scholarly journals Optimization of Ultrasonic-Assisted Extraction, Characterization, and Antioxidant Activities of Polysaccharides From Sojae Semen Praeparatum

2021 ◽  
Vol 16 (5) ◽  
pp. 1934578X2110206
Author(s):  
Yongshuai Jing ◽  
Ruijuan Zhang ◽  
Lan Li ◽  
Danshen Zhang ◽  
Yu Liu ◽  
...  

In this study, response surface methodology (RSM) was used to optimize the ultrasonic-assisted extraction parameters of Sojae Semen Praeparatum polysaccharides (SSPP-80), the optimum conditions were determined as follows: ultrasonic frequency of 100 W, ultrasonic power of 80 Hz, ultrasonic temperature of 52℃, ultrasonic time of 23 minutes, and liquid to raw material ratio of 40 mL/g. Based on these conditions, polysaccharides extraction rate was 7.72% ± 0.26%. Then, 2 novel polysaccharides (SSPP-80‐1, SSPP-80‐2) were isolated from SSPP by DEAE-cellulose 52 chromatography. The chemical compositions, physicochemical properties, and structure of SSPPs were investigated by simultaneous thermal analyzer (TGA), scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FI-IR), and high-performance liquid chromatography (HPLC). The results showed that SSPP-80 and 2 fractions were mainly composed of mannose (Man), glucose (Glc), galactose (Gal), xylose (Xyl), and arabinose (Ara). In addition, the antioxidant activities were evaluated against the DPPH and hydroxyl radical in vitro, the IC50 of SSPP-80, SSPP-80‐1 and SSPP-80‐2 against DPPH free radical were 4.407, 8.267, and 5.204 mg/mL, respectively, whereas the IC50values for removing hydroxyl groups were 5.318, 3.516, and 4.016 mg/mL, respectively. It demonstrated that SSPP-80 and 2 fractions had certain antioxidant activity. Theoretical basis for use of Sojae Semen Praeparatum polysaccharides was provided by this study.

2018 ◽  
Vol 2018 ◽  
pp. 1-6
Author(s):  
Haitang Wang ◽  
Lin Shi ◽  
Xiaoyu Yang ◽  
Rui Hong ◽  
Liang Li

Physalis pubescens L. is rich in natural pigments but has not yet been fully utilized. Ultrasound-assisted extraction of yellow pigment from Physalis pubescens L. was investigated by response surface methodology in this study. Optimal parameters were ultrasonic power of 29.21%, ultrasonic time of 14.41 min, and ultrasonic interval time of 10.55 s. The yield was 0.193% under optimal parameters. FRAP, ABTS, and superoxide radical scavenging activity of the yellow pigment were 6.11 ± 0.22 mmol/g, 2.80 ± 0.27 mmol/g, and 57281.5 ± 2749.5 U/g, respectively. The results showed that the yield of yellow pigment could be improved by ultrasonic-assisted extraction and the yellow pigment extracted by ultrasound had antioxidant activity.


2013 ◽  
Vol 781-784 ◽  
pp. 687-693
Author(s):  
Zhi Yang Shao ◽  
Jin Xia Fu ◽  
Yan Xia Qi ◽  
Qian Cheng Zhao ◽  
Zhi Bo Li

Ultrasonic-Assisted extraction (UAE) was applied for saponins extraction from Ophiopholis mirabilis and response surface methodology (RSM) was used to optimize the extraction technology. A first set of experiments were designed to optimize water bath temperature, ethanol concentration, the ratio of liquid to solid, ultrasonic time (min) and ultrasonic power (W) as the main variables affecting the extraction effect. A Box-Behnken design consisting of 15 experimental runs was then applied and a second-order polynomial model was used to explain the interactions between the main factors and the yield of saponins. The developed mathematical model was found to fit well with the experimental data and the optimized conditions were ultrasonic pretreatment time 30.9 min, ethanol concentration 64%, liquid /solid ratio 35:1, ultrasonic power 300W and water bath 70°C. Corresponding saponins content was 0.574%.


