Reconfigurable dual-band antenna with high frequency ratio (1.6:1) using MEMS switches

2008 ◽  
Vol 44 (2) ◽  
pp. 76 ◽  
Author(s):  
C.W. Jung ◽  
M.-J. Lee ◽  
F. De Flaviis
IEEE Access ◽  
2018 ◽  
Vol 6 ◽  
pp. 12710-12717 ◽  
Author(s):  
Zheng Zhuang ◽  
Yongle Wu ◽  
Mengdan Kong ◽  
Weimin Wang ◽  
Yuanan Liu

Sensors ◽  
2019 ◽  
Vol 19 (7) ◽  
pp. 1732 ◽  
Author(s):  
Mohammad Haerinia ◽  
Sima Noghanian

In this work, a dual-band printed planar antenna, operating at two ultra-high frequency bands (2.5 GHz/4.5 GHz), is proposed for wireless power transfer for wearable applications. The receiving antenna is printed on a Kapton polyimide-based flexible substrate, and the transmitting antenna is on FR-4 substrate. The receiver antenna occupies 2.1 cm 2 area. Antennas were simulated using ANSYS HFSS software and the simulation results are compared with the measurement results.


IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 29132-29139
Author(s):  
Jian-Xin Chen ◽  
Shuai-Hua Cao ◽  
Xue-Feng Zhang

Author(s):  
Miaomiao Zuo ◽  
Jian Ren ◽  
Rongxu Hou ◽  
Xiaoyu Du ◽  
Zhe Chen ◽  
...  

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Caixia Feng ◽  
Yongqiang Kang ◽  
Lijuan Dong ◽  
Lihong Wang

This paper presents a dual-band step impedance resonator (SIR) antenna based on metamaterial-inspired periodic structure of coupled complementary split-ring resonators substrate-integrated waveguide (CSRR-SIW). The antenna supports wireless local area networks (WLAN) bands at 2.4/5.2/5.8 GHz. The CSRRs and two branches of the SIR element are etched on the top and bottom metal surfaces of the substrate. The SIR element produces a fundamental frequency f1 at 2.4 GHz and a second harmonic frequency fs2 at 5.7 GHz. Meanwhile, the CSRRs produces a resonant frequency at high-frequency band around 5.2 GHz, which can be combined with the second harmonic frequency fs2 at 5.7 GHz. The high-frequency bandwidth can then be broadened. The simulated and measured results show that the dual operation bands with bandwidths of 16% from 2.25 GHz to 2.64 GHz and 18.2% from 5 GHz to 6 GHz for |S11| < −10 dB are achieved. Meanwhile, the proposed antenna has peak gains ranging from 6.5 dBi to 7 dBi and from 7 dBi to 7.7 dBi in the lower and upper bands, respectively. Compared with many previously reported dual-band antenna designs, the proposed antenna achieves comparable bandwidth performance and larger gain per unit area with a relatively smaller size. Moreover, the simple structure renders the proposed antenna has the advantage of easy-processable and cost-effective implementation.


Sign in / Sign up

Export Citation Format

Share Document