scholarly journals Plus Shaped Chipless RFID Tag

2021 ◽  
Vol 40 ◽  
pp. 01004
Author(s):  
Vinay Ganesh Bhagure ◽  
Somdotta Roy Choudhury
Keyword(s):  
Internet Of Things ◽  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Future Internet ◽  
Rfid Tags ◽  
Rfid Technology ◽  
Rfid Tag ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
Radio Frequency Waves

Chip-less radio frequency identification (RFID) technology is capable for detecting, identification, and chasing for the future Internet of Things (IoT) systems and applications. The chipless RFID technology gives us the impression as a rising substitute of the traditional RFID tags and barcodes by encoding data from tags employing the radio frequency waves. The paper presents the design as well as simulation of chip-less Plus shaped RFID tags. The structure is composed of Rogers RT/Duroid 5880 by means of a substrate having the physical dimensions 40mm x 40mm over which eight resonators are placed. This tag is compact, and the resonators are closely placed. The tag is designed using Ansys Electronics Desktop.

scholarly journals Smart Bag based on RFID and Internet of Things

2021 ◽  
Author(s):  
Amarjeet Singh Chauhan ◽  
Dayal Nigam
Keyword(s):  
Internet Of Things ◽  
Radio Frequency ◽  
Real Time ◽  
Radio Frequency Identification ◽  
Load Cell ◽  
Rfid Technology ◽  
Rfid Tag ◽  
The Real ◽  
Frequency Identification ◽  
The Guardian

The Smart Bag is a very innovative and helpful project that uses RFID Technology [1] for identifying books / items smartly. The Radio Frequency Identification sensor uses a reader to get information about the item from a tag attached to it. Smart Bag initially used this technology. Technologies or devices which are used in development of The Smart Bag are RFID Sensor, HX711 Load Cell Sensor, NodeMCU, Arduino, and GPS. The Books / items can be identified by using RFID tag and it will store the count of books / items to its memory and matches the items according to schedule. The circuit for communication comprises of NodeMCU and RFID receiver in which passing of messages / alerts, reading of books / item is done. When the books / items are placed inside the bag, the RFID receiver reads the RFID Tag and sends the Books / items in the bag to the NodeMCU [2]. The NodeMCU compares it with the schedule list. If any book / item is missing then the NodeMCU generates an alert of missing books / item. The smart bag has GPS function also, which sends the Real-time Location of a Bag or a Kid to the Guardian or Parents. Initially, this project is for those small kids who regularly go to school.

scholarly journals Elegant System for Library Management using RFID

2018 ◽  
Vol 7 (3.1) ◽  
pp. 133
Author(s):  
D Pradeepa ◽  
R Valarmady ◽  
S G Rajasekar
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Rfid Tags ◽  
Library Management ◽  
Frequency Identification ◽  
Radio Frequency Waves ◽  
Rfid Readers

Radio Frequency Identification (RFID) implies a system that exchanges the data remotely, utilizing radio frequency waves. It is programmed identification innovation. This paper is about RFID based system for library management that permits quick exchange stream and will make simple to deal with the exercises like issue and return of books from the library absent much manual intercession. This system depends on RFID readers and detached RFID tags that can store the data electronically which can be perused by the RFID readers. This system will influence clients to issue to and return of books through RFID tags simple and furthermore ascertain the comparing fine connected with the timeframe the nonappearance of the book from the library.  

RFID Tag Area Management Base on IOT

2013 ◽  
Vol 756-759 ◽  
pp. 4529-4532 ◽  
Author(s):  
Hao Zeng ◽  
Yan Hui Fu ◽  
Xu Chen
Keyword(s):  
Internet Of Things ◽  
Radio Frequency ◽  
Radio Frequency Identification ◽  
The Internet ◽  
Rfid Tag ◽  
Frequency Identification ◽  
The Right ◽  
The Internet Of Things ◽  
Area Management

Traditional Radio Frequency Identification (RFID) Tag Equipment has some problems like these: it is difficult to realize if the tag is kept out, destroyed, or taken away abnormally. It cant accurately judge where the area the tag had moved to is. Besides, it is difficult to distinguish the right of the tag in the Tag Management. To solve these issues, this paper serves with a method which is based on the Internet of Things (IOT). It mainly includes as the following: the tag is activated in the Controlled Area, the judgment of the tag access the Controlled Area, whether the tag exists in the Controlled Area or not. These methods can reform the problems that the Traditional RFID Tag Equipment has.

