Developing a low-cost bluetooth assisted hearing aid

Author(s):  
S. Ailani ◽  
Y. Handa ◽  
A. Ganguli ◽  
G. Rohilla
Keyword(s):  
PLoS ONE ◽  
2020 ◽  
Vol 15 (9) ◽  
pp. e0238922
Author(s):  
Soham Sinha ◽  
Urvaksh D. Irani ◽  
Vinaya Manchaiah ◽  
M. Saad Bhamla

2019 ◽  
Vol 23 ◽  
pp. 233121651985830 ◽  
Author(s):  
Ibrahim Almufarrij ◽  
Kevin J. Munro ◽  
Piers Dawes ◽  
Michael A. Stone ◽  
Harvey Dillon

Direct-to-consumer (DTC) hearing devices can be purchased without consulting a hearing health professional. This project aims to compare 28 DTC devices with the most popular hearing aid supplied by the U.K. National Health Service (NHS). The comparison was based on technical performance, cosmetic acceptability, and the ability to match commonly used gain and slope targets. Electroacoustic performance was evaluated in a 2-cc coupler. Match to prescription target for both gain and slope was measured on a Knowles Electronic Manikin for Acoustic Research using a mild and also a moderate sloping hearing loss. Using an online blinded paired comparison of each DTC and the NHS reference device, 126 participants (50 were hearing aid users and 76 were nonhearing aid users) assessed the cosmetic appearance and rated their willingness-to-wear the DTC devices. The results revealed that higher purchase prices were generally associated with a better match to prescribed gain–frequency response shapes, lower distortion, wider bandwidth, better cosmetic acceptability, and higher willingness-to-wear. On every parameter measured, there were devices that performed worse than the NHS device. Most of the devices were rated lower in terms of aesthetic design than the NHS device and provided gain–frequency responses and maximum output levels that were markedly different from those prescribed for commonly encountered audiograms. Because of the absence or inflexibility of most of the devices, they have the potential to deliver poor sound quality and uncomfortably loud sounds. The challenge for manufacturers is to develop low-cost products with cosmetic appeal and appropriate electroacoustic characteristics.


2017 ◽  
Vol 28 (02) ◽  
pp. 109-118 ◽  
Author(s):  
Elizabeth Convery ◽  
Gitte Keidser ◽  
Mark Seeto ◽  
Margot McLelland

Background: Hearing aids and personal sound amplification products that are designed to be self-fitted by the user at home are becoming increasingly available in the online marketplace. While these devices are often marketed as a low-cost alternative to traditional hearing health-care, little is known about people’s ability to successfully use and manage them. Previous research into the individual components of a simulated self-fitting procedure has been undertaken, but no study has evaluated performance of the procedure as a whole using a commercial product. Purpose: To evaluate the ability of a group of adults with a hearing loss to set up a pair of commercially available self-fitting hearing aids for their own use and to investigate factors associated with a successful outcome. Research Design: An interventional study that used regression analysis to identify potential contributors to the outcome. Study Sample: Forty adults with mild to moderately severe hearing loss participated in the study: 20 current hearing aid users (the “experienced” group) and 20 with no previous amplification experience (the “new” group). Twenty-four participants attended with partners, who were present to offer assistance with the study task as needed. Data Collection and Analysis: Participants followed a set of written, illustrated instructions to perform a multistep self-fitting procedure with a commercially available self-fitting hearing aid, with optional assistance from a lay partner. Standardized measures of cognitive function, health literacy, locus of control, hearing aid self-efficacy, and manual dexterity were collected. Statistical analysis was performed to examine the proportion of participants in each group who successfully performed the self-fitting procedure, factors that predicted successful completion of the task, and the contributions of partners to the outcome. Results: Fifty-five percent of participants were able to successfully perform the self-fitting procedure. Although the same success rate was observed for both experienced and new participants, the majority of the errors relating to the hearing test and the fine-tuning tasks were made by the experienced participants, while all of the errors associated with physically customizing the hearing aids and most of the insertion errors were made by the new participants. Although the majority of partners assisted in the self-fitting task, their contributions did not significantly influence the outcome. Further, no characteristic or combination of characteristics reliably predicted which participants would be successful at the self-fitting task. Conclusions: Although the majority of participants were able to complete the self-fitting task without error, the provision of knowledgeable support by trained personnel, rather than a fellow layperson, would most certainly increase the proportion of users who are able to achieve success. Refinements to the instructions and the physical design of the hearing aid may also serve to improve the success rate. Further evaluation of the range of self-fitting hearing aids that are now on the market should be undertaken.


