Transesterification of rapeseed oil and waste corn oil toward the production of biodiesel over a basic high surface area magnetic nanocatalyst: application of the response surface methodology in process optimization

The present study focused on the application of response surface methodology to optimize the fabrication of activated carbon (AC) from sugarcane bagasse for adsorption of Cu2+ ion. The AC was synthesized via chemical activation with ZnCl2 as the activating agent. The central composite design based experiments were performed to assess the individual and interactive effect of influential parameters, including activation temperature, ZnCl2 impregnation ratio and activation time on the AC yield and removal of Cu2+ ion from the aqueous environment. The statistically significant, well-fitting quadratic regression models were successfully developed as confirmed by high F- and low P-values (<0.0001), high correlation coefficients and lack-of-fit tests. Accordingly, the optimum AC yield and removal efficiency of Cu2+ were predicted, respectively, as 48.8% and 92.7% which were approximate to the actual values. By applying the predicted optimal parameters, the AC shows a surprisingly high surface area of around 1,500 m2/g accompanied by large pore volume and narrow micropore size at low fabrication temperature.

Download Full-text

High surface area mesoporous activated carbon from tomato processing solid waste by zinc chloride activation: process optimization, characterization and dyes adsorption

Journal of Cleaner Production ◽

10.1016/j.jclepro.2015.12.055 ◽

2016 ◽

Vol 113 ◽

pp. 995-1004 ◽

Cited By ~ 162

Author(s):

Hasan Sayğılı ◽

Fuat Güzel

Keyword(s):

Activated Carbon ◽

Surface Area ◽

Process Optimization ◽

Zinc Chloride ◽

High Surface ◽

High Surface Area ◽

Activation Process ◽

Mesoporous Activated Carbon ◽

Tomato Processing ◽

Dyes Adsorption

Download Full-text

Tenacious Mass Transfer Limitations Drive Catalytic Selectivity during Electrochemical Carbon Dioxide Reduction

10.26434/chemrxiv.7770338.v1 ◽

2019 ◽

Cited By ~ 1

Author(s):

Kailun Yang ◽

Recep Kas ◽

Wilson A. Smith

Keyword(s):

Surface Area ◽

High Surface ◽

High Surface Area ◽

Catalyst Layer ◽

Active Surface ◽

Active Surface Area ◽

High Concentration ◽

Copper Electrodes ◽

Surface Enhanced ◽

Local Current

This study evaluated the performance of the commonly used strong buffer electrolytes, i.e. phosphate buffers, during CO2 electroreduction in neutral pH conditions by using in-situ surface enhanced infrared absorption spectroscopy (SEIRAS). Unfortunately, the buffers break down a lot faster than anticipated which has serious implications on many studies in the literature such as selectivity and kinetic analysis of the electrocatalysts. Increasing electrolyte concentration, surprisingly, did not extend the potential window of the phosphate buffers due to dramatic increase in hydrogen evolution reaction. Even high concentration phosphate buffers (1 M) break down within the potentials (-1 V vs RHE) where hydrocarbons are formed on copper electrodes. We have extended the discussion to high surface area electrodes by evaluating electrodes composed of copper nanowires. We would like highlight that it is not possible to cope with high local current densities on these high surface area electrodes by using high buffer capacity solutions and the CO2 electrocatalysts are needed to be evaluated by casting thin nanoparticle films onto inert substrates as commonly employed in fuel cell reactions and up to now scarcely employed in CO2 electroreduction. In addition, we underscore that normalization of the electrocatalytic activity to the electrochemical active surface area is not the ultimate solution due to concentration gradient along the catalyst layer.This will “underestimate” the activity of high surface electrocatalyst and the degree of underestimation will depend on the thickness, porosity and morphology of the catalyst layer.

Download Full-text

Demulsification of a Water-in-crude Oil Emulsion with a Corn Oil BasedDemulsifier using the Response Surface Methodology: Modelling and Optimization

Recent Innovations in Chemical Engineering (Formerly Recent Patents on Chemical Engineering) ◽

10.2174/2405520414999210104154915 ◽

2021 ◽

Vol 14 ◽

Author(s):

Abed Saad ◽

Nour Abdurahman ◽

Rosli Mohd Yunus

Keyword(s):

Response Surface Methodology ◽

Crude Oil ◽

Water Content ◽

Response Surface ◽

Separation Efficiency ◽

Corn Oil ◽

Oil Emulsion ◽

Optimal Values ◽

Input Variables ◽

Oil Emulsions

: In this study, the Sany-glass test was used to evaluate the performance of a new surfactant prepared from corn oil as a demulsifier for crude oil emulsions. Central composite design (CCD), based on the response surface methodology (RSM), was used to investigate the effect of four variables, including demulsifier dosage, water content, temperature, and pH, on the efficiency of water removal from the emulsion. As well, analysis of variance was applied to examine the precision of the CCD mathematical model. The results indicate that demulsifier dose and emulsion pH are two significant parameters determining demulsification. The maximum separation efficiency of 96% was attained at an alkaline pH and with 3500 ppm demulsifier. According to the RSM analysis, the optimal values for the input variables are 40% water content, 3500 ppm demulsifier, 60 °C, and pH 8.

Download Full-text

Rugae-like FeP nanocrystal assembly on a carbon cloth: an exceptionally efficient and stable cathode for hydrogen evolution

Nanoscale ◽

10.1039/c5nr02375k ◽

2015 ◽

Vol 7 (25) ◽

pp. 10974-10981 ◽

Cited By ~ 95

Author(s):

Xiulin Yang ◽

Ang-Yu Lu ◽

Yihan Zhu ◽

Shixiong Min ◽

Mohamed Nejib Hedhili ◽

...

Keyword(s):

Gas Phase ◽

Surface Area ◽

Hydrogen Evolution ◽

Hydrogen Generation ◽

High Surface ◽

High Surface Area ◽

Catalytic Efficiency ◽

Carbon Cloth ◽

Nanocrystal Assembly

High surface area FeP nanosheets on a carbon cloth were prepared by gas phase phosphidation of electroplated FeOOH, which exhibit exceptionally high catalytic efficiency and stability for hydrogen generation.

Download Full-text