scholarly journals Miniaturized Chipless RFID Tags Based on Periodically Loaded Microstrip Structure

2019 ◽  
Vol 9 (5) ◽  
pp. 4679-4684
Author(s):  
M. Added ◽  
K. Rabaani ◽  
S. Chabaan ◽  
N. Boulejfen
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
Resonant Circuit ◽  
Rfid Tags ◽  
Frequency Range ◽  
Rfid Tag ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
Coding Capacity ◽  
Microstrip Structure

A compact chipless radio frequency identification (RFID) tag-based on slow-wave technology is introduced in this paper. The tag consists of a resonant circuit based on open stub resonators periodically loaded by shunt stubs allowing a coding capacity of 9 bits and operating in a frequency range from 2 to 4GHz. The receiving and transmitting antennas of the tag are particularly designed to minimize the tag size as much as possible. The proposed tag presents a robust bit pattern with a compact and fully printable structure using FR4 substrate for a low-cost tag.

scholarly journals Asset Management Security System Using RFID Technology

2018 ◽  
Vol 7 (4.6) ◽  
pp. 391
Author(s):  
Soumyasanta Rakshit ◽  
Dr. S. S. Sridhar
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Asset Management ◽  
Building Blocks ◽  
Rfid Technology ◽  
Rfid Tag ◽  
Digital Identification ◽  
Frequency Identification ◽  
Unique Parameter ◽  
Asset Management System

Using radio wave or radio frequency scanners to identify wirelessly any object is not so much complex in reality. The latest version of this technology is known as radio frequency identification or RFID. RFID has three building blocks: small tags built around microchips that carry a digital identification code; The RFID scanners also known as readers, the readers are also known as interrogators and networking hardware and the software to link scanners to the main computer databases that can be in hardware or cloud storage. In this project, we describe the implementation of RFID technology in the platform of asset management system in an organization. Using RFID technology track the all of the assets is the main aim of the project. The RFID interrogators open a serial port and then reads a RFID tag to use it as a unique parameter in the database to access and show the record associated to the RFID chip. Any change is wirelessly synchronized to the main database server.An admin will look after the whole server as an administration. If any new asset is introduced which is not in the main database, when the RFID scanner detects that the admin will get a notification message also in anyway if any asset will tamper by anything or anyone or if someone will try to steal any asset then again, the admin will get a notification message instantly.

An Estimation of Resonant Frequency of a Curving RFID Tag

2011 ◽  
Vol 314-316 ◽  
pp. 1325-1329
Author(s):  
Lei Xu ◽  
Hui Ming Huang
Keyword(s):  
Resonant Frequency ◽  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Rfid Technology ◽  
Rfid Tag ◽  
Coil Inductance ◽  
Rfid System ◽  
Frequency Identification ◽  
Working Frequency

Radio frequency identification (RFID) technology may be applied to cylindrical objects, but the curving of an RFID tag brings on an increase in resonant frequency of the tag antenna. The tag can not function in an excessively curving case, since the deviation of the antenna resonant frequency from working frequency makes a reduction in inductive energy supplied by a transmitter. The variation in antenna resonant frequency is dependant upon column radius of the cylinder and curving angle of the tag. Analytically, it is found that a reduction in central distance, which is determined by column radius and curving angle, between compound straight tracks leads to the decreasing of overall antenna-coil inductance after the curving of the tag. By introducing a curving turn exponent, the overall antenna-coil inductance is calculated. After neglecting the less variation in overall tag capacitance, the antenna resonant frequency may be estimated. The result provides an instruction for designing a curving tag antenna to fit the tag antenna resonant frequency for working frequency of an RFID system.

scholarly journals The Integration of RFID Technology into Business Settings

Proceedings ◽  
2019 ◽  
Vol 21 (1) ◽  
pp. 6
Author(s):  
María Martínez Pérez ◽  
Carlos Dafonte ◽  
Ángel Gómez
Keyword(s):  
Internet Of Things ◽  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Rfid Technology ◽  
Frequency Identification ◽  
Business Sectors

At present, the term Internet of Things (IoT) is a key aspect in determining the sustainability, safety, quality and efficiency of the majority of the most important business sectors in society. The capacity to track processes that are undertaken, facilitates the recording of data of the professionals and clients involved. Identification technologies such as RFID (Radio-Frequency Identification) when integrated into sectorial activities, can generate multiple benefits.

scholarly journals Smart Shopping System with RFID Technology Based on Internet of Things