2005 ◽  
Vol 3 (2) ◽  
pp. 76-81 ◽  
Author(s):  
Agnete Parving ◽  
Birger Christensen ◽  
Jorgen Nielsen ◽  
Konrád Konrádsson

Author(s):  
Dr. Anita Pati

Abstract: Now a days there are many people affected by hearing loss that make them disabled as they cannot communicate properly .The main complaint of people with hearing loss is low ability to deduce speech in a noisy environment. Hearing aid is a delicate instrument, which can acquire, process and feedback realistic signal in real time. In this matter various apparent opposition matching algorithm, various filtering methods, digital signal processing algorithm and echo cancellation are developed and implemented. The purpose of this object is to develop the digital signal processing based platform for digital hearing aid technique, which is for the people with hearing impairment using the low cost fuzzy orange pi model. To Perform this Application fuzzy algorithm is used which is quite easy to implement and required less operative computation. The algorithms are performed using MATLAB language which gives the best clarity and simulated functionality over MATLAB. Keywords: Speech Recognition, Noise Reduction, SNR, Fuzzy Masking Technique


2012 ◽  
Vol 18 (1) ◽  
pp. 36-41
Author(s):  
Nachiketa Rout ◽  
Sudip Paul ◽  
PG Waghmare ◽  
R Patnaik

Aim: The aim was to develop a low cost multi use body level hearing aid (HA) targeting the Asian population.Method: The study began with need identification. In this stage the researcher wanted to identify the changes which the parents and professionals thought would improve the functionality of the present say body level hearing aids. A survey of 106 hearing aid users, parents and professionals was done. All had been exposed to hearing aids since five years or more. They were asked to name one change which can be incorporated into the present day HA aids to increase its functionality and utility. Six major changes were significantly (pd” 0.05) recommended. The changes were considered to develop a prototype which was then field tested for its efficacy.Results: the six changes which were identified by the 106 participants included incorporating better cords, better battery backup, easy repair facilities, low battery indicator, torch facilities along with a vibrating alert. A prototype was developed at a very low cost of 936 rupee with facilities of a strong class HA, vibrating doorbell alert, rechargeable battery, torch light and a vibrating doorbell alert and a low battery indicator. It was found to function satisfactorily and won the prestigious Sushrut Innovation award by the Department of Science and Technology, India for year 2011.Conclusions: the developed prototype can be considered for large scale production. It would bring down the cost of the prototype and beneficiaries would get an advantage of assistive devices along with the hearing aid. DOI: http://dx.doi.org/10.3329/bjo.v18i1.10412Bangladesh J Otorhinolaryngol 2012; 18(1): 36-41


2019 ◽  
Author(s):  
Soham Sinha ◽  
Urvaksh D. Irani ◽  
Vinaya Manchaiah ◽  
M. Saad Bhamla

Hearing Aids have dominated the audiological market for decades. While the costs of the electronic components have reduced substantially, the cost of a hearing aid has risen steadily to the point that it has become unaffordable for the vast majority of the population with Age Related Hearing Loss (ARHL). Here, we present an ultra-low-cost, affordable and accessible hearing aid device (‘LoCHAid’), specifically targeted for ARHL in elderly patients. The LoCHAid costs only 98 cents (< $1) to mass manufacture and can be personalized for each user through a 3D-printable case. It is designed to be an over-the-counter (OTC) self-serviceable solution for elderly individuals with ARHL. Electroacoustic measurements show that the device meets most of the targets set out by the WHO Preferred Product Profile and Consumer Technology Association for Hearing Aids. The frequency response of the hearing aid shows selectable gain in the range of 4-8 kHz, and mild to moderate gain between 200-1000 Hz, and shows very limited total distortion (1%). Simulated gain measurements show that the LoCHAid is well fitted to a range of ARHL profiles for males and females between the ages of 60-79 years. Overall, the measurements show that the device has the potential to benefit individuals with ARHL. Thus, our proposed design addresses a long-standing and grand challenge of affordable and accessible hearing technology for every elderly person on this planet.


2004 ◽  
Vol 124 (4) ◽  
pp. 416-420 ◽  
Author(s):  
A. Parving ◽  
B. Christensen

Sign in / Sign up

Export Citation Format

Share Document