scholarly journals Electronic nose system for rancidity and insect monitoring of brown rice

2020 ◽  
Vol 187 ◽  
pp. 04015
Author(s):  
Natawut Neamsorn ◽  
Viboon Changrue ◽  
Yaowalak Chanbang ◽  
Kaewalin Kunasakdakul ◽  
Parichat Theanjumpol ◽  
...  

Electronic nose system was designed and fabricated for classification of rancidity and pest damages in brown rice. The electronic nose system was included gas handling system, sensors array and data acquisition and processing system. Response signal from sensors array was recorded and processed. The results showed that the E-nose could classify normal and rancid brown rice (KDML105) and the classification model had Rv2 = 0.92 and SEP = 0.14. The model also gave satisfactory result for classification of brown rice which was damaged by insects (Tribolium castaneum) with Rv2 =0.98 and SEP = 0.06. It was possible to use electronic nose as the quality monitoring system during storage of KDML105 brown rice.

2020 ◽  
Vol 66 (No. 3) ◽  
pp. 97-103
Author(s):  
Farel Ahadyatulakbar Aditama ◽  
Lalu Zulfikri ◽  
Laili Mardiana ◽  
Tri Mulyaningsih ◽  
Nurul Qomariyah ◽  
...  

The aim of the present study is the development of an electronic nose system prototype for the classification of Gyrinops versteegii agarwood. The prototype consists of three gas sensors, i.e., TGS822, TGS2620, and TGS2610. The data acquisition and quality classification of the nose system are controlled by the Artificial Neural Network backpropagation algorithm in the Arduino Mega2650 microcontroller module. The testing result shows that an electronic nose can distinguish the quality of Gyrinops versteegii agarwood. The good-quality agarwood has an output of [1 –1], while the poor-quality agarwood has an output of [–1 1].


Author(s):  
Santi Sankar Chowdhury ◽  
Bipan Tudu ◽  
Rajib Bandyopadhyay ◽  
Nabarun Bhattacharyya

2013 ◽  
Vol 475-476 ◽  
pp. 524-527
Author(s):  
Xiu Ying Ma ◽  
Yun Xiang Liu ◽  
Wan Jun Yu

The construction of Electronic Nose system and associated signal processing methods were introduced .Then special references to applications to dairy products, such as the classification of different milk, the milk with different shelf-lives, flavor quality evaluation, antibiotics resedues detection and quality control were discussed. The results show that the quality of dairy products can be evaluated effectively using Electronic Nose system. The development trends of Electronic Nose are presented.


The main objective of this work is to design electronic nose system (E-Nose) which detects the odour and freshness of different fruits such as mango, pineapple, orange which are mainly used in food manufacturing industries. E-Nose system consists of sensor array of two with each sensor respond to different types of odours. These sensor data is analyzed with the K-nearest neighbour algorithm (K-NN Algorithm) using MATLAB for identification of different fruits. Freshness of fruit juice is determined by the measurement of pH value of juice by using pH electrode


Sensors ◽  
2010 ◽  
Vol 10 (10) ◽  
pp. 9179-9193 ◽  
Author(s):  
Kea-Tiong Tang ◽  
Shih-Wen Chiu ◽  
Chih-Heng Pan ◽  
Hung-Yi Hsieh ◽  
Yao-Sheng Liang ◽  
...  

Author(s):  
V J Pandurangi ◽  
Manjunath Managuli ◽  
Sudha Salakhe ◽  
Sadhana Bangarshetti ◽  
Pavan N. Kunchur

1990 ◽  
Vol 51 (C2) ◽  
pp. C2-939-C2-942 ◽  
Author(s):  
N. DINER ◽  
A. WEILL ◽  
J. Y. COAIL ◽  
J. M. COUDEVILLE

2020 ◽  
Vol 17 (4) ◽  
pp. 497-506
Author(s):  
Sunil Patel ◽  
Ramji Makwana

Automatic classification of dynamic hand gesture is challenging due to the large diversity in a different class of gesture, Low resolution, and it is performed by finger. Due to a number of challenges many researchers focus on this area. Recently deep neural network can be used for implicit feature extraction and Soft Max layer is used for classification. In this paper, we propose a method based on a two-dimensional convolutional neural network that performs detection and classification of hand gesture simultaneously from multimodal Red, Green, Blue, Depth (RGBD) and Optical flow Data and passes this feature to Long-Short Term Memory (LSTM) recurrent network for frame-to-frame probability generation with Connectionist Temporal Classification (CTC) network for loss calculation. We have calculated an optical flow from Red, Green, Blue (RGB) data for getting proper motion information present in the video. CTC model is used to efficiently evaluate all possible alignment of hand gesture via dynamic programming and check consistency via frame-to-frame for the visual similarity of hand gesture in the unsegmented input stream. CTC network finds the most probable sequence of a frame for a class of gesture. The frame with the highest probability value is selected from the CTC network by max decoding. This entire CTC network is trained end-to-end with calculating CTC loss for recognition of the gesture. We have used challenging Vision for Intelligent Vehicles and Applications (VIVA) dataset for dynamic hand gesture recognition captured with RGB and Depth data. On this VIVA dataset, our proposed hand gesture recognition technique outperforms competing state-of-the-art algorithms and gets an accuracy of 86%


Sign in / Sign up

Export Citation Format

Share Document