scholarly journals Analysis, design, and implementation of an improved gate driver forhigh switching frequency EV application

2020 ◽  
Vol 13 (9) ◽  
pp. 1797-1806 ◽  
Author(s):  
Pavan Singh Tomar ◽  
N Sandeep ◽  
Arun Kumar Verma ◽  
Manaswi Srivastava
Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2449
Author(s):  
Hongyan Zhao ◽  
Jiangui Chen ◽  
Yan Li ◽  
Fei Lin

Compared with a silicon MOSFET device, the SiC MOSFET has many benefits, such as higher breakdown voltage, faster action speed and better thermal conductivity. These advantages enable the SiC MOSFET to operate at higher switching frequencies, while, as the switching frequency increases, the turn-on loss accounts for most of the loss. This characteristic severely limits the applications of the SiC MOSFET at higher switching frequencies. Accordingly, an SRD-type drive circuit for a SiC MOSFET is proposed in this paper. The proposed SRD-type drive circuit can suppress the turn-on oscillation of a non-Kelvin packaged SiC MOSFET to ensure that the SiC MOSFET can work at a faster turn-on speed with a lower turn-on loss. In this paper, the basic principle of the proposed SRD-type drive circuit is analyzed, and a double pulse platform is established. For the purpose of proof-testing the performance of the presented SRD-type drive circuit, comparisons and experimental verifications between the traditional gate driver and the proposed SRD-type drive circuit were conducted. Our experimental results finally demonstrate the feasibility and effectiveness of the proposed SRD-type drive circuit.


2011 ◽  
Vol 679-680 ◽  
pp. 649-652 ◽  
Author(s):  
Jang Kwon Lim ◽  
Georg Tolstoy ◽  
Dimosthenis Peftitsis ◽  
Jacek Rabkowski ◽  
Mietek Bakowski ◽  
...  

The 1.2 kV SiC JFET and BJT devices have been investigated and compared with respect to total losses including the gate driver losses in a DC-DC converter configuration. The buried grid, Normally-on JFET devices with threshold voltage of -50 V and -10V are compared to BJT devices with ideal semiconductor and passivating insulator interface and an interface with surface recombination velocity of 4.5•104 cm/s yielding agreement to the reported experimental current gain values. The conduction losses of both types of devices are independent of the switching frequency while the switching losses are proportional to the switching frequency. The driver losses are proportional to the switching frequency in the JFET case but to a large extent independent of the switching frequency in the BJT case. The passivation of the emitter junction modeled here by surface recombination velocity has a significant impact on conduction losses and gate driver losses in the investigated BJT devices.


OOIS’96 ◽  
1997 ◽  
pp. 243-263 ◽  
Author(s):  
Bent Bruun Kristensen ◽  
Johnny Olsson

Sign in / Sign up

Export Citation Format

Share Document