Tunable luminescence of silver-exchanged SOD zeolite thermally treated under mild conditions

Author(s):  
Xinle Tian ◽  
Qianrui Li ◽  
Decui Yao ◽  
Panlai Li ◽  
Huanrong Li ◽  
...  

Silver nanoclusters confined zeolite scaffolds have been considered as a promising luminescent material. Herein, luminescent silver nanoclusters were synthesized by incorporating Ag+ and Cs+ ions into the as-synthesized SOD zeolites...

2016 ◽  
Vol 48 (1) ◽  
pp. 101-107 ◽  
Author(s):  
Mia Omerasevic ◽  
Jovana Ruzic ◽  
Nikola Vukovic ◽  
Uros Jovanovic ◽  
Miljana Mirkovic ◽  
...  

The possibility to use natural zeolite - clinoptilolite as a host material for radioactive Cs immobilization has been investigated. Cs-exchanged form of clinoptilolite which was prepared by treatment of clinoptilolite powder with 0.25 M CsCl solution was compacted. Both, powder and powder compact of exchanged clinoptilolite were thermally treated at 1200?C. The XRPD analysis showed that Cs was successfully immobilized after heat treatment by formation of stable cesium dodecaoxo-alumopentasilicate in both, powder sample and compact. The newly formed compound showed satisfactory Cs ions retention during leaching test. The sintered compact showed somewhat better resistance to Cs leaching than the thermally treated powder. The compressive strength of sintered compact was close to 200 MPa which is more than enough for easy handling and safe storage.


1999 ◽  
Vol 560 ◽  
Author(s):  
Won Chel Choiv ◽  
Ho Nyung Lee ◽  
Yong Kim ◽  
Eun Kyu Kim

ABSTRACTAs the ultra-violet/blue luminescent material, we will introduce the thermal treated cerium oxide on silicon. It has been confirmed a violet/blue luminescence ranging from 358 rim to 450 rnm at room temperature from the thermally treated cerium-dioxide thin films on silicon. As a results of AES and HR-TEM measurement, it was confirmed that cerium silicates were generated by thermal treatment. These cerium silicates such as Ce4.667(SiO4)3O and Ce2Si2O7 are the source of the ultra-violet (UV) emission ranging from 358 nim to 450 nm (maximum at 388 rim).


2007 ◽  
Author(s):  
Fabiano Toledo ◽  
Henrique Marques ◽  
João Comasseto ◽  
Cristiano Raminelli
Keyword(s):  

2019 ◽  
Author(s):  
Raghu Nath Dhital ◽  
keigo nomura ◽  
Yoshinori Sato ◽  
Setsiri Haesuwannakij ◽  
Masahiro Ehara ◽  
...  

Carbon-Fluorine (C-F) bonds are considered the most inert organic functionality and their selective transformation under mild conditions remains challenging. Herein, we report a highly active Pt-Pd nanoalloy as a robust catalyst for the transformation of C-F bonds into C-H bonds at low temperature, a reaction that often required harsh conditions. The alloying of Pt with Pd is crucial to activate C-F bond. The reaction profile kinetics revealed that the major source of hydrogen in the defluorinated product is the alcoholic proton of 2-propanol, and the rate-determining step is the reduction of the metal upon transfer of the <i>beta</i>-H from 2-propanol. DFT calculations elucidated that the key step is the selective oxidative addition of the O-H bond of 2-propanol to a Pd center prior to C-F bond activation at a Pt site, which crucially reduces the activation energy of the C-F bond. Therefore, both Pt and Pd work independently but synergistically to promote the overall reaction


Author(s):  
Birgit Meindl ◽  
Katharina Pfennigbauer ◽  
Berthold Stöger ◽  
Martin Heeney ◽  
Florian Glöcklhofer

Anthracene derivatives have been used for a wide range of applications and many different synthetic methods for their preparation have been developed. However, despite continued synthetic efforts, introducing substituents in some positions has remained difficult. Here we present a method for the synthesis of 2,3,6,7-substituted anthracene derivatives, one of the most challenging anthracene substitution patterns to obtain. The method is exemplified by the preparation of 2,3,6,7-anthracenetetracarbonitrile and employs a newly developed, stable protected 1,2,4,5-benzenetetracarbaldehyde as the precursor. The precursor can be obtained in two scalable synthetic steps from 2,5-dibromoterephthalaldehyde and is converted into the anthracene derivative by a double intermolecular Wittig reaction under very mild conditions followed by a deprotection and intramolecular double ring-closing condensation reaction. Further modification of the precursor is expected to enable the introduction of additional substituents in other positions and may even enable the synthesis of fully substituted anthracene derivatives by the presented approach.<br>


2020 ◽  
Author(s):  
Subham Mahapatra ◽  
Cristian P. Woroch ◽  
Todd W. Butler ◽  
Sabrina N. Carneiro ◽  
Sabrina C. Kwan ◽  
...  

