scholarly journals Experimental study of moving liquid layer evaporation under gas flow into rectangular minichannel

2017 ◽  
Vol 159 ◽  
pp. 00033 ◽  
Author(s):  
Vyacheslav Maksimov ◽  
Takhir Sharifulin ◽  
Larisa Zhidkova ◽  
Karapet Eloyan
Keyword(s):  
Experimental Study ◽  
Liquid Layer ◽  
Gas Flow ◽  
Moving Liquid

scholarly journals The effect of the liquid layer thickness on the evaporation intensity

2018 ◽  
Vol 194 ◽  
pp. 01030
Author(s):  
Aleksei Kreta ◽  
Vyacheslav Maksimov
Keyword(s):  
Experimental Study ◽  
Layer Thickness ◽  
Liquid Layer ◽  
Flow Rate ◽  
Gas Flow ◽  
Shear Stresses ◽  
Gas Velocity ◽  
Evaporation Intensity ◽  
Liquid Layer Thickness ◽  
Thermocapillary Forces

An experimental study of the influence of thermo-capillary forces and shear stresses with the side of the gas flow to the evaporation flow rate has been made. The experiments were carried out at various thicknesses of the liquid layer and constant gas velocity. The influence of the thickness of the liquid layer on the evaporation flow rate (the intensity of evaporation) has been analyzed. It is shown that the thermocapillary forces have a direct effect on the evaporation flow rate of the liquid layer.

Experimental Study of Bubble Behaviour in a Flowing Liquid Layer

2021 ◽  
Author(s):  
Zhengzheng Zhang ◽  
Liangxing Li ◽  
Shuanglei Zhang ◽  
Muhammad Afnan Saleem
Keyword(s):  
Experimental Study ◽  
Liquid Layer ◽  
Flowing Liquid ◽  
Bubble Behaviour

Experimental Study on Roughness Effect for Laminar Micro-Channel Gas Flow

2001 ◽  
Author(s):  
Jih-Hsing Tu ◽  
Fangang Tseng ◽  
Ching-Chang Chieng
Keyword(s):  
Experimental Study ◽  
Surface Roughness ◽  
Friction Factor ◽  
Gas Flow ◽  
Micro Channel ◽  
Micro Machining ◽  
Roughness Effect ◽  
Relative Roughness ◽  
Smooth Channel ◽  
Micro Channels

Abstract Present study investigates the roughness effect on laminar gas flow for microchannels ranging from 40 to 600 μm with various roughness heights (40–82 nm) by systematical experiments. The micro-channels are manufactured by micro-machining technology and KOH anisotropic etching is employed to achieve various roughness patterns. Experimental results shows that higher product levels of Reynolds number (Reh) and friction factor (f) are obtained for microchannels of larger size and smaller relative roughness and friction factor f approaches to laminar flow theory value f0 for very smooth channel but the ratio of (f/f0) decreases as the surface roughness increases.

scholarly journals Experimental study of heat and mass transfer coefficients at heat recovery of steam-gas flow in the torch of drops of mechanical nozzle

2015 ◽  
Vol 6 (8(78)) ◽  
pp. 50
Author(s):  
Артур Юрьевич Рачинский ◽  
Михаил Константинович Безродный ◽  
Николай Никифорович Голияд ◽  
Петр Алексеевич Барабаш
Keyword(s):  
Mass Transfer ◽  
Experimental Study ◽  
Heat And Mass Transfer ◽  
Heat Recovery ◽  
Gas Flow ◽  
Transfer Coefficients ◽  
Mass Transfer Coefficients

Experimental study of impact of anisotropy and heterogeneity on gas flow in coal. Part I: Diffusion and adsorption

Fuel ◽  
2018 ◽  
Vol 232 ◽  
pp. 444-453 ◽  
Author(s):  
Yuling Tan ◽  
Zhejun Pan ◽  
Jishan Liu ◽  
Jianhong Kang ◽  
Fubao Zhou ◽  
...  
Keyword(s):  
Experimental Study ◽  
Gas Flow

Solute collection after off-line supercritical fluid extraction into a moving liquid layer

1994 ◽  
Vol 685 (1) ◽  
pp. 113-119 ◽  
Author(s):  
Jin Veji-osta ◽  
Josef Planeta ◽  
Milena Mikešová ◽  
Alena Ansorgová ◽  
Pavel Karásek ◽  
...  
Keyword(s):  
Supercritical Fluid Extraction ◽  
Supercritical Fluid ◽  
Liquid Layer ◽  
Fluid Extraction ◽  
Moving Liquid
Sign in / Sign up

Export Citation Format

Share Document