2014 ◽  
Vol 1051 ◽  
pp. 423-427
Author(s):  
Jun Sen Wu ◽  
Chen Chen Liu ◽  
Bing Li ◽  
Xiu Zhi Wan

The 90% acetone as extraction agent used in order to obtain the ultrasonic assisted extraction conditions of chlorophyll a. The ultrasonic power, ultrasonic time, centrifugation time and rotational speed as the four study factors and the chlorophyll a concentration as the target, here, the L9(34) orthogonal table of orthogonal experiment design are used in order to determine the optimum extraction contractions, basing on the single factor experiment. The experimental results shows the algae containing water can get better extraction effect, after ultrasonic 30 minutes in 225W and 6000r/min speed centrifugal 9 minutes and then mixing, repeat ultrasound centrifugation steps.


2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Xiaowei Sun ◽  
Zhimin Jin ◽  
Lei Yang ◽  
Jingwei Hao ◽  
Yuangang Zu ◽  
...  

An ionic liquid-based ultrasonic-assisted extraction method has been developed for the effective extraction of procyanidins fromLarix gmeliniibark. So as to evaluate the performance of ionic liquids in ultrasonic-assisted extraction process, the effects caused by changes in the anion and the alkyl chain length of the cation on the extraction efficiency were investigated in this paper. The results indicated that the characteristics of anions had remarkable effects on the extraction efficiency of procyanidins, and 1-butyl-3-methylimidazolium bromide ([Bmim]Br) aqueous solution was the best among the investigated ionic liquids. The optimum conditions for the extraction were as follows: [Bmim]Br concentration 1.25 M, soak time 3 h, solid-liquid ratio 1 : 10, ultrasonic power 150 W, and ultrasonic time 30 min. This work not only introduces a simple, green, and highly efficient sample preparation method for extraction of procyanidins fromL. gmeliniibark, but also reveals the tremendous application potential of ionic liquids.


2013 ◽  
Vol 864-867 ◽  
pp. 549-552 ◽  
Author(s):  
Ming Wu ◽  
Chuan Fu Ma ◽  
Jun Man Kan ◽  
Li Quan Guo

Ultrasonic-assisted extraction (UAE) method was used to polysaccharides from Radix Astragali (RAP), and the orthogonal test was applied to optimize extraction conditions. Furthermore, the antioxidant activities of RAP were evaluated by DPPH and superoxide anion radical scavenging activities assay. The results indicated that the optimal conditions for RAP extraction as followings: solid/liquid ratios of 1:20, extraction time of 10 min, ultrasonic power of 65 W and extraction temperature of 60°C. Meanwhile, RAP had relatively higher scavenging activities on DPPH and superoxide anion radicals.


2014 ◽  
Vol 602-605 ◽  
pp. 81-85 ◽  
Author(s):  
Zuo Ren Liu ◽  
Yan Fen Zhang ◽  
Yong Guang Bi ◽  
Hai Ling Li

Litsea cubeba fruit as raw material in this experiment, the use of ultrasonic-assisted method of litsea cubeba oil extraction process are discussed. The effects of several ultrasonic processing parameters, such as ratio of liquid to solid, extraction temperature, ultrasonic power and extraction time on the extraction of litsea cubeba oil were investigated assisted by ultrasonic wave. And the L9 (34) orthogonal test was used to research this four factors, the result from the visual analysis indicated that the optimal extraction process was gotten when ratio of liquid to solid was 14:1 , ultrasonic time was 50min, ultrasonic power is 320W, ultrasonic temperature is 60 °C.Those experimental results showed that ultrasonic-assisted extraction of the Litsea cubeba oil is practicable, and this method is simple and efficient. With the preliminary investigation of the ultrasonic-assisted extraction of Litsea Cubeba oil, the oil yield reached up to 41.35%, this value is the highest of all the oil yields from the current oil extraction methods, and it is worthy of further exploration .


Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2309 ◽  
Author(s):  
Liling Wang ◽  
Minge Bai ◽  
Yuchuan Qin ◽  
Bentong Liu ◽  
Yanbin Wang ◽  
...  