2020 ◽  
Vol 14 (04) ◽  
pp. 17
Author(s):  
Naseer Ali Hussien ◽  
Saif Abd alradha Alsaidi ◽  
Iman Kadhim Ajlan ◽  
Mohamed Fazil Mohamed Firdhous ◽  
Haider TH. Salim Alrikabi
Keyword(s):  
Internet Of Things ◽  
Radio Frequency ◽  
Radio Frequency Identification ◽  
The Internet ◽  
Business Sector ◽  
Rfid Technology ◽  
Cellular Telephones ◽  
Frequency Identification ◽  
The Internet Of Things ◽  
Structure Code

<p>The Internet of Things (IoT) incorporates most extensive number of innovations and imagines a mixture of things or questions around us that, through one of a kind tending to plans and standard correspondence conventions, consume the ability to connect through one another's also collaborate by their neighbors in the direction of attain regular purposes. The misuse of such a standard has been broadly explored in Internet-related investigates. As a result, a few plans have been suggested that utilization informal organizations to hunt Internet assets, to course activity, or to choose powerful strategies for substance dissemination. The essential understood this knowledge remains persistent locality everywhere us as a diverse carrier of things or articles – i.e. Radio-Frequency identification (RFID) sensors, labels, cellular telephones, actuators, and more – that finished novel inclining to ideas, consume the ability to subordinate through one another besides chip in through their neighbors to realize normal objectives of shopping situation in business sector. Web of Things (IoT) overpowered standard imperfection for structure code, which backing to shopping in business sector or undertaking gathering of most prominent concern and examinant.</p><p> </p>

scholarly journals Three-Wheeled Omnidirectional Robot Localization in RFID-Tag Environments using UFIR Filtering

2021 ◽  
Vol 17 ◽  
pp. 16-21
Author(s):  
Jorge A. Ortega-Contreras ◽  
Yuriy S. Shmaliy ◽  
Jose A. Andrade-Lucio
Keyword(s):  
Radio Frequency Identification ◽  
Finite Impulse Response ◽  
Indoor Navigation ◽  
Measurement Noise ◽  
Rfid Tags ◽  
Robot Localization ◽  
Rfid Technology ◽  
Localization Accuracy ◽  
Rfid Tag ◽  
Frequency Identification

This paper describes a way to improve the indoor navigation of mobile robots using radio frequency identification (RFID) technology. A net of RFID tags is deployed in the navigation space. A measurement system measures distances from the tags to the robot with in the presence of the firstorder Markov-Gauss colored measurement noise (CMN) and is combined with a digital gyroscope to measure the robot heading. To increase the localization accuracy, the Kalman filter (KF) and unbiased finite impulse response (UFIR) modified for CMN are used. It is shown that the navigation system developed is more accurate than the basic one employing the standard KF and UFIR filter

scholarly journals Automatic Authorized Access and Unauthorized Denied Security Data Maintenance for Organization Using RFID Technology

2019 ◽  
pp. 1051-1057 ◽  
Author(s):  
Qutubud Din ◽  
Akhtar Sayed ◽  
Fida Husain Yousafzai ◽  
Jiong Yu
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Integrated Circuit ◽  
Rfid Tags ◽  
Rfid Technology ◽  
Rfid Reader ◽  
Frequency Identification ◽  
Pass Through ◽  
User Friendly ◽  
Authorized Access

Using of this latest RFID (Radio Frequency Identification) technology for an organization to improve the efficiency of organization security and maintain the record automatically. Security is the biggest challenge for everything and everywhere it’s the first priority of organization responsible authorities and they must provide the best way to deal these problems with full confidence. With help of RFID Technology it’s more easy and faster to identify the object is authorized or unauthorized to access or denied from the restricted premises. RFID Technology based on two components RFID Reader (Interrogator) & RFID Tags (Transponder). The tag contains an integrated circuit a unique number that number is assign to the object and it’s become the identification I’D of the object. This is used for processing data, modulating and demodulating the radio frequency signal that is being transmitted to RFID Reader, RFID reader read the tag and send the query to database for comparison of information which are exist in the existing database. The tag information is stored in the database the database is pass the query to micro controller the micro controller is perform operation on the base of object requirement and send back the information to database. The developed software performing functionality automatic and authentic. RFID Tags used as ID (identification number) registered in database is presenting the organization concerned object to allow access to the restricted premises otherwise denied the access inside the organization and saved all movement which pass through at the entrance and provide easily understandable, user-friendly and flexible interface for user. Maintain and update all information automatically. To minimize manually checking and record maintenance headache.

Sign in / Sign up

Export Citation Format

Share Document