8–12 GHz). Additionally, we investigate the influence of the nanofiller lateral size on the studied physical properties to optimize the studied functionalities per given nanofiller loading.


Carbon ◽  
2021 ◽  
Vol 177 ◽  
pp. 304-331
Author(s):  
Rajesh Kumar ◽  
Sumanta Sahoo ◽  
Ednan Joanni ◽  
Rajesh K. Singh ◽  
Wai Kian Tan ◽  
...  

RSC Advances ◽  
2021 ◽  
Vol 11 (30) ◽  
pp. 18476-18482
Author(s):  
Licui Wang ◽  
Zhaoxin Xie ◽  
Yanhu Zhan ◽  
Xuehui Hao ◽  
Yanyan Meng ◽  
...  

It is of great significance for electromagnetic interference (EMI) shielding materials to fulfill long-lasting service requirements.


Nanoscale ◽  
2021 ◽  
Author(s):  
Bing Zhou ◽  
Qingtao Li ◽  
Penghui Xu ◽  
Yuezhan Feng ◽  
Jianmin Ma ◽  
...  

Flexible cellulose-based conductive films reveal the high potential in electromagnetic interference (EMI) shielding and thermal management applications. However, the high contact electrical/thermal resistance in these films is still one of...


2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Xinyu Wu ◽  
Tingxiang Tu ◽  
Yang Dai ◽  
Pingping Tang ◽  
Yu Zhang ◽  
...  

Highlights 3D printing of MXene frames with tunable electromagnetic interference shielding efficiency is demonstrated. Highly conductive MXene frames are reinforced by cross-linking with aluminum ions. Electromagnetic wave is visualized by electromagnetic-thermochromic MXene patterns. Abstract The highly integrated and miniaturized next-generation electronic products call for high-performance electromagnetic interference (EMI) shielding materials to assure the normal operation of their closely assembled components. However, the most current techniques are not adequate for the fabrication of shielding materials with programmable structure and controllable shielding efficiency. Herein, we demonstrate the direct ink writing of robust and highly conductive Ti3C2Tx MXene frames with customizable structures by using MXene/AlOOH inks for tunable EMI shielding and electromagnetic wave-induced thermochromism applications. The as-printed frames are reinforced by immersing in AlCl3/HCl solution to remove the electrically insulating AlOOH nanoparticles, as well as cross-link the MXene sheets and fuse the filament interfaces with aluminum ions. After freeze-drying, the resultant robust and porous MXene frames exhibit tunable EMI shielding efficiencies in the range of 25–80 dB with the highest electrical conductivity of 5323 S m−1. Furthermore, an electromagnetic wave-induced thermochromic MXene pattern is assembled by coating and curing with thermochromic polydimethylsiloxane on a printed MXene pattern, and its color can be changed from blue to red under the high-intensity electromagnetic irradiation. This work demonstrates a direct ink printing of customizable EMI frames and patterns for tuning EMI shielding efficiency and visualizing electromagnetic waves.


2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Ting Wang ◽  
Wei-Wei Kong ◽  
Wan-Cheng Yu ◽  
Jie-Feng Gao ◽  
Kun Dai ◽  
...  

Highlights The cationic waterborne polyurethanes microspheres with Diels-Alder bonds were synthesized for the first time. The electrostatic attraction not only endows the composite with segregated structure to gain high electromagnetic-interference shielding effectiveness, but also greatly enhances mechanical properties. Efficient healing property was realized under heating environment. Abstract It is still challenging for conductive polymer composite-based electromagnetic interference (EMI) shielding materials to achieve long-term stability while maintaining high EMI shielding effectiveness (EMI SE), especially undergoing external mechanical stimuli, such as scratches or large deformations. Herein, an electrostatic assembly strategy is adopted to design a healable and segregated carbon nanotube (CNT)/graphene oxide (GO)/polyurethane (PU) composite with excellent and reliable EMI SE, even bearing complex mechanical condition. The negatively charged CNT/GO hybrid is facilely adsorbed on the surface of positively charged PU microsphere to motivate formation of segregated conductive networks in CNT/GO/PU composite, establishing a high EMI SE of 52.7 dB at only 10 wt% CNT/GO loading. The Diels–Alder bonds in PU microsphere endow the CNT/GO/PU composite suffering three cutting/healing cycles with EMI SE retention up to 90%. Additionally, the electrostatic attraction between CNT/GO hybrid and PU microsphere helps to strong interfacial bonding in the composite, resulting in high tensile strength of 43.1 MPa and elongation at break of 626%. The healing efficiency of elongation at break achieves 95% when the composite endured three cutting/healing cycles. This work demonstrates a novel strategy for developing segregated EMI shielding composite with healable features and excellent mechanical performance and shows great potential in the durable and high precision electrical instruments.


Sign in / Sign up

Export Citation Format

Share Document