Ionic liquids (ILs), known as environmentally benign “green” solvents, were developed as an optimal solvent for the green extraction and separation field. In this paper, an ionic liquid-based ultrasonic-assisted extraction (IL-UAE) of flavonoids (FVs) from bamboo leaves of Phyllostachys heterocycla was developed for the first time. First, 1-butyl-3-methylimidazolium bromide ([Bmim] Br), with the best extraction efficiency, was selected from fifteen ionic liquids with diverse structure, like carbon chains or anions. Then, the influencing parameters of ionic liquid (IL) concentration, liquid-solid ratio, ultrasonic time, and ultrasonic power, were investigated by single factor tests, and further optimized using response surface methodology (RSM). In the optimization experiment, the best conditions were 1.5 mol/L [BMIM]Br aqueous solution, liquid-solid ratio 41 mL/g, ultrasonic time 90 min, and ultrasonic power 300 W. Furthermore, the microstructures of bamboo leaves and the recovery of FVs and [BMIM]Br were also studied. Therefore, this simple, green and effective IL-UAE method has potentiality for the extraction of FVs from bamboo leaves for the large-scale operations.


Molecules ◽  
2019 ◽  
Vol 24 (9) ◽  
pp. 1699 ◽  
Author(s):  
Mengjun Shi ◽  
Juanjuan Zhang ◽  
Cunyu Liu ◽  
Yiping Cui ◽  
Changqin Li ◽  
...  

Psoralea Fructus is widely used in traditional Chinese medicine (TCM), and the content of psoralen, isopsoralen, neobavaisoflavone, bavachin, psoralidin, isobavachalcone, and bavachinin A is the main quality control index of Psoralea Fructus because of its clinical effects. Thus, a fast and environmentally-benign extraction method of seven compounds in Psoralea Fructus is necessary. In this work, an ionic liquid-based ultrasonic-assisted method (ILUAE) for the extraction of seven compounds from Psoralea Fructus was proposed. Several ILs of different types and parameters, including the concentration of ILs, concentration of ethanol (EtOH), solid–liquid ratio, particle size, ultrasonic time, centrifugal speed, and ultrasonic power, were optimized by the Placket–Burman (PB) design and Box–Behnken response surface analysis. Under this optimal condition, the total extraction yield of the seven compounds in Psoralea Fructus was 18.90 mg/g, and significantly greater than the conventional 75% EtOH solvent extraction.


2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Xiaonan Zhang ◽  
Qingfeng Ban ◽  
Xibo Wang ◽  
Zhongjiang Wang

We adopted and developed an ultrasonic-assisted extraction method to obtain polysaccharides from tree peony pods using polyethylene glycol (PEG) as the solvent. The technological parameters have been designed as a single factor to enhance the tree peony pod polysaccharide extraction yield. Specific conditions (ultrasound irradiation power, 250 W; ultrasound irradiation time, 30 min; reaction temperature 50°C; liquid-solid ratio, 25 mL/g; and concentration of PEG, 0.2 g/mL) generated an experimental yield of 14.14%  ± 0.44%. Subsequently, the monosaccharide composition of the tree peony pod polysaccharides was determined by HPLC using a 1-phenyl-3-methyl-5-pyrazolone precolumn derivatization method. The results indicated that tree peony pod polysaccharides contained mannoses, rhamnose, glucuronic acid, galacturonic acid, glucose, galactose, arabinose, and fucose with a molar ratio of 1.44 : 2.87 : 0.32 : 18.99 : 3.99 : 10.21 : 0.96 : 1.85 : 0.21. The tree peony pod polysaccharides obtained are mainly galacturonic acid and galactose, which are acidic polysaccharides. Finally, the antioxidant activities (DPPH and FRAP) of the tree peony pod polysaccharides were assessed, and the compounds exhibited moderate antioxidant activities.


2019 ◽  
Vol 78 ◽  
pp. 02007
Author(s):  
Lina Yang ◽  
Hongyun Zhang ◽  
Jinghang Huang ◽  
Yafan Zhao ◽  
Danshi Zhu ◽  
...  

An efficient ultrasonic-assisted extraction of inulin from Jerusalem artichoke was investigated by Response Surface Methodology (RSM). The results showed that the yield of ultrasonic-assisted extraction was 62.07 ± 0.39% over the microwave (40.85 ± 0.28%) and hot water extraction (27.42 ± 0.42%). The Box-Behnken Design (BBD) was used to optimize the effects of three parameters (temperature-X1, ultrasonic power-X2 and time-X3) on inulin yield. Analysis of variance showed that the contributions of X1, X3, X12, X13, X22 were significant. The optimal yield of inulin was 82.93 ± 1.03% at 82 °, 120 W and 18 min.


Sign in / Sign up

Export Citation Format

Share Document