Dual Band Dual Mode Low Cross-Polarization Slot-Patch Antenna Fed by Microstrip Line

Author(s):  
Yifan Yin ◽  
Ke Wu
2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Xiao-Lan Zhao ◽  
Quan Wei Lin

This paper presents a dual-band patch antenna loaded with face-to-face U-shaped slots fed by a substrate-integrated meandering probe (SIM-probe). With the presence of U-shaped slots, two current paths are formed, which leads to the resonance modes at 2.4 and 3.65 GHz on the patch. The SIM-probe suppresses the unwanted cross-polarization radiations by providing out-of-phase vertical currents from vertical metallic vias. To verify our work, a prototype was fabricated and tested. The proposed antenna achieves the impedance bandwidths of 9.4% and 9% from the frequency range of 2.34–2.57 GHz and 3.5–3.83 GHz (for the reflection coefficient ≤ −10 dB) and obtains average gains of 5.8 dBi and 6.8 dBi at both bands. The cross-polarization level is below −20 dB. Measured results agree well with the simulation.


2016 ◽  
Vol 15 ◽  
pp. 348-351 ◽  
Author(s):  
Jinpil Tak ◽  
Seungmin Woo ◽  
Jaekwang Kwon ◽  
Jaehoon Choi
Keyword(s):  

Author(s):  
Nur Azura Shamsudin ◽  
◽  
Shaharil Mohd Shah ◽  

This work presents the performance of a miniaturized dual-band dual-mode microstrip patch antenna with Defected Ground Structure (DGS) at 2.45 GHz and 5.8 GHz on the stacked substrate configuration in the order of FR-4 – PDMS- FR-4. The antenna offers a promising solution for wearable applications in the ISM bands. The first substrate is a flexible Flame Retardant 4 (FR-4) and the other substrate is a highly flexible Polydimethyl Siloxane (PDMS). The size of the antenna was reduced from 50 × 50 mm2 to 30 × 30 mm2, by introducing DGS on the ground plane. A single U-slot on the rectangular radiating patch was introduced to produce the upper resonant frequency of 5.8 GHz while the existing square patch is to generate the lower resonant frequency of 2.45 GHz. The simulations on the dual-band dual-mode microstrip patch antenna shows the reflection coefficient, S11 at 2.45 GHz is -17.848 dB with a bandwidth of 278.8 MHz and -13.779 dB with a bandwidth of 273 MHz at 5.8 GHz. A unidirectional radiation pattern observed in the E-plane shows that the antenna could be applied for off-body communication while an omnidirectional radiation pattern in the H-plane showed that the antenna can be used for on-body communication. Bending investigation were performed for the antenna over a vacuum cylinder with varying diameters of 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm and 120 mm in the CST MWS® software. From the graph of reflection coefficients, the performance of the antenna were not affected in bending condition. The SAR simulations showed that the SAR limits obey the guidelines as stipulated by the Federal Communication Commission (FCC) and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) for 1 mW of input power. The 2.45 GHz SAR limit for 1 g of human tissue is 0.09007 W/kg (FCC standard: < 1.6 W/kg) while for 10 g is 0.01867 W/kg (ICNIRP standard: < 2 W/kg). For 5.8 GHz, the SAR limit for 1 g of human tissue is 0.115 W/kg and for 10 g is 0.03517 W/kg. Based on the performance of the antenna in bending condition and the SAR limits, it is safe to conclude that the antenna can be used for wearable applications at 2.45 GHz and 5.8 GHz of the ISM bands.


Double Fibonacci spiral in a circle with microstrip line feeding technique is designed in the frequency range from 0.1GHz to 6GHz. The antenna is designed and simulated in computer simulation technology microwave studio software, substrate Fr-4 with thickness 1.59mm is used and antenna parameters such as return loss, surface current, E-field, H-field and gain are calculated for Double Fibonacci spiral microstrip patch (DFSM) antenna. The antenna is used for ISM (industrial, scientific and medical) frequency band (2.45GHz) and a new unutilized band for next generation services, gain is 2.22dB and 3.16dB and bandwidth is 25.94% and 22.83% on resonating frequencies.


Sign in / Sign up

Export Citation Format

Share Document