scholarly journals Direction finding and beamforming using cylindrical array of dipole antennas in the presence of cylindrical scatterer/reflector including the mutual coupling effect

2021 ◽  
Vol 15 (5) ◽  
pp. 521-528
Author(s):  
Sarah Poormohammad ◽  
Forouhar Farzaneh ◽  
Ali Banai
Electronics ◽  
2018 ◽  
Vol 7 (12) ◽  
pp. 426 ◽  
Author(s):  
Peng Chen  ◽  
Zhimin Chen ◽  
Xuan Zhang ◽  
Linxi Liu

The imperfect array degrades the direction finding performance. In this paper, we investigate the direction finding problem in uniform linear array (ULA) system with unknown mutual coupling effect between antennas. By exploiting the target sparsity in the spatial domain, the sparse Bayesian learning (SBL)-based model is proposed and converts the direction finding problem into a sparse reconstruction problem. In the sparse-based model, the off-grid errors are introduced by discretizing the direction area into grids. Therefore, an off-grid SBL model with mutual coupling vector is proposed to overcome both the mutual coupling and the off-grid effect. With the distribution assumptions of unknown parameters including the noise variance, the off-grid vector, the received signals and the mutual coupling vector, a novel direction finding method based on SBL with unknown mutual coupling effect named DFSMC is proposed, where an expectation-maximum (EM)-based step is adopted by deriving the estimation expressions for all the unknown parameters theoretically. Simulation results show that the proposed DFSMC method can outperform state-of-the-art direction finding methods significantly in the array system with unknown mutual coupling effect.


2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Jie Xu ◽  
Wenbin Dou

A broadband planar phased array consisting of 22 linear printed dipole antennas (PDA) is presented in this paper. The element is designed by a coax probe feeding mechanism with a ground plate configuration. The PDA with two arms placed on both sides of a substrate is realized. The inner conductor of the coaxial cable is connected to the PDA’s upper arm, and the outer conductor is connected to the PDA’s lower arm, so it eliminates the balun. The impedance bandwidth of the PDA array can be improved by increasing mutual coupling effect between the adjacent array elements. A dielectric layer, which is integrated on the surface of the antenna, is designed and fabricated to improve the impedance bandwidth and to shield the array. The measured results indicate the active VSWR is less than 3 over the frequency range of 4–20 GHz.


2016 ◽  
Vol 15 ◽  
pp. 1301-1304 ◽  
Author(s):  
J. H. Kim ◽  
S. I. Cho ◽  
H.-J. Kim ◽  
J.-W. Choi ◽  
J. E. Jang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document