The Operating Environment Substitution-based Field Test Technology of UHVDC Protection System: Part 1 Test Scheme and Hardware Environment Substitution

Author(s):  
Xiangping Kong ◽  
Juan Li ◽  
Wenzhe Mei ◽  
Chi Zhang
1999 ◽  
Vol 42 (3) ◽  
pp. 267-280
Author(s):  
U. Müller ◽  
K. Strittmatter ◽  
G. Nitter

Abstract. Title of the paper: Alternative selection strategies for the Mutton Merino breed to optimize breedine Systems This paper deals with the investigation of alternative selection strategies for the Mutton Merino breed to improve lamb meat production and fertility. A main topic is the application of ultrasonic scanning to evaluate the meat content on live animals. The aim of model calculations was the optimisation and comparison of five different selection strategies within three different schemes of gene dissimation. First a basic scheme was defined and optimised (selection on field records, one-step selection, no scanning). It was regarded as the reference scheme to which all other breeding Systems were related. The following schemes considered both, selection with and without scanning. A second scheme, also based on field records, includes two-step selection of rams (called improved field test scheme). In a third and fourth scheme a level of uniform environment was assumed for ram progeny testing. These are a central testing Station on the one hand with slaughtering and carcass evaluation on progeny, and one or more contract farms on the other (without slaughtering). For a fifth selection scheme an open nucleus was assumed with ram progeny testing in associated test herds. In a dcterministic approach using the ZPLAN Computer program, the monetary genetic gain for the breeding objeetive (traits lambs weaned, litter weight at weaning, postweaning daily gain and lean meat content) and the profit were calculated for each scheme after optimisation of various biological-technical coefficients. The highest profit was achieved with a nucleus scheme (DM 9,16). Due to low recording costs the basic scheme was second (DM 7,19) and, because of high costs, the Station scheme was last (DM 4,22). The other two schemes were intermediate (DM 6,98 for the scheme with contract farms and DM 6,58 for the improved field test scheme). On an average over all schemes, scanning resulted in a 0,24 DM (i.e. almost 30 per cent) increase of the monetary genetic gain and a threefold higher genetic gain for lean meat percentage. In all schemes scanning lead also to a higher profit because the higher retum of selection based on scanning exceeded the higher costs.


2014 ◽  
Vol 556-562 ◽  
pp. 228-231
Author(s):  
Da Jing Fang ◽  
Jun Huang ◽  
Ya Ping Wang ◽  
Er Bu Shen ◽  
Shun Kai Li ◽  
...  

In this paper, the sacrificial anode protection system for steel pile of Tripoli wharf (Lebanon) was studied. Optimal average protection current densities were selected for steel pipe/sheet pile of seaside zone back filled zone and sea mud zone. Based on field test and investigation, we found that the optimal average protection current density for seaside zone is 0.060 A/m2, back filled zone 0.030 A/m2 and sea mud zone 0.025 A/m2, respectively.


2013 ◽  
Vol 785-786 ◽  
pp. 1248-1252
Author(s):  
Xiao Bin Li ◽  
Meng Yan ◽  
Qu Yu ◽  
Xiang Lin Zeng

In order to get a full understanding the whole bridge's actual stress state and dynamic performance as well as to check whether the bridge structure could meet the requirements of carrying capacity and traffic capacity, loading test has been carried out to the Nanxi Yangtze River Bridge. As the bridge is a long-span suspension bridge, there is a significant geometric non-linear effect which must be considered in the calculation. Besides, a reasonable field test organization scheme is necessary to guarantee the success of the test since there are a variety of working conditions and a large number of loading trucks. Finally, this kind of static and dynamic load test has a high guiding significance to the field test.


Author(s):  
Tobial Koal ◽  
Rene Kothe ◽  
Heinrich Theodor Vierhaus

Testing complex systems on a chip (SoCs) with up to billions of transistors has been a challenge to IC test technology for more than a decade. Most of the research work in IC test technology has focused on problems of production testing, while the problem of self test in the field of application has found much less attention. With SoCs being used also in long-living systems for safety critical applications, such enhanced self test capabilities become essential for the dependability of the host system. For example, automotive electronic systems must be capable of performing a fast and effective start-up self test. For future self-repairing systems, fault diagnosis will become necessary, since it is the base for dedicated system re-configuration. One way to solve this problem is a hierarchical self-test scheme for embedded SoCs, based on hardware and software. The core of the test architecture then is a test processor device, which is optimised to organize and control test functions efficiently and at minimum cost. This device must be highly reliable by itself. The chapter introduces the basic concept of hierarchical HW / SW based self test, the test processor concept and architecture, and its role in a hierarchical self test scheme for SoCs.


2013 ◽  
Vol 694-697 ◽  
pp. 2040-2043
Author(s):  
Wei Yi Chen ◽  
Qi Xie ◽  
Yun Luo

Based on the test scheme and principle of armoured vehicle fire control system, proposes electrical measurement method unite gyros method to test armoured vehicle fire control system; Established the processing model of gun drifting, stability accuracy, gun transfer speed, intergrade quality; according to the gyros drifting problem, proposes drift trend arithmetic to enhancing the accuracy of measuring system.


Author(s):  
Qingwen Han ◽  
Xiaohan Yuan ◽  
Lingqiu Zeng ◽  
Hui Zu ◽  
Lei Ye ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document