<p><br></p> <p>A method to activate sulfamoyl fluorides, fluorosulfates, and sulfonyl fluorides with calcium triflimide, and DABCO for SuFEx with amines is described. The reaction was applied to a diverse set of sulfamides, sulfamates, and sulfonamides at room temperature under mild conditions. Additionally, we highlight the application of this transformation to parallel medicinal chemistry to generate a broad array of nitrogen-based S(VI) compounds. </p>


2020 ◽  
Author(s):  
Subham Mahapatra ◽  
Cristian P. Woroch ◽  
Todd W. Butler ◽  
Sabrina N. Carneiro ◽  
Sabrina C. Kwan ◽  
...  

<p><br></p> <p>A method to activate sulfamoyl fluorides, fluorosulfates, and sulfonyl fluorides with calcium triflimide, and DABCO for SuFEx with amines is described. The reaction was applied to a diverse set of sulfamides, sulfamates, and sulfonamides at room temperature under mild conditions. Additionally, we highlight the application of this transformation to parallel medicinal chemistry to generate a broad array of nitrogen-based S(VI) compounds. </p>


2019 ◽  
Author(s):  
Nan An ◽  
Diana Ainembabazi ◽  
Kavya Samudrala ◽  
Christopher Reid ◽  
Kare Wilson ◽  
...  

<p>Here we report the synthesis, characterization and activity of tunable Pd-doped hydrotalcites (Pd-HTs) for the decarbonylation of furfural, hydroxymethylfurfural (HMF), aromatic and aliphatic aldehydes under microwave conditions. The decarbonylation activity reported is a notable improvement over prior heterogeneous catalysts for this process. Furfural decarbonylation is optimized in a benign solvent compatible with biomass processing - ethanol, under relatively mild conditions and short reaction times. HMF selectively affords excellent yields of furfuryl alcohol with no humin formation, but longer reaction can also afford furan via tandem alcohol dehydrogenation and decarbonylation. Yields of substituted benzaldehydes are related to calculated Mulliken charge of the carbonyl carbon. The activity and selectivity differences can be traced to loading-dependent differences in Pd speciation on the catalysts. Poisoning studies show inverse correlation between Pd loading and metal leaching: Pd-HTs with lowest Pd loading, which consist of highly dispersed and oxidized Pd species, operate heterogeneously with negligible metal leaching. Recycling experiments are consistent with this trend, offering potential for further optimization to improve robustness.</p>


2019 ◽  
Author(s):  
Katsutoshi Sato ◽  
Shin-ichiro Miyahara ◽  
Yuta Ogura ◽  
Kotoko Tsujimaru ◽  
Yuichiro Wada ◽  
...  

<p>To mitigate global problems related to energy and global warming, it is helpful to develop an ammonia synthesis process using catalysts that are highly active under mild conditions. Here we show that the ammonia synthesis activity of Ru/Ba/LaCeO<i><sub>x</sub></i> pre-reduced at 700 °C is the highest reported among oxide-supported Ru catalysts. Our results indicate that low crystalline oxygen-deficient composite oxides, which include Ba<sup>2+</sup>, Ce<sup>3+</sup> and La<sup>3+</sup>, with strong electron-donating ability, accumulate on Ru particles and thus promote N≡N bond cleavage, which is the rate determining step for ammonia synthesis.</p>


2019 ◽  
Author(s):  
Katsutoshi Sato ◽  
Shin-ichiro Miyahara ◽  
Yuta Ogura ◽  
Kotoko Tsujimaru ◽  
Yuichiro Wada ◽  
...  

<p>To mitigate global problems related to energy and global warming, it is helpful to develop an ammonia synthesis process using catalysts that are highly active under mild conditions. Here we show that the ammonia synthesis activity of Ru/Ba/LaCeO<i><sub>x</sub></i> pre-reduced at 700 °C is the highest reported among oxide-supported Ru catalysts. Our results indicate that low crystalline oxygen-deficient composite oxides, which include Ba<sup>2+</sup>, Ce<sup>3+</sup> and La<sup>3+</sup>, with strong electron-donating ability, accumulate on Ru particles and thus promote N≡N bond cleavage, which is the rate determining step for ammonia synthesis.</p>


Sign in / Sign up

Export Citation Format

Share Document