scholarly journals An experimental study on heat transfer performance of a pulsating heat pipe radiator for CPU heat dissipation

2020 ◽  
Vol 165 ◽  
pp. 06035
Author(s):  
Fumin Shang ◽  
Qingjing Yang ◽  
Chaoyue Liu ◽  
Shilong Fan ◽  
Jianhong Liu
Keyword(s):  
Heat Transfer ◽  
Temperature Distribution ◽  
Surface Temperature ◽  
Heat Pipe ◽  
Heat Dissipation ◽  
Heat Transfer Performance ◽  
High Heat ◽  
Transfer Performance ◽  
Pulsating Heat Pipe ◽  
Surface Temperature Distribution

To meet the requirement of electronic heat dissipation with high heat flux, a kind of heat dissipation device using pulsating heat pipe (PHP) for CPU heat dissipation was put forward. The heat transfer performance and surface temperature distribution of the radiator are analyzed by analyzing the wall temperature distribution and the distribution of the evaporator and condenser of the PHP. The experimental results show that the change of wind speed has obvious influence on the operation of the PHP radiator. The surface temperature distribution of the PHP radiator is very uniform, which is especially beneficial for CPU cooling. The heat transfer performance of the PHP is better, and the minimum average thermal resistance is 0.19 k/W. In addition, there is no drying phenomenon when the temperature reaches about 120 °C, which indicates that the pulsating heat pipe has a very high heat transfer limit.

scholarly journals Experimental study on heat transfer performance of gas-liquid pulsating heat pipe heat exchanger

2020 ◽  
Vol 165 ◽  
pp. 06048
Author(s):  
Fumin Shang ◽  
Chaoyue Liu ◽  
Qingjing Yang ◽  
Yifang Dong ◽  
Weijia Cao ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Heat Pipe ◽  
Heat Dissipation ◽  
Heat Transfer Performance ◽  
Waste Heat ◽  
Transfer Performance ◽  
Pulsating Heat Pipe ◽  
Heat Exchange Equipment ◽  
Pipe Heat

With the continuous development of industrial technology, the safety and efficiency of thermal equipment work in related industries and industrial fields are facing many problems. First, with the improvement of integrated level, the size of electronic components is getting smaller and smaller, and the heat load per unit area is increasing, which makes the traditional heat dissipation method difficult to meet the requirements; second, with the increase of energy-saving pressure, the temperature difference of low-temperature waste heat recovery is reduced, and the traditional heat exchange equipment is difficult to meet the working requirements. The pulsating heat pipe has the characteristics of small volume and excellent heat transfer performance. In view of the heat transfer performance of the pulsating heat pipe, we designed the gas-liquid pulsating heat pipe heat exchanger and studied its heat transfer performance, which has been verified to be effective.

Experimental Study on Heat Transfer Performance of Pulsating Heat Pipe CPU Radiator

2019 ◽  
Author(s):  
Fu-Min Shang ◽  
Qing-Jing Yang ◽  
Jian-Hong Liu
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Wall Temperature ◽  
Heat Sink ◽  
Heat Dissipation ◽  
Heat Transfer Performance ◽  
Structural Characteristics ◽  
Hot Water ◽  
Transfer Performance ◽  
Pulsating Heat Pipe

Abstract According to the characteristics of heat dissipation process and the structural characteristics of traditional heat dissipation device, pulsating heat pipe (PHP) and traditional The pin-finned heat sink are used to simulate the cooling process of CPU, so as to meet the cooling requirements of computer CPU. By comparing the heat transfer perform of the two heat sinks under three conditions: the top wall temperature of the heat sink, the wall temperature of the heat sink and the temperature difference between the inlet and outlet of hot water, it can be found that the heat transfer performance of the PHP radiator is better. The experimental results show that in order to further improve the heat dissipation performance of the computer CPU, the CPU radiator device can be manufactured by the PHP device, and the PHP technology has broad application prospects in electronic heat dissipation.

Experimental Study on Heat Pipe Radiator in Cooling Electronic Apparatus

2012 ◽  
Vol 197 ◽  
pp. 216-220
Author(s):  
Zhong Chao Zhao ◽  
Rui Ye ◽  
Gen Ming Zhou
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Heat Pipe ◽  
Heat Dissipation ◽  
Heat Transfer Performance ◽  
Electronic Device ◽  
Transfer Performance ◽  
Air Velocity ◽  
Electronic Apparatus ◽  
Operational Temperature

To solve the cooling problem in modern electronic device, a kind of heat pipe radiator was designed and manufactured in this paper. The heat transfer performance of heat pipe radiator and its relationship with air velocity were investigated by experimental method. The experimental results show that the heat pipe radiator can meet the temperature requirement of electronic device with the power range from 40W to 160W. To keep the operational temperature of electronic device with power of 160W under 75°C，the air velocity should be keep at 1.7m/s. The heat dissipation performance of heat pipe radiator was enhanced with the air velocity increased from 0.2m/s to 1.7m/s.for the electronic equipment with power of 160W.

Working Fluid Inventory Effect on Heat Transfer Performance of a Grooved Micro Heat Pipe

2013 ◽  
Vol 589-590 ◽  
pp. 559-564
Author(s):  
Xi Bing Li ◽  
Yun Shi Ma ◽  
Xun Wang ◽  
Ming Li
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Pipe ◽  
Heat Transfer Performance ◽  
Mathematic Model ◽  
High Heat ◽  
Working Fluid ◽  
High Heat Flux ◽  
Transfer Performance ◽  
Flux Concentration

As a highly efficient heat transfer component, a micro heat pipe (MHP) has been widely applied to the situations with high heat flux concentration. However, a MHPs heat transfer performance is affected by many factors, among which, working fluid inventory has great influence on the security, reliability and frost resistance of its heat transfer performance. In order to determine the appropriate working fluid inventory for grooved MHPs, this paper first analyzed the working principle, major heat transfer limits and heat flux distribution law of grooved MHPs in electronic chips with high heat flux concentration, then established a mathematic model for the working fluid inventory in grooved MHPs. Finally, with distilled water being the working fluid, a series of experimental investigations were conducted at different temperatures to test the heat transfer performances of grooved MHPs, which were perfused with different inventories and with different adiabatic section lengths. The experimental results show that when the value of α is roughly within 0.40±0.05, a grooved MHP can acquire its best heat transfer performance, and the working fluid inventory can be determined by the proposed mathematic model. Therefore this study solves the complicated problem of determining appropriate working fluid inventory for grooved MHPs.

Sign in / Sign up

Export Citation Format

Share Document