scholarly journals Ultrasonic-assisted Extraction, Antioxidant Activity and Structural Characterization of Polysaccharides from Oenothera Biennis L. Leaves

2020 ◽  
Vol 189 ◽  
pp. 02025
Author(s):  
Zhou Yong Dong ◽  
Xin Song Yin ◽  
Shu Lin Liu ◽  
Tie Hua Zhang ◽  
Hui Ren ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Average Molecular Weight ◽  
Reducing Power ◽  
Ultrasonic Power ◽  
Oenothera Biennis ◽  
Scavenging Effect ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction

This paper studies the optimization of ultrasonic-assisted extraction of polysaccharides from Oenothera biennis L. leaves using Box-Behnken design, and their in vitro antioxidant activity and structure. It is demonstrated that the optimum extraction conditions are: the ultrasonic power at 400 W, solvent-tosample ratio of 23:1 (mL/g), ultrasonication temperature at 53 °C, and time for 36 min, under which the yield of polysaccharides from Oenothera biennis L. leaves, namely 3.54%, remains close to the predicted value in the model. The assays of the scavenging effect on DPPH and hydroxyl free radicals, and of the reducing power indicate that polysaccharides from Oenothera biennis L. leaves possess strong antioxidant activity and certain relationship exists between their dose and effect in the concentration range of the experiment; Fourier IR spectroscopy reveals that characteristic absorption peak of polysaccharides can be seen from the sample; the DE-52 cellulose column chromatography, HPLC profiles, and GC-MS chromatogram identify the obtained OCP-2 as heteropolysaccharides, whose major components, including arabinose, mannose, galactose, and talose, have an average molecular weight of 5435 Da.

scholarly journals Flavonoids Extraction fromTaraxacum officinale(Dandelion): Optimisation Using Response Surface Methodology and Antioxidant Activity

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Zongxi Sun ◽  
Ruiqiang Su ◽  
Jianwei Qiao ◽  
Zhiquan Zhao ◽  
Xinsheng Wang
Keyword(s):  
Antioxidant Activity ◽  
Response Surface ◽  
Extraction Yield ◽  
Solid Ratio ◽  
Plant Resource ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Macroporous Adsorption Resin ◽  
Ultrasonic Assisted Extraction

The Box-Behnken design combined with response surface method was employed to optimize ultrasonic-assisted extraction of flavonoids fromTaraxacum officinale. The optimized results showed that the highest extraction yield with ultrasonic-assisted extraction could reach 2.62% using 39.6% (v/v) ethanol and 59.5 : 1 (mL/g) liquid-solid ratio for 43.8 min. The crude extract was then purified by HPD-100 macroporous adsorption resin, and the flavonoids content in the purified extract increased to 54.7%. The antioxidant activity of the purified flavonoids was evaluatedin vitroby scavenging capacity of ABTS or DPPH,β-carotene bleaching, and FTC test. The knowledge obtained from this study should be useful to further develop and apply this plant resource.

scholarly journals Optimization of Ultrasonic-Assisted Extraction, Characterization, and Antioxidant Activities of Polysaccharides From Sojae Semen Praeparatum

2021 ◽  
Vol 16 (5) ◽  
pp. 1934578X2110206
Author(s):  
Yongshuai Jing ◽  
Ruijuan Zhang ◽  
Lan Li ◽  
Danshen Zhang ◽  
Yu Liu ◽  
...  
Keyword(s):  
Antioxidant Activities ◽  
Deae Cellulose ◽  
Chemical Compositions ◽  
Hydroxyl Groups ◽  
Ultrasonic Frequency ◽  
Ultrasonic Power ◽  
Assisted Extraction ◽  
Ultrasonic Time ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction

In this study, response surface methodology (RSM) was used to optimize the ultrasonic-assisted extraction parameters of Sojae Semen Praeparatum polysaccharides (SSPP-80), the optimum conditions were determined as follows: ultrasonic frequency of 100 W, ultrasonic power of 80 Hz, ultrasonic temperature of 52℃, ultrasonic time of 23 minutes, and liquid to raw material ratio of 40 mL/g. Based on these conditions, polysaccharides extraction rate was 7.72% ± 0.26%. Then, 2 novel polysaccharides (SSPP-80‐1, SSPP-80‐2) were isolated from SSPP by DEAE-cellulose 52 chromatography. The chemical compositions, physicochemical properties, and structure of SSPPs were investigated by simultaneous thermal analyzer (TGA), scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FI-IR), and high-performance liquid chromatography (HPLC). The results showed that SSPP-80 and 2 fractions were mainly composed of mannose (Man), glucose (Glc), galactose (Gal), xylose (Xyl), and arabinose (Ara). In addition, the antioxidant activities were evaluated against the DPPH and hydroxyl radical in vitro, the IC50 of SSPP-80, SSPP-80‐1 and SSPP-80‐2 against DPPH free radical were 4.407, 8.267, and 5.204 mg/mL, respectively, whereas the IC50values for removing hydroxyl groups were 5.318, 3.516, and 4.016 mg/mL, respectively. It demonstrated that SSPP-80 and 2 fractions had certain antioxidant activity. Theoretical basis for use of Sojae Semen Praeparatum polysaccharides was provided by this study.

scholarly journals Optimization of ultrasonic-assisted extraction of inulin from Jerusalem artichoke

2019 ◽  
Vol 78 ◽  
pp. 02007
Author(s):  
Lina Yang ◽  
Hongyun Zhang ◽  
Jinghang Huang ◽  
Yafan Zhao ◽  
Danshi Zhu ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Jerusalem Artichoke ◽  
Hot Water ◽  
Ultrasonic Power ◽  
Hot Water Extraction ◽  
Box Behnken Design ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction

An efficient ultrasonic-assisted extraction of inulin from Jerusalem artichoke was investigated by Response Surface Methodology (RSM). The results showed that the yield of ultrasonic-assisted extraction was 62.07 ± 0.39% over the microwave (40.85 ± 0.28%) and hot water extraction (27.42 ± 0.42%). The Box-Behnken Design (BBD) was used to optimize the effects of three parameters (temperature-X1, ultrasonic power-X2 and time-X3) on inulin yield. Analysis of variance showed that the contributions of X1, X3, X12, X13, X22 were significant. The optimal yield of inulin was 82.93 ± 1.03% at 82 °, 120 W and 18 min.

Optimization of Ultrasonic-Assisted Extraction of Total Saponins from Ophiopholis mirabilis Using Response Surface Methodology

2013 ◽  
Vol 781-784 ◽  
pp. 687-693
Author(s):  
Zhi Yang Shao ◽  
Jin Xia Fu ◽  
Yan Xia Qi ◽  
Qian Cheng Zhao ◽  
Zhi Bo Li
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Water Bath ◽  
Ultrasonic Power ◽  
Extraction Technology ◽  
Assisted Extraction ◽  
Ultrasonic Time ◽  
Ultrasonic Assisted ◽  
Ultrasonic Assisted Extraction

Ultrasonic-Assisted extraction (UAE) was applied for saponins extraction from Ophiopholis mirabilis and response surface methodology (RSM) was used to optimize the extraction technology. A first set of experiments were designed to optimize water bath temperature, ethanol concentration, the ratio of liquid to solid, ultrasonic time (min) and ultrasonic power (W) as the main variables affecting the extraction effect. A Box-Behnken design consisting of 15 experimental runs was then applied and a second-order polynomial model was used to explain the interactions between the main factors and the yield of saponins. The developed mathematical model was found to fit well with the experimental data and the optimized conditions were ultrasonic pretreatment time 30.9 min, ethanol concentration 64%, liquid /solid ratio 35:1, ultrasonic power 300W and water bath 70°C. Corresponding saponins content was 0.574%.

Sign in / Sign up

Export Citation Format

Share Document